Essex · England
Fire-rated sealant in Bowers Gifford, Essex
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Bowers Gifford. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Open holes round services passing through fire walls
- Unsealed gaps around fire door frames
- Linear gaps at the head of walls
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Ask which product was used before you paint
- Take photos of fire stopping before ceilings or boxing go back
- Allow for resealing whenever new services are run
- Report cracked or damaged seals as soon as you notice them
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the list grows.
How we handle fire rated sealant in Bowers Gifford
Door frame gaps, linear joints and holes around services all have their own details. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. If you’re dealing with old fire sealant that has split or come away and fire stopping disturbed by later work, we can help.
Somewhere as small as Bowers Gifford, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Bowers Gifford (SS13)
- Region
- Essex
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Towns and villages near Bowers Gifford
What else we do in Bowers Gifford
When it isn’t the sealant
To be straight with you, there are a few things sealant will not fix:
- Deciding what fire stopping a building needs
- Doors that aren’t fire doors in the first place
- Construction that doesn’t provide fire resistance on its own
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly.
Joints and surfaces we work on
- Flats & HMOs
- Plasterboard & masonry
- Door frames
- Service penetrations
- Linear gaps
- Pipe & cable gaps
What happens on the day
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before any work starts. The work usually takes anything from a few hours to several days, depending on how many gaps there are. In a small place like Bowers Gifford, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your records.
Before we arrive
- On commercial sites, let us know about site rules
- For indoor joints, keep the area dry beforehand if you can
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
To get a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Related advice
Common problems we fix in Bowers Gifford
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it isn’t a fire-rated seal.
If you can see any of these, it’s time to have the joints looked at:
- Unsealed gaps where pipes and cables go through a wall
- Fire seals that have cracked with movement
- Standard silicone or caulk in a fire-stopping gap
- Joints picked up in a fire-stopping survey
If you look after a church, hall or community building such as Saint Gabriel's Church, gaps around pipes and cables are worth checking after any building work there.
Before you book anyone
- What insurance they hold
- What product goes in the joint
- How long the guarantee is
- Whether VAT is included
FAQs for Bowers Gifford
Will you come out to Bowers Gifford?
Yes, Bowers Gifford is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is Bowers Gifford in your area for fire rated sealant?
Yes, Bowers Gifford is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Will we have a record of what was sealed?
Yes. When the job is done, we give you the locations and products. If you need pictures or a set layout, ask when you get a quote.
What’s the difference between intumescent and fire-rated sealant?
Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant, and the choice depends on the gap.
Are you insured?
Yes. We’re fully insured.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often happy for the work to be arranged.
Can you seal over the old sealant?
No, it won’t last. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Quotes for fire rated sealant in Bowers Gifford
There’s no set price list, because no two jobs are the same. What we look at:
- Any working-time requirements on site
- Whether the work is at height
- Which sealant suits the joint
- The old material and how stubborn it is
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.
What to tell us for a quote
When you contact us, it’s useful to know:
- The address or postcode of the job
- How we’d reach the joints
- What’s wrong with the joints now
- The type of property
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Commercial buildings in Bowers Gifford
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Pitsea station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For site and facilities teams at buildings such as St Margaret's Church of England Academy, gaps opened by contractors for new cabling are a common finding in schools and offices.
Bowers Gifford is about 3 miles west of Thundersley, in Essex. From the centre of Bowers Gifford to the outskirts, fire rated sealant is available for homes and businesses alike. 644 places in Essex are on our list. For nearby work, see our Chelmsford page (12 miles or so).
Postcode districts we cover here for fire rated sealant: SS13. Local streets include London Road, Bowers Close and Eversley Road, and we cover them all. Nearby, we also carry out fire rated sealant in Pitsea (1 mile west), North Benfleet (1 mile north-east), Tarpots (1 mile east), Nevendon (2 miles north) and South Benfleet (2 miles east). Within a short drive, we also cover Chelmsford (12 miles north), Basildon (3 miles west), Brentwood (10 miles north-west), Maldon (13 miles north-east), Canvey Island (4 miles south-east) and Billericay (6 miles north-west).
Around Bowers Gifford
Locally, jobs take us to homes and businesses close to Chalvedon School, The Basildon Upper Academy and Vange Hill. For rail, the closest station is Pitsea station, about 0.7 miles south-west. A little further out are The Motor Boat Museum (1.6 miles west) and Eastgate Shopping Centre (2.6 miles west). For a walk, there’s Bowers Marsh RSPB Reserve.
DIY sealant or a professional job?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Surface by surface
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.
Door frames
We deal with the gap around the frame, not the door. The door leaf, its seals and closer need a door specialist.