Oxfordshire · England
Fire Rated Sealant in Risinghurst
Our applicators work in Risinghurst on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Linear gaps at the head of walls
- Gaps left after a refit or conversion
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant in Risinghurst, done properly
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap. We work on flats & HMOs, pipe & cable gaps and linear gaps, and common reasons people get in touch are linear gaps at the head of walls and holes left by a change of layout.
Around a place like Risinghurst, halls, schools and small businesses all have washrooms and kitchens used by many people. Their sealant and fire-rated joints are as important as those in any bigger building.
You get a one-year guarantee, the same in Risinghurst as everywhere else we work.
- Where
- Risinghurst (OX3)
- Region
- Oxfordshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What we can’t put right
New sealant cannot fix everything, and we’d rather say so up front. It will not solve:
- Fire doors that need new seals, closers or hardware
- Certifying a building or signing off its fire safety
- Big openings where sealant alone isn’t the tested solution
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before you book.
Joints and surfaces we work on
- Service penetrations
- Linear gaps
- Door frames
- Pipe & cable gaps
- Plasterboard & masonry
- Flats & HMOs
Questions from Risinghurst
Can you do fire rated sealant in Risinghurst?
Yes, Risinghurst is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or email us and let us know what needs doing, and we will send you a clear quote.
Do you work for landlords with property near Oxford station?
Yes. We work for landlords and agents as well as householders. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Can I use normal mastic around a pipe through a fire wall?
No. Where a fire-rated seal is needed, it has to be a product tested for that use fitted to the maker’s details.
Where are you based?
We’re based in Crawley, and we work across South East England, London and Scotland.
Can you match the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before we start.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
DIY versus a professional finish
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
How the job changes by surface
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. We use a product tested in that kind of wall for each gap size.
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in.
How the visit works
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes anything from a few hours to several days, depending on how many gaps there are. In a smaller place like Risinghurst, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
How to prepare
- Let us know if you’ve seen damp or leaks
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
How to get a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will talk you through the work and give you a clear quote.
Advice
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Keep photos of seals that will be hidden
- Make resealing part of every contractor’s brief
- Ask which product was used before you paint
- File the fire-stopping record where your assessor can find it
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole.
Fire rated sealant around Risinghurst
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Schools such as Bayards Hill School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices. If you look after a church, hall or community building such as Parish Church of St Mary, service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Oxford station, any gap left by new services in shared walls should be closed with a fire-rated product.
Risinghurst is about 2 miles east of Oxford, in Oxfordshire. If you need fire rated sealant in Risinghurst, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We’re based in Crawley and cover Oxfordshire, Risinghurst included. Across Oxfordshire, we cover 443 places, Risinghurst among them.
Every address in OX3 is covered for fire rated sealant. You will find streets such as Mark Road, Kiln Lane and Pitts Road, all of which we cover. We also cover the places around Risinghurst: Shotover Hill (1 mile south), Barton (1 mile north-west), Forest Hill (2 miles east), Horspath (2 miles south-east) and Stanton St John (2 miles north-east). Larger places within reach include Didcot (11 miles south), Bicester (10 miles north), Abingdon-on-Thames (7 miles south-west), Witney (13 miles west), Thame (9 miles east) and Wantage (15 miles south-west).
Local landmarks in Risinghurst
Locally, jobs take us to homes and businesses close to Stansfeld Park, Cheney School and Holy Trinity Church, among other places. Nearby too are Headington Quarry Foundation Stage School (less than half a mile west) and The Six Bells pub (within half a mile west). The closest station to Risinghurst is Oxford station, roughly 3.5 miles west of the centre. A little further out are Templars Square (2.2 miles south-west) and Nuffield Orthopaedic Centre (0.9 miles south-west). Open spaces near Risinghurst include Shotover and CS Lewis Nature Reserve.
Towns and villages near Risinghurst
Also in Risinghurst
What affects the quote in Risinghurst
We do not publish a price list. What we look at:
- The product the joint needs
- Whether old sealant or filler has to be cut out
- Whether the work is at height
- Any working-time requirements on site
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Helping us quote
Before you ask for a quote, have a think about:
- The address or postcode of the job
- Photos by email, if that is easy
- Any access issues, like height or stairs
- What the problem is, such as mould, gaps, leaks or cracking
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.