Essex · England
Tarpots Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Tarpots, backed by a one-year guarantee. Ask us for a quote.
- Unsealed gaps where pipes and cables go through a wall
- Gaps left after a refit or conversion
- Damaged fire sealant left by other trades
Keeping the joints in good condition
How long the joints last depends on use and care. We suggest:
- Report cracked or damaged seals as soon as you notice them
- Check risers, ceiling voids and cupboards during building checks
- Never patch a fire seal with standard sealant
- Take photos of fire stopping before ceilings or boxing go back
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
Fire rated sealant in Tarpots, done properly
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment on buildings across Tarpots. If you share the list, we can quote for the gaps that need fire-rated sealant. If you have linear gaps at the head of walls and standard silicone or caulk in a fire-stopping gap, we can help, whatever the surface.
In a village or hamlet like Tarpots, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Where
- Tarpots (SS7)
- Region
- Essex
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What the job involves on each surface
Flats and HMOs
Conversions generally leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product and the locations noted.
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
What we do, step by step
Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it usually takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Tarpots, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Before we arrive
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, phone 0345 464 0079 or email us.
Related advice
Fire rated sealant around Tarpots
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like St George are part of the picture too: gaps around pipes and cables are worth checking after any building work there. For landlords with property near Benfleet station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Tarpots is about 1 mile west of Thundersley, in Essex. Every kind of property in Tarpots is covered for fire rated sealant, old or new, large or small. The work is guaranteed for a year. We cover 644 towns and villages across Essex, large and small. For nearby work, see our Chelmsford page (12 miles or so).
Work in SS7 works the same way as everywhere else we cover. Streets in the area include London Road, Hatley Gardens and High Road, all of which we cover. If you are just outside Tarpots, we cover South Benfleet (1 mile south-east), North Benfleet (1 mile north-west), Thundersley (1 mile east), Bowers Gifford (1 mile west) and Pitsea (2 miles west). Further out, we also cover Chelmsford (12 miles north), Basildon (4 miles west), Brentwood (11 miles west), Maldon (13 miles north-east), Canvey Island (3 miles south-east) and Billericay (7 miles north-west).
Local landmarks in Tarpots
Around Tarpots, our work takes us to homes and buildings near Jotmans Hall Primary School. Tarpots’s nearest station is Benfleet station, about 1.6 miles south of the centre. Other landmarks nearby include The Motor Boat Museum (3 miles west) and Chartwell Private Hospital (3.8 miles east). Green spaces nearby include Bowers Marsh RSPB Reserve.
Common questions in Tarpots
Do you cover smaller places like Tarpots?
Yes, Tarpots is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
I let a flat near Benfleet station. Can you help?
Yes. We work for landlords and letting agents as well as householders. Just phone 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.
Can I use normal mastic around a pipe through a fire wall?
No. A gap that needs fire stopping needs a tested fire-rated product.
Can new sealant go over the old?
No. New silicone won’t bond to old silicone, and it traps any mould or water underneath. We remove it all first.
Will there be a smell?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Can you work in occupied buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use and we plan access around the people using them. Early starts or out-of-hours work can be arranged where it’s needed.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Do you need fire rated sealant in Tarpots?
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
Any of these means the joints need attention:
- Fire stopping disturbed by later work
- New service routes left unsealed after building work
- Door frames with gaps between frame and wall
- Linear gaps at the head of walls
Managing a site like The Appleton School? Then fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- What the quote includes, VAT included or not
- Whether all the old sealant comes out first
- Who does the work, and how experienced they are
- Whether you can choose the colour
Honest limits
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- Fire risk assessments, which need a qualified assessor
- A wall that is not a fire-resisting element to begin with
- Sign-off of the building, which sits with building control or your assessor
If you’re not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer.
What we seal
- Flats & HMOs
- Door frames
- Service penetrations
- Linear gaps
- Pipe & cable gaps
- Plasterboard & masonry
What affects the cost of fire rated sealant
We do not publish a price list, because no two jobs are the same. What we look at:
- The number of rooms or windows
- Working hours on commercial sites
- Whether there’s mould to deal with
- The size of the job
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
When you call or email, it’s useful to know:
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or drop us an email.