Kent · England
Fire-rated sealant in Speldhurst, Kent
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Speldhurst, backed by a one-year guarantee. Ask us for a quote.
- Gaps around pipes and cables through fire-resisting walls
- Joints picked up in a fire-stopping survey
- Damaged fire sealant left by other trades
About our fire rated sealant in Speldhurst
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. If you’re dealing with cracked or shrunken fire-rated sealant and damaged fire sealant left by other trades, we can put it right, whatever the surface.
Work in a small place like Speldhurst is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Where
- Speldhurst (TN3)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Why act early in Speldhurst
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. A proper seal lets the wall do its job again, and the sealing itself is often a contained piece of work. Around Speldhurst, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or email us.
Why us?
- Anti-fungal sanitary silicone in wet areas
- An ARBOMaster approved applicator
- Homes, businesses and hotels
- More than 20 years in sealant work
Speldhurst questions
I let a flat near Tunbridge Wells station. Can you help?
Yes. We work for letting agents and landlords as well as householders. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover Speldhurst for fire rated sealant?
Yes. Our work covers London and the South East, and Speldhurst is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will send you a clear quote.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first.
Can you work in occupied buildings?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Tell us how the building is used and we will plan around it.
Can I add another job to the visit?
Yes. Just list everything you need and we will quote it together.
How do I get a quote for fire rated sealant in Speldhurst?
Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or drop us an email and let us know what needs doing and where.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Different surfaces, different methods
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. We clean out dust and debris before sealing so the sealant bonds.
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Fire rated sealant in Speldhurst: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Community buildings like Church of St Mary the Virgin are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. For landlords with property near Tunbridge Wells station, any gap left by new services in shared walls should be closed with a fire-rated product.
Speldhurst is about 2 miles north-west of Royal Tunbridge Wells, in Kent. Whether you are in the middle of Speldhurst or further out, fire rated sealant is available for homes and businesses alike. Across Kent, we cover 922 places, and Speldhurst is one of them. For nearby work, see our Crawley page.
All of TN3 is covered for fire rated sealant, from the main roads to the quietest streets. Local streets include Northfields, St Mary's Lane and Penshurst Road, and we cover them all. We also cover Bullingstone (1 mile south-west), Poundsbridge (1 mile west), Stockland Green (1 mile east), Printstile (1 mile north) and Rusthall (1 mile south-east). Larger places within reach include Sevenoaks (9 miles north), Tonbridge (4 miles north-east), Kings Hill (12 miles north-east), Paddock Wood (8 miles east), Edenbridge (8 miles north-west) and Allington (15 miles north-east).
Landmarks near Speldhurst
We work in homes and buildings around Bennett Memorial Diocesan School, The George And Dragon pub and Rose Hill School and the streets around them. Speldhurst’s nearest station is Tunbridge Wells station, roughly 2.5 miles south-east. A little further out are Royal Victoria Place (2.4 miles south-east) and Kent and Sussex Hospital (2.1 miles south-east). For a walk, there’s Barden Lake and Broadwater Warren RSPB Reserve.
For landlords and businesses
We work for landlords and letting agents as well as householders. Resealing between tenancies keeps a property looking cared for.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will quote.
Towns and villages near Speldhurst
What else we do in Speldhurst
Common problems we fix in Speldhurst
Much fire stopping is hidden: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
It’s worth asking for a quote if you see:
- Linear gaps at the head of walls
- Gaps left after a refit or conversion
- Standard silicone or caulk in a fire-stopping gap
- Open gaps behind door architraves
If you look after a building such as Speldhurst Church of England Voluntary Aided Primary School, fire-stopping around service openings should be restored whenever new services go in.
Before booking anyone
- What the quote includes, VAT included or not
- Whether they seal over old material or remove it
- Whether the sealant suits the joint
- Who does the work, and how experienced they are
How it works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on the size of the job. Somewhere as small as Speldhurst, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Mention any parking rules near the property
- Let us know about stairs, lifts or work at height
- Keep children and pets away from the work area
Ask for a quote
If you’re in Speldhurst and need fire rated sealant, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Read more
What affects the quote in Speldhurst
Your quote is based on your job. We look at:
- The number of rooms or windows
- Whether the work is at height
- The product the joint needs
- Whether old sealant or filler has to be cut out
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Access, such as stairs, a lift or height
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
- If someone has resealed it before
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Take photos of fire stopping before ceilings or boxing go back
- Check risers, ceiling voids and cupboards during building checks
- Store the list of sealed gaps with your building paperwork
- Flag any open gap you spot round a pipe or cable
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the list grows.