Essex · England
Fire-rated sealant in Tendring, Essex
Fire-stopping gaps in Tendring need attention? We remove the old material, prepare the joints and seal them properly.
- Open holes round services passing through fire walls
- Linear gaps at the head of walls
- Holes left by a change of layout
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
How we handle fire rated sealant in Tendring
Deciding which gaps need fire stopping is not our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. Typical jobs include gaps where walls meet ceilings or slabs and unsealed gaps where pipes and cables go through a wall, across plasterboard & masonry, flats & HMOs and service penetrations.
For a small place like Tendring, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
Big or small, you get the same 12-month guarantee in Tendring and across Essex.
- Where
- Tendring (CO16)
- Region
- Essex
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Tendring
Also in Tendring
Quotes for fire rated sealant in Tendring
There’s no set price list, because no two jobs are the same. The quote depends on:
- The number of rooms or windows
- The number and length of the joints
- When we can work, for business premises
- The product the joint needs
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will go through it with you.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- What’s wrong with the joints now
- Photos by email, if that is easy
- Where the job is, and your postcode
- Whether it’s a home or a business
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Tendring: your questions answered
Can you help a landlord with a rental near Weeley station?
Yes, we work for letting agents and landlords. Just call 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
Is Tendring in your area for fire rated sealant?
Yes, Tendring is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or email us and tell us what needs doing.
Can ordinary silicone be used in a fire-stopping gap?
No. Standard sealants are not made or tested to stop fire. We cut it out and reseal with a fire-rated product.
Do you take on fire stopping in schools and offices?
Yes. Occupied flats, HMOs, offices and schools are all fine and we plan access around the people using them. Out-of-hours work can be arranged if that suits the building.
Do you carry out fire risk assessments?
No. That’s for a fire risk assessor, designer or building control. We apply fire-rated sealant to the requirements they set.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected.
Do you have insurance?
Yes. Mr Mastic is fully insured, and we’ve been doing sealant work for more than 20 years.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
What we can’t put right
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- A wall that isn’t a fire-resisting element to begin with
- Certifying a building or signing off its fire safety
- Openings too large for sealant, which need batts, boards or another system
If you’re not sure, just call 0345 464 0079 or email us and we will give you a straight answer before booking.
Joints and surfaces we work on
- Linear gaps
- Flats & HMOs
- Service penetrations
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
Commercial buildings in Tendring
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Weeley station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. For buildings such as Church of St Edmund, service openings in its walls need the right fire-rated sealant, as in any building.
Tendring is about 5 miles north of Clacton-on-Sea, in Essex. For fire rated sealant in and around Tendring, please phone 0345 464 0079 or email us for a quick quote. We cover Essex from our Crawley base, Tendring included. Across Essex, we cover 644 places, Tendring among them. You can also see our page for Chelmsford, roughly 28 miles from Tendring.
Every address in CO16 is covered for fire rated sealant, from the main roads to the quietest streets. Other places close to Tendring include Weeley (1 mile south), Tendring Green (1 mile north), Far Thorpe Green (1 mile south-east), Tendring Heath (2 miles north) and Thorpe Green (2 miles east). We also work in nearby towns such as Colchester (9 miles west), Clacton-on-Sea (5 miles south), Harwich (8 miles north-east), Camulodunum (10 miles west), Greenstead (8 miles west) and Wivenhoe (7 miles west).
What’s near Tendring
Typical jobs here are in homes near The Bicycle pub. The closest station to Tendring is Weeley station, roughly 1.5 miles south. Green spaces nearby include Weeleyhall Wood.
The process
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take anything from a few hours to several days, depending on how many gaps there are. Somewhere like Tendring needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Tell us about access, such as stairs, a lift or high-level joints
- Try not to wet indoor joints just before the visit
Ask for a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To get started, call 0345 464 0079 or send us an email.
Advice
Why it’s worth doing now in Tendring
Doing it once, properly, beats doing it twice. Work that doesn’t follow the tested detail may have to come out again once someone inspects it. In a small place like Tendring, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or drop us an email and we’ll talk you through it.
Why us?
- We are fully insured
- One-year guarantee on every job
- More than 20 years in sealant work
- Any old sealant cut out fully, not covered over
See our cost guide or what customers say.
Signs you need fire rated sealant in Tendring
Much fire stopping is hidden: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
The most common problems we see are:
- Sealant items on a fire risk assessment action list
- Open gaps behind door architraves
- Fire stopping disturbed by later work
- Gaps where walls meet ceilings or slabs
Schools such as Tendring Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Before you book anyone
- What happens if they find a problem under the old sealant
- Are they insured?
- Is the old sealant removed completely?
- The length of the guarantee
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Get damaged fire seals looked at promptly
- Do not fill fire-stopping gaps with ordinary foam or silicone
- Do not paint over fire sealant until it has cured
- Keep photos of seals that will be hidden
Any fire seal that is cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.