East Sussex · England

Fire Rated Sealant in Staplecross

Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Staplecross and across East Sussex. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Gaps left after a refit or conversion
  • Old fire sealant that has split or come away
  • Gaps where walls meet ceilings or slabs

Fire rated sealant in Staplecross

Fire rated sealant around Staplecross

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.

Managing a site like Staplecross Methodist Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices. Rented homes near Robertsbridge station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. For buildings such as St Marks Staplecross, older buildings that have had new heating or wiring often have service gaps worth checking.

Staplecross is about 7 miles north of Hastings, in East Sussex. Jobs in Staplecross get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Staplecross is one of 289 places in East Sussex where we work. There’s also a page for Brighton, roughly 31 miles from Staplecross.

Our applicators cover all of TN32 for fire rated sealant and the streets around it. Local streets include Sheringham Close, Cricketers Field and Weald View. Nearby, we also carry out fire rated sealant in Cripp's Corner (1 mile south-west), Snagshall (1 mile north), Swaile's Green (1 mile south-west), Mill Corner (2 miles east) and Sedlescombe (3 miles south). We also work in nearby towns such as Hastings (7 miles south), Bexhill-on-Sea (9 miles south), Hailsham (14 miles south-west), St Leonards (8 miles south), Hastings Old Town (8 miles south) and Belmont (8 miles south).

Landmarks near Staplecross

In Staplecross, that means homes and buildings near The Cross Inn, among other places. For rail, the closest station is Robertsbridge station, about 3.1 miles west. For a walk, there’s Flatropers Wood and Senlac Hill.

Map of Staplecross © OpenStreetMap contributors

Fire rated sealant for homes and businesses in Staplecross

A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. Common call-outs are for door frames with gaps between frame and wall and gaps where walls meet ceilings or slabs, across pipe & cable gaps, flats & HMOs and linear gaps.

In a village or hamlet like Staplecross, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.

Your job is guaranteed for a year, as with all our work.

Eleven members of the Mr Mastic team standing in front of branded white vans
Location
Staplecross (TN32)
Region
East Sussex
Guarantee
12 months on all our work
Quote
A clear price before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026

When it isn’t the sealant

New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:

  • Assessing a building’s fire safety
  • Walls or floors that weren’t built to resist fire
  • Sign-off of the building, which sits with building control or your assessor

If you are not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.

What we seal

  • Pipe & cable gaps
  • Plasterboard & masonry
  • Linear gaps
  • Flats & HMOs
  • Door frames
  • Service penetrations

Your questions about fire rated sealant in Staplecross

I let a flat near Robertsbridge station. Can you help?

Yes, we work for landlords and agents. Just call 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.

Is Staplecross in your area for fire rated sealant?

Yes, Staplecross is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.

What should I tell you?

Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or email us.

Can you quote for more than one area?

Yes. Just list everything you need and we’ll quote it together.

Can you seal over the old sealant?

No, it won’t last. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.

How long does the job take?

That depends on the amount of work, but as a guide it takes anything from a few hours to several days, depending on how many gaps there are. We will tell you when we quote.

What fire rating will the seal have?

Ratings and certificates aren’t something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.

Will the old sealant be removed?

Yes, every time. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.

What affects the quote in Staplecross

We quote each job individually. These are the things that affect it:

  • The type of sealant required
  • How much old sealant there is and how hard it is to remove
  • The number and length of the joints
  • Working hours on commercial sites

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.

What to tell us for a quote

When you call or email, it’s useful to know:

  • A few photos by email, if you can
  • Roughly how big the job is
  • Where the job is, and your postcode
  • Whether it has been sealed before

Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand, and we will come back to you with a quote.

What we do, step by step

Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. It usually takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Staplecross, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. First we work through your list or survey, measuring each gap and checking what it’s formed in.
  2. Old or unsuitable sealant is cut out and the gap cleaned.
  3. Backing or fill is fitted where the product’s tested detail calls for it.
  4. Fire-rated or intumescent sealant is applied to the right depth and tooled.
  5. We record the locations and products used for your records.

How to prepare

  • Tell us about any previous sealing or DIY attempts
  • Tell us about any water getting in
  • Tell us about access, such as stairs, a lift or high-level joints

Getting a quote

There’s no standard price list. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or email us.

Get a quick quote

Advice

Surface by surface

Masonry and concrete

Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before the sealant goes in.

Flats and HMOs

Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product and record where they are.

Aftercare tips

No joint lasts for ever, but care makes a real difference. A few tips:

  • Check risers, ceiling voids and cupboards during building checks
  • Make resealing part of every contractor’s brief
  • Get damaged fire seals looked at promptly
  • Never patch a fire seal with standard sealant

File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.

It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole.

Should I try it myself first?

A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.

Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

Work for landlords, hotels and businesses

From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job