Kent · England
Floor Joint Sealing in Eyhorne Street
Floor joint sealing across Eyhorne Street and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Grout cracking in a straight line across a floor
- Caulk that has cracked where the floor moves
- Perimeter joints in tiled floors filled with grout
Why act early in Eyhorne Street
Left open, concrete joints break down under traffic. A sealed joint supports the edges before they need a bigger repair. Older cottages and farmhouses around Eyhorne Street can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
What you pay reflects the work, not guesswork. That’s why we ask a few questions first and agree the price before starting.
What you get with us
- Colour picked to suit the job
- Old sealant always removed completely
- Arbo and Everbuild products
- 20+ years of sealant experience
Read what affects the cost or what customers say.
How we handle floor joint sealing in Eyhorne Street
Large tiled floors, and those over underfloor heating, often need movement joints. Where one is needed, we rake out the grout along the right line and replace it with flexible sealant coloured to suit the grout. If you are dealing with failed joint filler in concrete floors and caulk that has cracked where the floor moves, we can put it right, whatever the surface.
Around Eyhorne Street, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- Eyhorne Street (ME17)
- Wider area
- Kent
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Different surfaces, different methods
Tiled floors
Large or heated tiled floors need room to move. Where needed, a line of grout is replaced with flexible sealant in a matching colour.
Thresholds
A threshold is where floors and frames meet. We seal them with a flexible sealant that suits both sides.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The process
We keep the work tidy and contained to the area we are working on, so you can get on with your day. The job usually takes a morning or an afternoon for most homes. In a small place like Eyhorne Street, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
Before we arrive
- Let us know about earlier repairs to the joints
- Clear the area around the work
- Let us know about stairs, lifts or work at height
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear quote.
Advice
Common questions in Eyhorne Street
Is Eyhorne Street within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
I let a flat near Hollingbourne station. Can you help?
Yes, we work for landlords and agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Can you match the sealant colour?
Generally, yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before we start.
What should I tell you?
A short description and the location. If we need more, we’ll ask.
Are you insured?
Yes. Full insurance covers our work.
Do you seal kitchen plinths to the floor?
Yes. Wet-area floor joints are sealed with a flexible, water-resistant silicone so water can’t get into the gap.
How much does floor joint sealing cost in Eyhorne Street?
Size, access and the old material all affect the cost. Call for a quick quote.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
What floor joint sealing looks like in Eyhorne Street
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Rented homes near Hollingbourne station change hands often, and open skirting and floor joints collect dirt and water, so seal them while the property is empty. If you look after a building such as Hollingbourne Primary School, entrance and corridor floor joints take a lot of traffic. For buildings such as All Saints Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Eyhorne Street is about 4 miles east of Maidstone, in Kent. If you need floor joint sealing in Eyhorne Street, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We’re based in Crawley and cover Kent, Eyhorne Street included. Across Kent, we cover 922 places, and Eyhorne Street is one of them. We also work in Chelmsford, around 33 miles away.
Jobs for floor joint sealing in ME17 is quoted and booked the same way as anywhere else. Local streets include Eyhorne Street, Tile Fields and Tile Fields Close. If you are just outside Eyhorne Street, we cover Hollingbourne (1 mile north-east), Ashbank (1 mile south-west), Broomfield (1 mile south), Leeds (1 mile south-west) and Broad Street (1 mile north). Within a short drive, we also cover Maidstone (4 miles west), Ashford (13 miles south-east), Sittingbourne (7 miles north-east), Faversham (12 miles east), Minster (13 miles north-east) and Kings Hill (10 miles west).
Local landmarks in Eyhorne Street
Around Eyhorne Street, our work takes us to homes and buildings near Glyder House Sugar Loaves Public House. Eyhorne Street has its own railway station: Hollingbourne station. A little further out are KIMS hospital (3.6 miles north-west) and Leeds Castle (0.9 miles south). Green spaces nearby include Detling Hill.
Landlords, agents and businesses in Eyhorne Street
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
What sealant work cannot fix
In fairness, there are a few things sealant will not fix:
- A tiled floor that needs relaying
- Leaks from a failed tanking system
- Concrete repairs beyond the joint
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Where we work in Eyhorne Street
- Wet room & bathroom floors
- Concrete floor joints
- Skirting boards
- Tiled floors
- Commercial floors
- Thresholds
What affects the cost of floor joint sealing
The quote reflects the job in front of us. We look at:
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
- The number and length of the joints
- How easy the joints are to reach
Combining jobs into one visit is normally more efficient than separate visits. You will get one clear quote for the whole job.
Asking for a quote
Before you ask for a quote, have a think about:
- If someone has resealed it before
- Where the job is, and your postcode
- The rough size of the job
- Any access issues, like height or stairs
Getting a quote is simple: let us know what needs doing and where. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.