Hampshire · England
Fire-rated sealant in Stoke, Hampshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Stoke, with a one-year guarantee on every job. Call for a quick quote.
- Cracked or shrunken fire-rated sealant
- Fire stopping disturbed by later work
- Ordinary sealant used where a fire-rated product was needed
Fire rated sealant in Stoke
Bigger jobs can be worked through in stages, flat by flat or floor by floor. It gives you a list to keep with the building’s fire safety documents. Common call-outs are for holes left by a change of layout and fire stopping disturbed by later work, on linear gaps, door frames and pipe & cable gaps.
For a small place like Stoke, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
Each job carries a 12-month guarantee.
- Location
- Stoke (PO11)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Never patch a fire seal with standard sealant
- Report cracked or damaged seals as soon as you notice them
- Keep pictures of seals that will be hidden
- Check whether a sealant can be painted before decorating over it
Do not drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is usually a straightforward job.
FAQs for Stoke
Do you cover smaller places like Stoke?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Warblington station?
Yes, we work for letting agents and landlords. Just call 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Intumescent sealants are a type of fire-rated sealant, and the choice depends on the gap.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and you will get one quote.
Do I have to be there?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
What sealant work can’t fix
New sealant can’t fix everything, and we will tell you before we start. Sealant will not put right:
- Construction that doesn’t provide fire resistance on its own
- Doors that aren’t fire doors in the first place
- Openings too large for sealant, which need batts, boards or another system
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Surfaces we seal
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
- Linear gaps
- Pipe & cable gaps
- Door frames
Different surfaces, different methods
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service to make sure it suits the product.
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Loose material is removed so the sealant has a firm edge.
Signs you need fire rated sealant in Stoke
Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. Rushed fire stopping is common.
These are the problems we’re asked about most:
- Unsealed gaps around fire door frames
- Gaps left after a refit or conversion
- Gaps flagged on a fire risk assessment
- Gaps filled with a product that is not fire-rated
For site and facilities teams at buildings such as The Hayling College, fire-stopping around service openings should be restored whenever new services go in.
Before booking anyone
- Is the old sealant removed completely?
- What guarantee comes with the work
- What insurance they hold
- How the surfaces are prepared before sealing
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Nearby places to Stoke
More services for Stoke
What fire rated sealant looks like in Stoke
If you run a hotel, guest house or holiday let in a coastal place like Stoke, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Church of St Peter, gaps around pipes and cables are worth checking after any building work there. If you let a flat or house near Warblington station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Stoke is about 3 miles south of Havant, in Hampshire. Our applicators cover fire rated sealant for householders, landlords and businesses in Stoke and nearby. Stoke is one of 683 places in Hampshire we cover.
All of PO11 is covered for fire rated sealant. Whether your property is on Havant Road, Rogers Mead and Northwood Lane or anywhere close by, our applicators can take on the job. Being close to the A3023, Stoke is simple for us to get to for fire rated sealant. If you are just outside Stoke, we cover North Hayling (1 mile east), Tye (1 mile east), Northney (1 mile north-east), Langstone (1 mile north) and Warblington (1 mile north). Within a short drive, we also cover Gosport (8 miles west), Havant (3 miles north), Fareham (10 miles west), Horndean (6 miles north), Waterlooville (5 miles north-west) and Petersfield (13 miles north).
Near you in Stoke
Locally, jobs take us to homes and businesses close to The Maypole pub and the streets around them. The closest station to Stoke is Warblington station, roughly 2.4 miles north. Nearby you will also find Warblington Castle (1.8 miles north) and Havant Museum (2.1 miles north). For a walk, there’s Hayling Billy.
What we do, step by step
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a few hours for a handful of gaps, and longer for a whole building, depending on the size of the job. In a small place like Stoke, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Getting ready for the visit
- Mention any tricky access
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
Ask for a quote
If you’re in Stoke and need fire rated sealant, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.
Advice
Quotes for fire rated sealant in Stoke
The quote reflects the job in front of us. We take into account:
- How much old sealant there is and how hard it is to remove
- The number and length of the joints
- Which sealant suits the joint
- Access and height
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or email us and we will talk you through it.
What we need to know
When you call or email, it’s useful to know:
- If someone has resealed it before
- Whether it’s a home or a business
- Where the property is
- Any access issues, like height or stairs
We quote each job on its own. Simply call 0345 464 0079 or send us an email and describe the job and send pictures if you have them.