Essex · England
Fire-rated sealant in Messing, Essex
Fire rated sealant in Messing from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
- Gaps around pipes and cables through fire-resisting walls
Keeping the joints in good condition
After the cure time, these simple habits help:
- Store the list of sealed gaps with your building paperwork
- Plan fire stopping into any work that goes through walls or floors
- Make resealing part of every contractor’s brief
- Take photos of fire stopping before ceilings or boxing go back
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the list grows.
About our fire rated sealant in Messing
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We work on service penetrations, pipe & cable gaps and flats & HMOs, and the jobs we see most are gaps filled with a product that isn’t fire-rated and joints picked up in a fire-stopping survey.
Somewhere as small as Messing, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Messing (CO5)
- Wider area
- Essex
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What sealant work can’t fix
We won’t take on work that will not last, so these are the limits:
- Certifying a building or signing off its fire safety
- Walls or floors that weren’t built to resist fire
- Large holes that need a different fire-stopping system
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.
Where we work in Messing
- Pipe & cable gaps
- Linear gaps
- Door frames
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Messing: your questions answered
Do you cover Messing for fire rated sealant?
Yes. We work across London and the South East, and Messing is part of that. You can phone 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear quote.
I let a flat near Kelvedon station. Can you help?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
How long does fire rated sealant take?
That depends on how much there is to do, but as a guide it takes a few hours for a handful of gaps, and longer for a whole building. We will tell you when we quote.
Do you provide details of the products used?
Yes. Every gap we seal is listed with the product used so it’s there for the next inspection.
Are you insured?
Yes. We are fully insured.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all.
How do I get a quote for fire rated sealant in Messing?
Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or drop us an email and let us know what needs doing and where.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Places near Messing
Also in Messing
What we are called out for in Messing
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it is not installed as tested. Rushed fire stopping is common particularly when it was the last job before handover.
People usually contact us after spotting one of these:
- Unsealed gaps where pipes and cables go through a wall
- Linear gaps at the head of walls
- Cracked or shrunken fire-rated sealant
- Unsealed gaps around fire door frames
If you let a flat or house near Kelvedon station, any gap left by new services in shared walls should be closed with a fire-rated product.
Before you book anyone
- Whether VAT is included
- Whether they’re fully insured
- Whether the sealant suits the joint
- Is the old sealant removed completely?
Fire rated sealant in Messing: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Schools such as Messing Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices. For buildings such as Church of All Saints (messing), older buildings that have had new heating or wiring often have service gaps worth checking.
Messing is about 5 miles north-east of Witham, in Essex. Wherever you are in the CO5 postcode area, we cover fire rated sealant for homes and businesses. 644 places in Essex are on our list, large and small. There’s also a page for Chelmsford, about 13 miles away.
All of CO5 is within our area for fire rated sealant. If you need fire rated sealant at a property on Kelvedon Road, School Road and Lodge Road or anywhere close by, our applicators can take on the job. Neighbouring places we cover for fire rated sealant include Tiptree (2 miles south), Feering (2 miles west), Windmill Hill (2 miles south-west), Stocks Green (2 miles north-west) and Easthorpe (2 miles north-east). We also work in nearby towns such as Colchester (7 miles north-east), Chelmsford (13 miles south-west), Braintree (9 miles west), Maldon (8 miles south), Witham (5 miles south-west) and Camulodunum (6 miles north-east).
What’s near Messing
Around Messing, our work takes us to homes and buildings near Thurstable School Sports College and Sixth Form Centre, Maypole Public House and Tiptree Parish Field. Messing’s nearest station is Kelvedon station, roughly 2.1 miles west. A little further out are Anchor Press Museum (1.7 miles south) and Birch Castle (3 miles east). Not far away are Oxley Meadow.
Why it’s worth doing now in Messing
Paying for fire stopping that has to be redone is a false economy. If the details weren’t followed, the seal may need redoing once someone inspects it. Around Messing, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why book with us
- Approved under the ARBOMaster scheme
- 4.9 on Google from 180+ five-star reviews
- We are fully insured
- Anti-fungal silicone where joints get wet
Read our cost guide and customer reviews.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes anything from a few hours to several days, depending on how many gaps there are from start to finish. For a village or hamlet like Messing, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Clear items away from the joints we’re working on
- On commercial sites, let us know about site rules
How to get a quote
Need a quote? Please ring 0345 464 0079 or send us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Work for landlords, hotels and businesses
We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.