Hampshire · England
Fire Rated Sealant in Phoenix Green
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Phoenix Green, backed by a one-year guarantee. Ask us for a quote.
- Open gaps behind door architraves
- Cracked or shrunken fire-rated sealant
- Open joints along the top of partitions
How we handle fire rated sealant in Phoenix Green
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it, so we follow the tested detail for each one. If you are dealing with fire stopping disturbed by later work and open gaps behind door architraves, we can put it right.
Work in a small place like Phoenix Green is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
All our work is covered by our 12-month guarantee.
- Place
- Phoenix Green (RG27)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about fire rated sealant in Phoenix Green
Is Phoenix Green within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you do fire rated sealant in Phoenix Green?
Yes. We work across London and the South East, and Phoenix Green is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Can ordinary silicone be used in a fire-stopping gap?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. We cut it out and reseal with a fire-rated product.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator.
Do you take on fire stopping in schools and offices?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
Can I add another job to the visit?
Of course. Doing several areas at once is normally more efficient, so mention them when you ask for a quote.
What should I tell you?
A short description and the location, plus photos if you have them. If we need more, we’ll ask.
Will you assess my building’s fire safety?
No. That is for a fire risk assessor, designer or building control. We apply fire-rated sealant to the requirements they set.
What happens on the day
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a handful of gaps, and longer for a whole building. Somewhere as small as Phoenix Green, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Clear the area around the work
- Mention any parking rules near the property
- Try not to wet indoor joints just before the visit
Ask for a quote
Asking for a quote is easy: let us know what needs doing and where. A few pictures by email make the job easier to understand, and we will come back to you with a quote.
Related advice
When something else is needed
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Fire doors that need new seals, closers or hardware
- Issuing a fire rating or certificate for a building
- Deciding what fire stopping a building needs
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Linear gaps
- Flats & HMOs
- Service penetrations
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
Towns and villages near Phoenix Green
Other services in Phoenix Green
Landlords, agents and businesses in Phoenix Green
We also work for property managers and facilities teams in Phoenix Green and across Hampshire. Several sites can be quoted together, and we’re fully insured for the work.
For anyone letting property in or around Phoenix Green, several properties can go on one quote. Just tell us the addresses and what each one needs.
Workplaces and buildings in Phoenix Green
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a building such as Greenfields Junior School, service openings in fire-resisting walls need checking after any refurbishment. Community buildings like St Mary's Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. Letting a property close to Winchfield station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Phoenix Green is about 3 miles north-west of Fleet, in Hampshire. Phoenix Green gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Phoenix Green is one of 683 towns and villages in Hampshire we cover. There’s also a page for Reading, about 11 miles away.
Work in RG27 works the same way as everywhere else we cover. Fire rated sealant is available to properties on Pippin Square, London Road and Weir Road and the roads around them. Other places close to Phoenix Green include Winchfield (1 mile south), West Green (1 mile north-west), Murrell Green (1 mile west), Hook (2 miles west) and Broad Oak (2 miles south). Within a short drive, we also cover Basingstoke (9 miles west), Farnborough (6 miles east), Fleet (3 miles south-east), Aldershot (7 miles south-east), Alton (10 miles south) and Yateley (4 miles north-east).
What’s near Phoenix Green
We work in homes and buildings around Phoenix Inn and Calthorpe Park School, among other places. For rail, the closest station is Winchfield station, about 0.7 miles south of the centre. A little further out are Hart Shopping Centre (3.1 miles east) and West Green House Agricultural Museum (1 mile north-west). Green spaces nearby include Dogmersfield Lake and Fleet Pond Nature Reserve.
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Leave it or put it right?
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up means you can show the action was taken. Around Phoenix Green, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Why us?
- Experience in homes, commercial sites and hotels
- Anti-fungal silicone where joints get wet
- Trusted Arbo and Everbuild sealants
- Over 20 years’ experience
Read what affects the cost and what customers say.
Keeping the joints in good condition
Looking after new joints is easy:
- Get damaged fire seals looked at promptly
- Check risers, ceiling voids and cupboards during building checks
- Make resealing part of every contractor’s brief
- Do not fill fire-stopping gaps with ordinary foam or silicone
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the list grows.
Surface by surface
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in.
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Where a hole is bigger than the sealant’s tested range, it needs another approach, and we’ll tell you.