East Lothian · Scotland

Fire-rated sealant in Whitekirk, East Lothian

Intumescent and fire-rated sealant around gaps, frames and service penetrations for Whitekirk, backed by a one-year guarantee. Ask us for a quote.

  • Holes left by a change of layout
  • Gaps flagged on a fire risk assessment
  • Unsealed gaps where pipes and cables go through a wall

Fire rated sealant for Whitekirk homes and businesses

Aftercare tips

To keep the joints looking good and working properly:

  • Store the list of sealed gaps with your building paperwork
  • Keep general-purpose foam and caulk away from fire-stopping gaps
  • Check risers, ceiling voids and cupboards during building checks
  • Plan fire stopping into any work that goes through walls or floors

Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t and we’ll tell you which one you have.

It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the job gets bigger.

Fire rated sealant in Whitekirk, done properly

We can work through a building room by room or floor by floor. That record is useful for your files and for whoever looks at the building next. If you have fire stopping disturbed by later work and old fire sealant that has split or come away, we can put it right, on linear gaps, plasterboard & masonry and pipe & cable gaps alike.

If you look after holiday lets, a guest house or a community building in or near Whitekirk, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.

Place
Whitekirk (EH42)
Wider area
East Lothian
Cover
12 months on all our work
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

How the job changes by surface

Door frames

We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist and we will mention anything we notice.

Plasterboard walls

Many fire-resisting walls in flats, offices and conversions are plasterboard. The sealant has to be one tested in plasterboard for each gap size.

Landlord and commercial work in Whitekirk

We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.

Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.

Whitekirk: your questions answered

Are the rules for fire-rated sealant different in Scotland?

Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.

Will you come out to Whitekirk?

Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

What does fire rated sealant cost?

The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.

Can you work in occupied buildings?

Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we’ll plan the work to suit.

Is there a guarantee?

Yes, for a year. If anything isn’t right with the work within the year, let us know and we will sort it.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Do you provide details of the products used?

Yes. Every gap we seal is listed with the product used.

Can you match the sealant colour?

Most of the time, yes. We’ll explain which colours are available and agree one before any work starts.

Do you need fire rated sealant in Whitekirk?

Gaps also open up as buildings move: a seal that cracks or pulls away leaves a path for smoke. Damage from cleaning, knocks and maintenance adds to it.

Common reasons people contact us are:

  • Fire seals that have cracked with movement
  • Open gaps behind door architraves
  • Gaps around pipes and cables through fire-resisting walls
  • Open joints along the top of partitions

For buildings such as Parish Church, gaps around pipes and cables are worth checking after any building work there.

What to look for in a quote

  • How the colour is chosen
  • What product goes in the joint
  • The length of the guarantee
  • How the surfaces are prepared before sealing

10 questions to ask before you book

DIY sealant or a professional job?

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

What fire rated sealant looks like in Whitekirk

If you run a hotel, guest house or holiday let in a coastal place like Whitekirk, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.

Rented homes near East Linton station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.

Whitekirk is about 7 miles north-east of Haddington, in East Lothian. Across the EH42 area, we cover fire rated sealant for homes and businesses. Our area takes in 48 places across East Lothian, large and small. Edinburgh is on our list too, around 22 miles away.

Every address in EH42 is covered for fire rated sealant, from the main roads to the quietest streets. Whether your property is on Binning Wood Road and West Road or a nearby road, we can help. Other places close to Whitekirk include Smeaton (2 miles south), Preston (2 miles south), Phantassie (2 miles south), East Linton (3 miles south) and North Berwick (4 miles north-west). Further out, we also cover Haddington (7 miles south-west), Dunbar (5 miles east), Tranent (13 miles south-west), Prestonpans (14 miles west), Cockenzie and Port Seton (12 miles west) and Wallyford (15 miles south-west).

Local landmarks in Whitekirk

Whitekirk’s nearest station is East Linton station, roughly 2.6 miles south of the centre. Nearby you’ll also find National Museum of Flight (3.2 miles south-west) and Edington Cottage Hospital (3.5 miles north-west). Green spaces nearby include North Berwick Law.

Map of Whitekirk © OpenStreetMap contributors

What affects the cost of fire rated sealant

The price is agreed before any work begins. It’s based on:

  • The type of sealant required
  • When we can work, for business premises
  • How many rooms, windows or areas are involved
  • Any mould that needs treating

Leaving a failed joint normally makes the job bigger, not smaller. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.

Helping us quote

Before you ask for a quote, have a think about:

  • A few pictures by email, if you can
  • Any access issues, like height or stairs
  • Any previous sealing or DIY work
  • If it’s domestic, commercial or a hotel

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.

How it works

The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job generally takes a few hours for a handful of gaps, and longer for a whole building. For a place like Whitekirk, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. We start with the survey or action list, checking the size and surfaces of every gap.
  2. Old or unsuitable sealant is cut out and the gap cleaned.
  3. Where the tested detail needs backing or fill, we fit it.
  4. The sealant goes in to the depth its detail sets, then it’s tooled off.
  5. Locations and products are noted so you have them on file.

How to prepare

  • Keep pets and children clear of the area while we work
  • Clear the area around the work
  • Tell us about any previous sealing or DIY attempts

Getting a quote

To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.

Ask for a quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job