Hampshire · England
Fire Rated Sealant in Winchfield Hurst
Fire-stopping gaps in Winchfield Hurst need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Fire seals that have cracked with movement
- Seals cut through by electricians, plumbers or data installers
- Open joints along the top of partitions
Landlord and commercial work in Winchfield Hurst
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
How we handle fire rated sealant in Winchfield Hurst
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. We are often asked to deal with holes left by a change of layout and open gaps behind door architraves, on linear gaps, door frames and plasterboard & masonry.
If you have holiday lets, a converted barn used for business or a community building near Winchfield Hurst, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Winchfield Hurst (RG27)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Different surfaces, different methods
Door frames
Behind most architraves is a gap between frame and wall. We seal any open gap to the product’s tested details.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Common problems we fix in Winchfield Hurst
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. We see plenty of fire stopping that was hurried particularly when it was the last job before handover.
Keep an eye out for any of the following:
- Gaps left after a refit or conversion
- Standard silicone or caulk in a fire-stopping gap
- Cracked or shrunken fire-rated sealant
- Fire stopping disturbed by later work
If you look after a building such as Dogmersfield Church of England Primary School, fire-stopping around service openings should be restored whenever new services go in.
Questions to ask before booking
- How long the guarantee is
- Who turns up on the day
- Is the old sealant removed completely?
- Which sealant they’ll use, and why
Commercial buildings in Winchfield Hurst
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Winchfield station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like Church of St Mary the Virgin are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Winchfield Hurst is about 2 miles west of Fleet, in Hampshire. If you need fire rated sealant in Winchfield Hurst, it’s easy to get a quote: please ring 0345 464 0079 or email us. We are based in Crawley and cover Hampshire, Winchfield Hurst included. Across Hampshire, we cover 683 places, Winchfield Hurst among them. Our Reading page covers work nearby (12 miles or so).
We cover every part of the RG27 postcode area for fire rated sealant. If you need fire rated sealant at a property on Taplin's Farm Lane and The Hurst or anywhere close by, our applicators can take on the job. If you are just outside Winchfield Hurst, we cover Dogmersfield (1 mile south-east), Crookham Village (1 mile south-east), Elvetham (1 mile north-east), Elvetham Heath (2 miles north-east) and Fleet (2 miles east). Larger places within reach include Basingstoke (9 miles west), Farnborough (5 miles east), Aldershot (6 miles south-east), Alton (10 miles south-west), Yateley (5 miles north-east) and Tadley (12 miles north-west).
Near you in Winchfield Hurst
We work in homes and buildings around Calthorpe Park School, The Barley Mow pub and Calthorpe Park, among other places. The nearest railway station is Winchfield station, about 0.9 miles west of the centre. Well-known places in the area include Odiham Castle (3.5 miles south-west) and Hart Shopping Centre (2 miles east). The countryside around Winchfield Hurst includes Dogmersfield Lake and Tundry Hill.
Questions from Winchfield Hurst
Can you help a landlord with a rental near Winchfield station?
Yes. We work for landlords and letting agents as well as homeowners. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Will you come out to Winchfield Hurst?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can I choose the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before any work starts.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent types expand when heated, and they’re one option among several. We use whichever the specification and tested details call for.
Can you quote for more than one area?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Do you do fire sealant around door frames?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame and we will tell you if we spot problems with the door.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that generally means someone at home.
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- Whether old sealant or filler has to be cut out
- Whether there’s mould to deal with
- How much there is to do
- The product the joint needs
Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- How we’d reach the joints
- Any previous sealing or DIY work
- What the problem is, such as mould, gaps, leaks or cracking
- Where the property is
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Places near Winchfield Hurst
What else we do in Winchfield Hurst
How it works
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we’ve agreed what’s being done, we protect the area and start. It normally takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Winchfield Hurst, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Clear items away from the joints we are working on
- Mention any parking rules near the property
- Mention any leaks or damp you’ve noticed
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work before giving you a price.
Advice
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- File the fire-stopping record where your assessor can find it
- Photograph sealed gaps before they’re covered up
- Check whether a sealant can be painted before decorating over it
- Look in service cupboards and ceiling voids from time to time
Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Have it sealed, then keep the record so the item can be closed.