West Berkshire · England
Fire-rated sealant in Stanmore, West Berkshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Stanmore, with a 12-month guarantee on every job. Ask us for a quote.
- Gaps around pipes and cables through fire-resisting walls
- Gaps filled with a product that is not fire-rated
- New service routes left unsealed after building work
Fire rated sealant for homes and businesses in Stanmore
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. Common call-outs are for standard silicone or caulk in a fire-stopping gap and unsealed gaps around fire door frames, across door frames, plasterboard & masonry and service penetrations.
For a small place like Stanmore, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Where
- Stanmore (RG20)
- Wider area
- West Berkshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Questions from Stanmore
Is fire rated sealant in Stanmore guaranteed?
All our work, in Stanmore and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Do you cover smaller places like Stanmore?
Yes. Stanmore is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you seal over the old sealant?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in so it’s there for the next inspection.
Is intumescent sealant the same as fire-rated sealant?
Intumescent means it swells when heated, helping close the gap. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
Can you quote for more than one area?
Yes. More than one area can be quoted together.
Are you fully insured?
Yes. We’re fully insured for domestic and commercial work.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- File the fire-stopping record where your assessor can find it
- Get damaged fire seals looked at promptly
- Tell trades working in the building that fire seals must be put back
- Allow for resealing whenever new services are run
Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Sealing them early helps on every front.
Fire rated sealant around Stanmore
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Managing a site like Beedon C.E. (Controlled) Primary School? Then service openings in fire-resisting walls need checking after any refurbishment. Community buildings like Church of St Nicholas are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Stanmore is about 8 miles north of Newbury, in West Berkshire. Every kind of property in Stanmore is covered for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Stanmore is one of 155 towns and villages in West Berkshire where we work. For nearby work, see our Reading page (15 miles or so).
Work in RG20 is quoted and booked the same way as anywhere else. Nearby, we also carry out fire rated sealant in Catmore (2 miles north-west), West Ilsley (2 miles north), Brightwalton (3 miles west), Brightwalton Green (3 miles west) and Farnborough (3 miles north-west). Within a short drive, we also cover Newbury (8 miles south), Thatcham (8 miles south), Burghfield Common (13 miles south-east), Speenhamland (7 miles south), Hungerford (11 miles south-west) and Calcot (12 miles east).
Near you in Stanmore
Nearby you’ll also find Hampstead Norris Castle (3.7 miles south-east). Open spaces near Stanmore include Churn Hill.
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
More services for Stanmore
When something else is needed
A few problems are outside what sealant work can do:
- Openings too large for sealant, which need batts, boards or another system
- Construction that doesn’t provide fire resistance on its own
- Doors that aren’t fire doors in the first place
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.
What we seal
- Linear gaps
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
How the job changes by surface
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Linear gaps
Long, narrow gaps appear where walls meet slabs and ceilings. We seal them to the tested detail, with backing where it’s needed.
How we quote for fire rated sealant
Call for a quick quote. The main things that affect it are:
- Whether the work is at height
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
- The product the joint needs
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, ring 0345 464 0079 or email us for an honest opinion and a quote.
What we need to know
Photos help, but a description is a good start. Please mention:
- Roughly how big the job is
- Any previous sealing or DIY work
- Photos by email, if that is easy
- How we’d reach the joints
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
How it works
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. It generally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Stanmore, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Mention any leaks or damp you’ve noticed
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
Get a quote
We quote each job on its own. Just ring 0345 464 0079 or send us an email with the details, and photos are welcome.
Read more
Why it’s worth doing now in Stanmore
A quick fill with any sealant to hand is not fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, which is why we match the product and the method to each gap. Where a wall is exposed, as many are in small places like Stanmore, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why Stanmore clients choose us
- Domestic, commercial and hotel work
- Over 20 years’ experience
- 180+ five-star Google reviews
- We leave the area clean and tidy
Read what affects the cost or our reviews.