Kent · England
Fire-rated sealant in Priestwood, Kent
Problem with your fire-stopping gaps in Priestwood? We remove the old material, prepare the joints and seal them properly.
- Fire seals that have cracked with movement
- Gaps around pipes and cables through fire-resisting walls
- Joints picked up in a fire-stopping survey
Fire rated sealant in Priestwood, done properly
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. We’re often asked to deal with gaps filled with a product that isn’t fire-rated and joints picked up in a fire-stopping survey, on service penetrations, pipe & cable gaps and door frames.
For holiday lets, converted business premises or a community building near Priestwood, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Our work is backed for twelve months, in Priestwood and everywhere else we cover.
- Location
- Priestwood (DA13)
- Wider area
- Kent
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What fire rated sealant looks like in Priestwood
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Schools such as Meopham School are buildings too, and fire-stopping around service openings should be restored whenever new services go in. If you let a flat or house near Sole Street station, any gap left by new services in shared walls should be closed with a fire-rated product.
Priestwood is about 5 miles south of Gravesend, in Kent. For fire rated sealant in and around Priestwood, please call 0345 464 0079 or send us an email for a quick quote. We cover Kent from our Crawley base, Priestwood included. Our area takes in 922 places across Kent, from the larger towns to small villages. Our London page covers work nearby.
Every address in DA13 is covered for fire rated sealant, from the main roads to the quietest streets. That includes homes and businesses on Chandler's Hill, Chandler's Road and Priestwood Road and the roads around them. Nearby, we also carry out fire rated sealant in Priestwood Green (1 mile south-west), Harvel (1 mile south), South Street (1 mile west), Foxendown (1 mile north) and Culverstone Green (1 mile south-west). Further out, we also cover Maidstone (9 miles south-east), Dartford (9 miles north-west), Sevenoaks (10 miles south-west), Gravesend (5 miles north), Tonbridge (12 miles south) and Northfleet (5 miles north).
Landmarks near Priestwood
Typical jobs here are in homes near Camer Park Country Park and the streets around them. The closest station to Priestwood is Sole Street station, about 1.9 miles north. A little further out are Leybourne Castle (4.1 miles south-east) and Coldrum Long Barrow (2.4 miles south). Not far away are Ranscombe Farm.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Priestwood questions
Is Priestwood in your area for fire rated sealant?
Yes, Priestwood is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or email us with a few details of the job, and we will give you a clear price.
Will you come out to Priestwood?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Will you assess my building’s fire safety?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is generally more efficient.
What does intumescent mean?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent types expand when heated, and they’re one of the options. We use whichever the specification and tested details call for.
Do you remove the old sealant?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Store the list of sealed gaps with your building paperwork
- Photograph sealed gaps before they’re covered up
- Get damaged fire seals looked at promptly
- Check whether a sealant can be painted before decorating over it
File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
Also near Priestwood
More services for Priestwood
Do you need fire rated sealant in Priestwood?
Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Knocks, maintenance and building work damage it further.
Common reasons people contact us include:
- Gaps where walls meet ceilings or slabs
- Ordinary sealant used where a fire-rated product was needed
- Damaged fire sealant left by other trades
- Sealant items on a fire risk assessment action list
Community buildings like Church of Our Lady of the Meadow are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Questions to ask before booking
- Whether you can choose the colour
- What the cure time is
- How hidden problems are handled
- What preparation is included
Surface by surface
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement, following the tested detail.
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
How the visit works
On the day, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before any work starts. The work generally takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Priestwood, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
Getting a quote
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work.
Related advice
When something else is needed
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Fire risk assessments, which need a qualified assessor
- Certifying a building or signing off its fire safety
- Problems with the door itself rather than the gap around the frame
If in doubt, call 0345 464 0079 or email us and we’ll say what we think.
What we seal
- Plasterboard & masonry
- Pipe & cable gaps
- Door frames
- Flats & HMOs
- Linear gaps
- Service penetrations
What affects the quote in Priestwood
There’s no set price list, because no two jobs are the same. What we look at:
- Which sealant suits the joint
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Where the job is, and your postcode
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
- If someone has resealed it before
Want a quote for fire rated sealant? Please phone 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.