Essex · England
Fire Rated Sealant in Tiptree Heath
Fire rated sealant in Tiptree Heath from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Gaps flagged on a fire risk assessment
- Gaps filled with a product that is not fire-rated
- New service routes left unsealed after building work
How we handle fire rated sealant in Tiptree Heath
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate. We work on pipe & cable gaps, flats & HMOs and door frames, and common reasons people get in touch are unsealed gaps around fire door frames and seals cut through by electricians, plumbers or data installers.
In a village or hamlet like Tiptree Heath, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Where
- Tiptree Heath (CO5)
- Wider area
- Essex
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Towns and villages near Tiptree Heath
What else we do in Tiptree Heath
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Do not fill fire-stopping gaps with ordinary foam or silicone
- Allow for resealing whenever new services are run
- Photograph sealed gaps before they’re covered up
- Keep the record of products and locations with your fire safety documents
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.
When it isn’t the sealant
It helps to know what we cannot do too:
- Fire risk assessments, which need a qualified assessor
- Big openings where sealant alone isn’t the tested solution
- Construction that does not provide fire resistance on its own
If you are not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer.
What we seal
- Linear gaps
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
- Door frames
- Pipe & cable gaps
How it works
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Tiptree Heath, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
How to prepare
- Tell us if parking is tricky
- Plan for the work area to be out of bounds to pets and children
- Mention any sign-in or site rules at work premises
Ask for a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or email us.
Advice
Fire rated sealant around Tiptree Heath
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of St Luke are part of the picture too: gaps around pipes and cables are worth checking after any building work there. For site and facilities teams at buildings such as Tiptree Heath Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Tiptree Heath is about 4 miles east of Witham, in Essex. Anywhere in CO5, we cover fire rated sealant for homes and businesses. Our Essex coverage runs to 644 places, and Tiptree Heath is one of them. For nearby work, see our Chelmsford page (11 miles or so).
Here we cover the CO5 postcode area for fire rated sealant. If you need fire rated sealant at a property on Simpsons Lane, Maldon Road and West End Road or a nearby road, our applicators can take on the job. If you are just outside Tiptree Heath, we cover Windmill Hill (1 mile north), Tiptree (1 mile north-east), Messing (3 miles north), Kelvedon (3 miles north-west) and Feering (3 miles north). Larger places within reach include Colchester (9 miles north-east), Chelmsford (11 miles south-west), Braintree (9 miles north-west), Maldon (6 miles south), Witham (4 miles west) and Rochford (15 miles south).
Around Tiptree Heath
In Tiptree Heath, that means homes and buildings near Thurstable School, Tiptree Parish Field and The Ship pub. The closest station to Tiptree Heath is Kelvedon station, about 2.9 miles north-west of the centre. A little further out are Birch Castle (4.8 miles north-east) and Anchor Press Museum (1.3 miles north-east). The countryside around Tiptree Heath includes Tiptree Heath Nature Reserve.
Tiptree Heath: your questions answered
Is Tiptree Heath within the area you cover?
Yes. Tiptree Heath is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Kelvedon station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or email us.
What does fire rated sealant cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
Do you take on fire stopping in schools and offices?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use. Early starts or out-of-hours work can be arranged if that suits the building.
Can you tell me which gaps need fire stopping?
No. We work from the specification you give us and install to the manufacturer’s details.
Landlord and commercial work in Tiptree Heath
We also work for property managers and facilities teams in Tiptree Heath and across Essex. Several sites can go on one quote, and we’re fully insured.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
When to call us in Tiptree Heath
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. Rushed fire stopping is common.
The problems people normally mention when they call include:
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps around fire door frames
- Holes left by a change of layout
- Open joints along the top of partitions
For landlords with property near Kelvedon station, any gap left by new services in shared walls should be closed with a fire-rated product.
What to look for in a quote
- What product goes in the joint
- Whether VAT is included
- Which colour the sealant will be
- What preparation is included
Surface by surface
Service penetrations
Service penetrations are where new gaps often appear. We clean out what’s there and reseal to the right depth over any backing the detail calls for.
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Where a hole is bigger than the sealant’s tested range, it needs another approach.