Oxfordshire · England
Shotover Hill Fire Rated Sealant
Fire rated sealant for Shotover Hill, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Door frames with gaps between frame and wall
- Damaged fire sealant left by other trades
- Joints picked up in a fire-stopping survey
How we handle fire rated sealant in Shotover Hill
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. Anything unsuitable comes out first and the gap is resealed with a product tested for that use. We work on service penetrations, flats & HMOs and linear gaps, and common reasons people get in touch are fire seals that have cracked with movement and linear gaps at the head of walls.
Around a place like Shotover Hill, halls, schools and small businesses all have washrooms and kitchens used by many people. Their sealant and fire-rated joints are as important as those in any bigger building.
The work is covered for a year after we finish. If anything is not right with it, phone 0345 464 0079 or drop us an email.
- Place
- Shotover Hill (OX3)
- Wider area
- Oxfordshire
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How we quote for fire rated sealant
Your quote is based on your job. We look at:
- Working hours on commercial sites
- The product the joint needs
- The old material and how stubborn it is
- How many areas need sealing
Doing several joints on one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Asking for a quote
Photos help, but a description is a good start. Try to tell us:
- The rough size of the job
- Whether it has been sealed before
- The address or postcode of the job
- Pictures of the joints, sent by email
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or drop us an email.
Commercial buildings in Shotover Hill
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Letting a property close to Oxford station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Managing a site like Wood Farm Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Shotover Hill is about 2 miles east of Oxford, in Oxfordshire. We provide fire rated sealant to homeowners, landlords and businesses in Shotover Hill and nearby. Shotover Hill is one of 443 places in Oxfordshire where we work for fire rated sealant.
Postcode districts we cover here for fire rated sealant: OX3. Streets in the area include Old Road, Mark Road and York Road, all of which we cover. Neighbouring places we cover for fire rated sealant include Risinghurst (1 mile north), Barton (1 mile north), Horspath (1 mile south-east), Littleworth (2 miles east) and Forest Hill (2 miles north-east). Within a short drive, we also cover Didcot (10 miles south), Bicester (10 miles north), Abingdon-on-Thames (6 miles south-west), Witney (13 miles west), Thame (9 miles east) and Wantage (15 miles south-west).
Landmarks near Shotover Hill
Locally, jobs take us to homes and businesses close to Cheney School, Headington Quarry Foundation Stage School and Crown & Thistle pub and the streets around them. Other local landmarks include St Francis Church (0.7 miles south-west) and Stansfeld Park (within half a mile north-west). The nearest railway station is Oxford station, about 3.3 miles west of the centre. Other landmarks nearby include Rumble Museum (1.2 miles west) and Templars Square (1.7 miles south-west). Not far away are Shotover and CS Lewis Nature Reserve.
How it works
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, we protect the area and start. Most jobs take anything from a few hours to several days, depending on how many gaps there are. A visit to Shotover Hill is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
Ask for a quote
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
Read more
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Do not paint over fire sealant until it has cured
- Flag any open gap you spot round a pipe or cable
- Tell trades working in the building that fire seals must be put back
- Photograph sealed gaps before they’re covered up
Don’t add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. Ask us if you’re not sure which product was used.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Sealing them early helps on every front.
Places near Shotover Hill
Also in Shotover Hill
When something else is needed
To be straight with you, some problems need a different trade:
- Sign-off of the building, which sits with building control or your assessor
- Openings too large for sealant, which need batts, boards or another system
- Assessing a building’s fire safety
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly before you book.
Surfaces we seal
- Service penetrations
- Plasterboard & masonry
- Pipe & cable gaps
- Door frames
- Linear gaps
- Flats & HMOs
Common problems we fix in Shotover Hill
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. We see plenty of fire stopping that was hurried particularly when it was the last job before handover.
These are the problems we’re asked about most:
- Standard silicone or caulk in a fire-stopping gap
- Gaps around pipes and cables through fire-resisting walls
- Joints picked up in a fire-stopping survey
- Open joints along the top of partitions
Community buildings like Holy Trinity Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Comparing quotes
- Whether all the old sealant comes out first
- What preparation is included
- What happens if they find a problem under the old sealant
- What insurance they hold
FAQs for Shotover Hill
Do you cover smaller places like Shotover Hill?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is Shotover Hill in your area for fire rated sealant?
Yes, Shotover Hill is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we will give you a clear quote.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available for many products, and we will agree it with you first.
Do you remove the old sealant?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Do you work in flats, HMOs and commercial buildings?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
Is intumescent sealant the same as fire-rated sealant?
Intumescent describes a material that swells in heat. Many fire-rated sealants work this way, but not all, and the choice depends on the gap.
Why it’s worth doing now in Shotover Hill
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the work involved is often modest. Homes in smaller places like Shotover Hill can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and give you a clear quote before we start.
Why choose Mr Mastic in Shotover Hill
- Anti-fungal sanitary silicone in wet areas
- Domestic, commercial and hotel work
- Neat joints and a tidy finish
- Fully insured
See what affects the cost and our reviews.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.