Hampshire · England
Fire-rated sealant in Tiptoe, Hampshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Tiptoe, backed by a one-year guarantee. Ask us for a quote.
- Ordinary sealant used where a fire-rated product was needed
- Open gaps behind door architraves
- New service routes left unsealed after building work
Fire rated sealant for homes and businesses in Tiptoe
We often work from an action list drawn up by a fire risk assessor. If you share the list, we can quote for the gaps that need fire-rated sealant. We work on door frames, service penetrations and linear gaps, and people most often call us about linear gaps at the head of walls and sealant items on a fire risk assessment action list.
In a village or hamlet like Tiptoe, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Our work is backed for twelve months.
- Location
- Tiptoe (SO41)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Why deal with it now?
Doing it once, properly, beats doing it twice. Work that does not follow the tested detail may have to come out again once someone inspects it. Where a wall is exposed, as many are in small places like Tiptoe, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Why choose Mr Mastic in Tiptoe
- Approved under the ARBOMaster scheme
- We leave the area clean and tidy
- We never seal over old sealant
- Anti-fungal sanitary silicone in wet areas
Take a look at our cost guide and what customers say.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Ask which product was used before you paint
- Flag any open gap you spot round a pipe or cable
- Include fire stopping when you schedule refits
- File the fire-stopping record where your assessor can find it
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint, so ask us which we used.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.
What happens on the day
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes anything from a few hours to several days, depending on how many gaps there are. In a small place like Tiptoe, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
Getting ready for the visit
- Clear the area around the work
- For business premises, tell us about site rules or sign-in
- Mention any parking rules near the property
Getting a quote
For a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Related advice
Landlord and commercial work in Tiptoe
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
How the job changes by surface
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in.
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point against the product’s tested range.
Workplaces and buildings in Tiptoe
If you run a hotel, guest house or holiday let in a coastal place like Tiptoe, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
If you look after a building such as Tiptoe Primary School, service openings in fire-resisting walls need checking after any refurbishment. Letting a property close to Sway station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as St Andrew, service openings in its walls need the right fire-rated sealant, as in any building.
Tiptoe is about 4 miles north-west of Lymington, in Hampshire. Homes, rented property, offices and hotels in Tiptoe can book us for fire rated sealant, old or new, large or small. Every job comes with our 12-month guarantee. Tiptoe is one of 683 places in Hampshire where we work. Southampton is on our list too, around 14 miles away.
We cover every part of the SO41 postcode area for fire rated sealant and the streets around it. We cover properties on Middle Road, Crabbswood Lane and Wootton Road. Other places close to Tiptoe include Mead End (1 mile north), Sway (1 mile north-east), Bashley (1 mile west), Ashley (1 mile south-west) and Hordle (2 miles south). Larger places within reach include Totton (11 miles north-east), Lymington (4 miles south-east), Hythe (12 miles north-east), Ringwood (8 miles north-west), Barton on Sea (3 miles south-west) and Dibden Purlieu (11 miles north-east).
What’s near Tiptoe
In Tiptoe, that means homes and buildings near The Plough Public House and The Arnewood School and the streets around them. The closest station to Tiptoe is Sway station, about 1 mile north-east. Other landmarks nearby include Sammy Miller Motorcycle Museum (2.1 miles south-west) and Highcliffe Castle (4.6 miles south-west). For a walk, there’s Milford on Sea LNR.
What affects the cost of fire rated sealant
Call for a quick quote. The main things that affect it are:
- The old material and how stubborn it is
- The number of rooms or windows
- Any working-time requirements on site
- Access and height
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- Any previous sealing or DIY work
- Photos by email, if that’s easy
- Where the property is
- How we’d reach the joints
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or send us an email.
What sealant work can’t fix
It helps to know what we can’t do too:
- Large holes that need a different fire-stopping system
- Sign-off of the building, which sits with building control or your assessor
- Fire doors that need new seals, closers or hardware
If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Door frames
- Pipe & cable gaps
- Linear gaps
- Service penetrations
- Flats & HMOs
- Plasterboard & masonry
Also in Tiptoe
Tiptoe: your questions answered
Can you help a landlord with a rental near Sway station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear price.
Is Tiptoe within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Will there be a smell?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent ones swell in heat, and they’re one option among several. We use whichever the specification and tested details call for.
Do you guarantee your work?
Yes, for a year. If there’s a problem with our work in that time, tell us and we will put it right.
How much does fire rated sealant cost in Tiptoe?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do you certify the fire stopping?
We don’t give ratings or certificates for our work. Your specification sets the requirement, and we fit a product whose tested details meet it, recording the locations and products.