Essex · England

Fire Rated Sealant in Oxley Green

Intumescent and fire-rated sealant around gaps, frames and service penetrations for Oxley Green, backed by a one-year guarantee. Call for a quick quote.

  • Ordinary sealant used where a fire-rated product was needed
  • Damaged fire sealant left by other trades
  • New service routes left unsealed after building work

Fire rated sealant for Oxley Green homes and businesses

Aftercare tips

Aftercare is simple, and it makes a real difference:

  • Never patch a fire seal with standard sealant
  • Keep the record of products and locations with your fire safety documents
  • Make resealing part of every contractor’s brief
  • Don’t paint over fire sealant until it has cured

Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.

When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.

About our fire rated sealant in Oxley Green

Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. We cut out the wrong material and the gap is resealed with a product tested for that use. If you have standard silicone or caulk in a fire-stopping gap and holes left by a change of layout, we can put it right.

Somewhere as small as Oxley Green, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.

A 12-month guarantee comes as standard, so you are covered after we’ve gone.

Location
Oxley Green (CM9)
Wider area
Essex
Guarantee
A year, on every job
Price
Quoted before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

Landlords, agents and businesses in Oxley Green

Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.

Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.

How the job changes by surface

Flats and HMOs

Flats and HMOs rely on fire separation between homes and the common parts. We seal the gaps your assessor has identified, flat by flat if needed.

Linear gaps

Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both.

Can I do it myself?

If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

Workplaces and buildings in Oxley Green

In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

If you look after a building such as Thurstable School, fire-stopping around service openings should be restored whenever new services go in. If you look after a church, hall or community building such as Church of All Saints, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Kelvedon station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.

Oxley Green is about 6 miles east of Witham, in Essex. Oxley Green gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 644 towns and villages across Essex, from the larger towns to small villages. Chelmsford is on our list too, about 13 miles from Oxley Green.

Here we cover the CM9 postcode area for fire rated sealant. We also cover the places around Oxley Green: Tolleshunt Knights (1 mile north), Tolleshunt D'Arcy (2 miles south-east), Little Totham (2 miles south-west), Tolleshunt Major (2 miles south-west) and Totham Hill (3 miles west). We also work in nearby towns such as Colchester (9 miles north-east), Chelmsford (13 miles west), Braintree (11 miles north-west), Maldon (6 miles south-west), Witham (6 miles west) and Rochford (15 miles south).

Local landmarks in Oxley Green

Around Oxley Green, our work takes us to homes and buildings near Tiptree Parish Field and the streets around them. For rail, the closest station is Kelvedon station, about 4.4 miles north-west of the centre. Well-known places in the area include Anchor Press Museum (1.5 miles north-west) and Birch Castle (4 miles north-east). For a walk, there’s Oxley Meadow.

Map of Oxley Green © OpenStreetMap contributors

What affects the cost of fire rated sealant

Some jobs are bigger than they look, and some smaller. What affects the quote:

  • Access and height
  • The number of rooms or windows
  • The type of sealant required
  • The amount of work

What you pay reflects the work, not guesswork. That is why we ask a few questions first.

What we need to know

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • Photos by email, if that is easy
  • The type of property
  • Access, such as stairs, a lift or height
  • Where the property is

Getting a quote is simple: tell us what needs doing and where. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.

What we do, step by step

On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Oxley Green, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. Access to each area is agreed so the work can run in order.
  2. We take out any damaged or unsuitable sealant.
  3. Gaps are cleaned of dust and loose material.
  4. We apply and tool the sealant to the product’s tested detail.
  5. Locations and products are written up and any gaps unsuitable for sealant are flagged.

Getting ready for the visit

  • Mention any parking rules near the property
  • On commercial sites, let us know about site rules
  • Tell us about any previous sealing or DIY attempts

Ask for a quote

Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, ring 0345 464 0079 or send us an email.

Ask for a quote

Read more

Common questions in Oxley Green

Do you work for landlords with property near Kelvedon station?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or email us with the details for a clear quote.

Is Oxley Green within the area you cover?

Yes, Oxley Green is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Do you provide details of the products used?

Yes. Locations and products are written up when we finish. If you need photos or a set layout, ask when you get a quote.

Is it OK to seal over old sealant?

No, it won’t last. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.

How long does the job take?

Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including preparation and clearing up. Your quote will say how long we expect yours to take.

Do you do fire sealant around door frames?

Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself and we will tell you if we spot problems with the door.

Can ordinary silicone be used in a fire-stopping gap?

No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. If it’s been used, we remove it and use the right product.

Is there any odour?

That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.

What sealant work can’t fix

New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:

  • Assessing a building’s fire safety
  • Construction that does not provide fire resistance on its own
  • Fire doors that need new seals, closers or hardware

If in doubt, phone 0345 464 0079 or email us and we will say what we think.

Joints and surfaces we work on

  • Door frames
  • Plasterboard & masonry
  • Linear gaps
  • Flats & HMOs
  • Pipe & cable gaps
  • Service penetrations
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job