Kent · England
Snargate Fire Rated Sealant
Specialist fire rated sealant for Snargate: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Door frames with gaps between frame and wall
- Gaps flagged on a fire risk assessment
- Cracked or shrunken fire-rated sealant
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Don’t paint over fire sealant until it has cured
- Report cracked or damaged seals as soon as you notice them
- Allow for resealing whenever new services are run
Don’t add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is generally a straightforward job.
Fire rated sealant in Snargate
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. Typical jobs include seals cut through by electricians, plumbers or data installers and gaps where walls meet ceilings or slabs, on door frames, flats & HMOs and linear gaps.
In a village or hamlet like Snargate, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Snargate (TN29)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What fire rated sealant looks like in Snargate
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Community buildings like Church of St Dunstan are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Snargate is about 8 miles south of Ashford, in Kent. Homes, rented property, offices and hotels in Snargate is covered for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Our Kent coverage runs to 922 places, and Snargate is one of them. We also work in Brighton, about 44 miles from Snargate.
Every address in TN29 is within our area for fire rated sealant, from the main roads to the quietest streets. That includes homes and businesses on Short Lane and Snargate Lane and the roads around them. Neighbouring places we cover for fire rated sealant include Brenzett (1 mile south-east), Ivychurch (2 miles east), Kenardington (3 miles north-west), Hamstreet (3 miles north) and Ruckinge (4 miles north-east). Larger places within reach include Ashford (8 miles north), Folkestone (15 miles east), Hythe (11 miles east), Hawkinge (15 miles north-east), Tenterden (7 miles north-west) and Cheriton (14 miles east).
What’s near Snargate
Typical jobs here are in homes near Red Lion pub, among other places. The closest station to Snargate is Appledore (Kent) station, roughly 1.1 miles north-west of the centre. Well-known places in the area include Brenzett Aeronautical Museum (1.6 miles south-east) and Romney 'castle' (3.4 miles south-east). The countryside around Snargate includes Orlestone Forest.
What we’re called out for in Snargate
Much fire stopping is hidden: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
Look out for any of the following:
- Fire stopping disturbed by later work
- Cracked or shrunken fire-rated sealant
- Door frames with gaps between frame and wall
- Gaps flagged on a fire risk assessment
Rented homes near Appledore (Kent) station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Comparing quotes
- What happens if they find a problem under the old sealant
- Who turns up on the day
- How long the guarantee is
- Whether the sealant suits the joint
When something else is needed
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Certifying a building or signing off its fire safety
- Assessing a building’s fire safety
- Fire doors that need new seals, closers or hardware
If you are not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Door frames
- Plasterboard & masonry
Snargate: your questions answered
Can you help a landlord with a rental near Appledore (Kent) station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Do you cover Snargate for fire rated sealant?
Yes, Snargate is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear price.
Can you quote for more than one area?
Of course. Doing several areas at once is normally more efficient.
Do you offer different sealant colours?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before we start.
How do I get a quote for fire rated sealant in Snargate?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before work begins.
Do you have insurance?
Yes. Full insurance covers our work.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you do not need to watch us work.
Do the sealants smell?
Some sealants have a smell while they cure. Opening a window helps.
Work for landlords, hotels and businesses
If you manage several properties in or around Snargate, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
What affects the cost of fire rated sealant
The price is agreed before any work begins. It’s based on:
- The size of the job
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
- Any working-time requirements on site
The cost depends on how much there is to do, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
What we need to know
When you call or email, these details help:
- What’s wrong with the joints now
- The type of property
- Any previous sealing or DIY work
- The rough size of the job
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.
Other services in Snargate
How the visit works
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on how much there is to do. Somewhere like Snargate needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Clear items away from the joints we’re working on
- Let us know about earlier repairs to the joints
- Tell us if parking is tricky
Getting a quote
Need a quote? Please ring 0345 464 0079 or send us an email and tell us about the job. We will explain what we’d do and give you a clear price before we start.
Related advice
What the job involves on each surface
Door frames
Our work is the joint between frame and wall. Doors, seals and closers are for a door specialist, and we’ll say if we spot a problem with them.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.