Essex · England
Totham Hill Fire Rated Sealant
Professional fire rated sealant in and around Totham Hill, with old sealant always removed completely.
- Open joints along the top of partitions
- Cracked or shrunken fire-rated sealant
- Gaps left after a refit or conversion
Fire rated sealant in Totham Hill
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. We’re often asked to deal with open joints along the top of partitions and unsealed gaps where pipes and cables go through a wall, on plasterboard & masonry, flats & HMOs and linear gaps.
For a small place like Totham Hill, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Totham Hill (CM9)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What we can’t put right
Before you book, it’s worth knowing the limits:
- Openings too large for sealant, which need batts, boards or another system
- Fire risk assessments, which need a qualified assessor
- Sign-off of the building, which sits with building control or your assessor
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
What we seal
- Flats & HMOs
- Plasterboard & masonry
- Service penetrations
- Linear gaps
- Pipe & cable gaps
- Door frames
Also near Totham Hill
What else we do in Totham Hill
When to call us in Totham Hill
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it’s easy to leave unsealed when doors are changed.
Look out for these signs:
- Unsealed gaps where pipes and cables go through a wall
- Unsealed gaps around fire door frames
- Joints picked up in a fire-stopping survey
- Seals cut through by electricians, plumbers or data installers
Letting a property close to Witham station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
What your quote should include
- How the surfaces are prepared before sealing
- Is the old sealant removed completely?
- Whether you can choose the colour
- The length of the guarantee
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
How it works
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. In a small place like Totham Hill, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
Getting a quote
Want a quote for fire rated sealant? Please phone 0345 464 0079 or email us and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Advice
Landlords, agents and businesses in Totham Hill
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
If you manage several properties in or around Totham Hill, several properties can be quoted together. Just tell us the addresses and what each one needs.
Fire rated sealant in Totham Hill: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Schools such as Great Totham Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment. Community buildings like Church of St Peter are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Totham Hill is about 4 miles south-east of Witham, in Essex. Wherever you are in the CM9 postcode area, we cover fire rated sealant for homes and businesses. 644 places in Essex are on our list, from the larger towns to small villages. There’s also a page for Chelmsford, about 10 miles away.
We work across the CM9 postcode area for fire rated sealant and the streets around it. If you’re just outside Totham Hill, we cover Little Totham (1 mile east), Tolleshunt Major (2 miles east), Goldhanger (3 miles south-east), Oxley Green (3 miles east) and Tolleshunt Knights (3 miles north-east). Larger places within reach include Colchester (11 miles north-east), Chelmsford (10 miles west), Braintree (10 miles north-west), Maldon (4 miles south), Rayleigh (14 miles south) and Witham (4 miles north-west).
What’s near Totham Hill
In Totham Hill, that means homes and buildings near The Bull Public House and the streets around them. The closest station to Totham Hill is Witham station, about 3.5 miles north-west. Well-known places in the area include Maldon & District Agricultural & Domestic Museum (3 miles south-east). Open spaces near Totham Hill include Shut Heath Wood.
How the job changes by surface
Masonry and concrete
Holes through concrete and block are rarely neat. We check the gap size around the service to make sure it suits the product.
Door frames
Frame gaps are usually hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size.
Common questions in Totham Hill
I let a flat near Witham station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover smaller places like Totham Hill?
Yes. Totham Hill is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
Can you work in occupied buildings?
Yes. Occupied flats, HMOs, offices and schools are all fine and we plan access around the people using them. Out-of-hours work can be arranged if that suits the building.
How long does the job take?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access. We’ll confirm how long when we quote.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Is it OK to seal over old sealant?
No. New silicone won’t bond to old silicone, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Do you carry out fire risk assessments?
No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we will quote for the sealant work on it.
What affects the cost of fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The number and length of the joints
- The product the joint needs
- Whether old sealant or filler has to be cut out
- Whether there’s mould to deal with
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- A few photos by email, if you can
- The type of property
- Any previous sealing or DIY work
- The problem you’ve noticed
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, phone 0345 464 0079 or drop us an email.