Oxfordshire · England
Pyrton Fire Rated Sealant
Fire rated sealant for Pyrton and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Gaps flagged on a fire risk assessment
- Old fire sealant that has split or come away
- Gaps around pipes and cables through fire-resisting walls
Fire rated sealant in Pyrton, done properly
Bigger jobs can be worked through in stages, flat by flat or floor by floor. That record is useful for your files and for whoever looks at the building next. If you have cracked or shrunken fire-rated sealant and gaps around pipes and cables through fire-resisting walls, we can put it right, on linear gaps, service penetrations and flats & HMOs alike.
In a village or hamlet like Pyrton, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
We stand behind the work with a one-year guarantee.
- Place
- Pyrton (OX49)
- Wider area
- Oxfordshire
- Cover
- 12 months on all our work
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Different surfaces, different methods
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before we start so residents know what to expect.
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point to make sure it suits the product.
What fire rated sealant looks like in Pyrton
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details. Pyrton has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed.
Community buildings like St Mary's Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. Schools such as Watlington Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Pyrton is about 6 miles south of Thame, in Oxfordshire. Every kind of property in Pyrton is covered for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Pyrton is one of 443 towns and villages in Oxfordshire where we work for fire rated sealant. You can also see our page for Oxford, roughly 12 miles from Pyrton.
Every address in OX49 is covered for fire rated sealant, from the main roads to the quietest streets. Other places close to Pyrton include Watlington (1 mile south), Britwell Salome (2 miles south-west), Brightwell Baldwin (2 miles west), Chalgrove (3 miles west) and Ewelme (4 miles south-west). We also work in nearby towns such as Oxford (12 miles north-west), Didcot (11 miles west), Abingdon-on-Thames (12 miles west), Thame (6 miles north), Henley-on-Thames (10 miles south-east) and Benson (5 miles south-west).
Landmarks near Pyrton
Around Pyrton, our work takes us to homes and buildings near All Saints Church, Icknield Community College and The Chequers pub. The countryside around Pyrton includes Aston Rowant NNR and Bald Hill.
Why it’s worth doing now in Pyrton
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now means you can show the action was taken. Older cottages and farmhouses around Pyrton can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or drop us an email and we’ll talk you through it.
Why us?
- Over 20 years’ experience
- Approved under the ARBOMaster scheme
- Homes, businesses and hotels
- 180+ five-star Google reviews
Read what affects the cost and customer reviews.
Places near Pyrton
More services for Pyrton
Questions from Pyrton
Can you do fire rated sealant in Pyrton?
Yes. We work across London and the South East, and Pyrton is part of that. Just phone 0345 464 0079 or email us with a few details of the job.
Do you work for hotels and guest houses in Pyrton?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
What should I tell you?
A short description and the location, with pictures by email if possible. If we need more, we will ask.
Is intumescent sealant the same as fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent types expand when heated, and they’re one option among several. We use whichever the specification and tested details call for.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Where are you based?
We’re based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Photograph sealed gaps before they’re covered up
- Look in service cupboards and ceiling voids from time to time
- Never patch a fire seal with standard sealant
- Check whether a sealant can be painted before decorating over it
Don’t add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. Ask us if you’re not sure which product was used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is generally a straightforward job.
How it works
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Pyrton, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us if parking is tricky
- Clear the area around the work
Getting a quote
If you’re in Pyrton and need fire rated sealant, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before we start.
Advice
When it is not the sealant
It helps to know what we cannot do:
- Openings too large for sealant, which need batts, boards or another system
- Deciding what fire stopping a building needs
- Fire doors that need new seals, closers or hardware
If you are not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Where we work in Pyrton
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
- Door frames
- Plasterboard & masonry
Quotes for fire rated sealant in Pyrton
There’s no set price list, because jobs vary so much. The quote depends on:
- The old material and how stubborn it is
- Whether the work is at height
- Any working-time requirements on site
- The type of sealant required
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Asking for a quote
Before you ask for a quote, have a think about:
- Where the property is
- Photos by email, if that’s easy
- The rough size of the job
- Access, such as stairs, a lift or height
To get a quote, call 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Work for landlords, hotels and businesses
We work for letting agents and landlords as well as householders. Sealant work between tenants keeps a property looking cared for.
For anyone letting property in or around Pyrton, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.