Kent · England
Fire-rated sealant in Allington, Kent
Specialist fire rated sealant for Allington: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Unsealed gaps where pipes and cables go through a wall
- Ordinary sealant used where a fire-rated product was needed
- Cracked or shrunken fire-rated sealant
Fire rated sealant in Allington, done properly
Ordinary silicone or decorators’ caulk in a fire-stopping gap is not a fire-rated seal. Anything unsuitable comes out first and reseal with a fire-rated product tested for that kind of gap. We’re often asked to deal with old fire sealant that has split or come away and linear gaps at the head of walls, on flats & HMOs, plasterboard & masonry and door frames.
In a smaller place like Allington, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. The work is the same as in a big building, just on a smaller scale.
Big or small, you get the same 12-month guarantee in Allington and across Kent.
- Location
- Allington (ME16, ME20, ME14)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What sealant work cannot fix
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Large holes that need a different fire-stopping system
- Issuing a fire rating or certificate for a building
- Deciding what fire stopping a building needs
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
Joints and surfaces we work on
- Linear gaps
- Service penetrations
- Flats & HMOs
- Door frames
- Pipe & cable gaps
- Plasterboard & masonry
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Landlords, agents and businesses in Allington
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured for the work.
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes anything from a few hours to several days, depending on how many gaps there are, and the area is left clean. A visit to Allington is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
Ask for a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or send us an email.
Related advice
Fire rated sealant around Allington
Allington has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Rented homes near Barming station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For site and facilities teams at buildings such as Allington Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Allington is about 2 miles north-west of Maidstone, in Kent. Allington gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Across Kent, we cover 922 places, Allington among them. London is on our list too, about 29 miles from Allington.
All of ME16, ME20 and ME14 is within our area for fire rated sealant, from the main roads to the quietest streets. That includes homes and businesses on Wyatt Road, Beaver Road and Godwin Road. If you are just outside Allington, we cover Aylesford (1 mile north-west), Fant (1 mile south), Ditton (2 miles west), East Farleigh (2 miles south) and Kettle Corner (2 miles south-west). Further out, we also cover Sittingbourne (11 miles east), Sevenoaks (13 miles west), Royal Tunbridge Wells (14 miles south-west), Gravesend (11 miles north-west), Tonbridge (11 miles south-west) and Northfleet (12 miles north-west).
Landmarks near Allington
In Allington, that means homes and buildings near St. Simon Stock Catholic School, Whatman Park and Malta Inn. Allington’s nearest station is Barming station, roughly 0.8 miles west. A little further out are Queen's Own Royal West Kent Regiment Museum (1.3 miles south-east) and Fremlin Walk (1.3 miles south-east). Open spaces near Allington include Burham Down and Boxley Hills.
Common questions in Allington
Can you help a landlord with a rental near Barming station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Do you work in hotels near Allington?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Do you do fire sealant around door frames?
Yes, where the gap suits a sealant detail. We seal the frame-to-wall gap, not the door itself.
Do you offer different sealant colours?
Yes. Sealants come in white, clear, grey and other colours for many products, and we agree the colour with you before work begins.
What should I tell you?
Tell us what needs doing and where, plus photos if you have them. If we need more, we’ll ask.
Can I use normal mastic around a pipe through a fire wall?
No. A gap that needs fire stopping needs a tested fire-rated product fitted to the maker’s details.
What affects the cost of fire rated sealant
You will get a clear quote before any work starts. It takes into account:
- How many rooms, windows or areas are involved
- The amount of work
- The product the joint needs
- When we can work, for business premises
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Any access issues, like height or stairs
- Roughly how big the job is
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
We quote each job on its own, so the first step is telling us about yours. Simply phone 0345 464 0079 or send us an email and describe the job, and photos are welcome.
Nearby places to Allington
Other services in Allington
Signs you need fire rated sealant in Allington
Lots of unsealed gaps appear long after the building was completed. New cables, pipes and data runs go through walls and ceilings and the hole they leave doesn’t always get resealed.
People normally contact us after spotting one of these:
- Unsealed gaps where pipes and cables go through a wall
- Door frames with gaps between frame and wall
- Standard silicone or caulk in a fire-stopping gap
- Gaps left after a refit or conversion
For buildings such as St. Nicholas' Church, gaps around pipes and cables are worth checking after any building work there.
What your quote should include
- Whether the sealant suits the joint
- What preparation is included
- When the joint can take water or movement
- What insurance they hold
How to look after the new joints
After the cure time, these simple habits help:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Take pictures of fire stopping before ceilings or boxing go back
- Ask which product was used before you paint
- Include hidden areas like risers in routine checks
Include fire stopping in your regular building checks. Watch for cracking, gaps or seals that have been disturbed and get them seen to.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.