Buckinghamshire · England
Floor & skirting joints in Ford, Buckinghamshire
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints in Ford, with a 12-month guarantee on every job. Call for a quick quote.
- Skirting that has pulled away from the floor
- Failed seals where bathroom floors meet baths and panels
- Caulk that has cracked where the floor moves
Floor joint sealing in Ford, done properly
Good floor joints come down to the right product and clean, prepared edges. Old caulk, grout or failed sealant comes out first, the joint is cleaned and backed where needed, then the new sealant goes in. If you have open gaps along the bottom of skirting boards and rigid edge joints in tiled floors, we can put it right.
For a small place like Ford, the journey and access are planned in advance, and the work itself is the same as on any site.
Whatever the size of the job, you get the same 12-month guarantee in Ford and across Buckinghamshire.
- Location
- Ford (HP17)
- Wider area
- Buckinghamshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Different surfaces, different methods
Commercial floors
Commercial washrooms and kitchens have floor joints that get wet constantly. We reseal them with a sealant suited to wet areas.
Skirting boards
Skirting gaps are one of the most common floor joints we seal. We take out any cracked caulk before sealing so the bead sits on a clean surface.
Floor joint sealing around Ford
Across Buckinghamshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Letting a property close to Haddenham & Thame Parkway station? Then open skirting and floor joints collect dirt and water, so seal them while the property is empty. Around Ford, as everywhere, floor joint sealing is only as good as the preparation behind it.
Ford is about 4 miles south-west of Aylesbury, in Buckinghamshire. We provide floor joint sealing to householders, landlords and businesses in Ford, as part of our work across Buckinghamshire. Our area takes in 263 places across Buckinghamshire, large and small. There’s also a page for Oxford, about 15 miles away.
Our applicators cover all of the HP17 postcode area for floor joint sealing. If you need floor joint sealing at a property on Linden Way and Chapel Road or anywhere close by, we can help. We also cover Dinton (1 mile north-west), Upton (1 mile north), Bishopstone (2 miles east), Owlswick (2 miles south-east) and Sedrup (2 miles north-east). Within a short drive, we also cover Aylesbury (4 miles north-east), High Wycombe (11 miles south-east), Chesham (12 miles east), Marlow (15 miles south), Amersham (14 miles south-east) and Beaconsfield (15 miles south-east).
Landmarks near Ford
Around Ford, our work takes us to homes and buildings near The Dinton Hermit Public House. The closest station to Ford is Haddenham & Thame Parkway station, about 2.8 miles west. Well-known places in the area include Dinton Castle (1.6 miles north-west) and National Paralympic Heritage Centre (3.7 miles north-east). Not far away are Beacon Hill and Snakemoor.
What else we do in Ford
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Use furniture pads near skirting
- Check the sealant is paintable before decorating
- Look at floor joints each spring
- Mark off resealed joints in warehouses
Have a look at the joints once the heating season is over. If anything has opened, it’s easy to reseal before they spread.
Sealing a gap while it’s small is a quick job. Ignored, they fill with dirt and open further over time.
Leave it or put it right?
Not every floor joint takes the same sealant: flexible sealant for skirting and tiles, silicone in wet areas, and floor-joint products for concrete. Using the wrong one is why many floor joints fail. Around Ford, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
Why choose Mr Mastic in Ford
- 20+ years of sealant experience
- Tidy, careful work
- Fully insured
- Old sealant always removed completely
Take a look at what affects the cost and what customers say.
Your questions about floor joint sealing in Ford
Do you work for landlords with property near Haddenham & Thame Parkway station?
Yes, we work for landlords and agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear price.
Is Ford in your area for floor joint sealing?
Yes, Ford is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll send you a clear quote.
Where is Mr Mastic based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
What does floor joint sealing cost?
It depends on the job, so we quote each one individually. For a quick quote, call 0345 464 0079 or email us and tell us what needs doing and where.
Why has a gap opened under my skirting?
Floors shrink and settle, especially in the first year or two and through the heating season. Caulk tends to crack; a flexible sealant doesn’t.
Do you seal floor joints in bathrooms and kitchens?
Yes. Wet-area floor joints are sealed with a flexible, water-resistant silicone.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.
What happens on the day
On the day, we start by going over the job with you. We protect the surfaces around the joints before any work starts. The work normally takes a morning or an afternoon for most homes. For a village or hamlet like Ford, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at the gap and the floor type and agree the right sealant.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
Ask for a quote
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job, and we’ll take it from there.
Related advice
For landlords and businesses
Landlords and agents in Ford can book us as well as householders. Sealant work between tenants keeps a property looking cared for.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
What affects the cost of floor joint sealing
Jobs vary more than people expect. The main factors:
- How easy the joints are to reach
- Any working-time requirements on site
- How much there is to do
- How much old sealant there is and how hard it is to remove
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
- The rough size of the job
- Any previous sealing or DIY work
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or drop us an email.
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.