Southampton · England
Peartree Green Fire Rated Sealant
Professional fire rated sealant in and around Peartree Green, with every bit of old sealant taken out first and a 12-month guarantee.
- Gaps flagged on a fire risk assessment
- Unsealed gaps where pipes and cables go through a wall
- Damaged fire sealant left by other trades
How we quote for fire rated sealant
We do not publish a price list, because no two jobs are the same. The quote depends on:
- How many areas need sealing
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
- The amount of work
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts, so you know where you stand.
Helping us quote
To help us quote quickly, please include:
- Roughly how big the job is
- Pictures of the joints, sent by email
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, phone 0345 464 0079 or drop us an email.
Fire rated sealant for homes and businesses in Peartree Green
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, and we can record what went where. Common call-outs are for open joints along the top of partitions and joints picked up in a fire-stopping survey, on linear gaps, pipe & cable gaps and plasterboard & masonry.
Community buildings, schools and small businesses around places like Peartree Green have washrooms and kitchens that see a lot of use. Their sealant and fire-rated joints are as important as those in any bigger building.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.

- Where
- Peartree Green (SO19, SO14)
- Region
- Southampton
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
FAQs for Peartree Green
Do you work in hotels near Peartree Green?
Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.
Do you cover smaller places like Peartree Green?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can ordinary silicone be used in a fire-stopping gap?
No. It might close the gap, but it is not a fire-rated seal. A tested fire-rated product is needed and we can apply it for you.
Are you insured?
Yes. We’re fully insured, and we can confirm the details when we quote.
Will it make a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Can you tell me how many minutes the seal will last?
We don’t issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
Is there a guarantee?
Yes. Every job comes with a one-year guarantee.
Will there be a smell?
Some sealants have a smell while they cure, but it fades. Opening a window helps.
What fire rated sealant looks like in Peartree Green
If you run a hotel, guest house or holiday let in a coastal place like Peartree Green, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. There are hotels and other places to stay in and around Peartree Green. Hotel work can be planned room by room, with out-of-hours working where needed.
For buildings such as Peartree Green United Reform Church, gaps around pipes and cables are worth checking after any building work there. For site and facilities teams at buildings such as Ludlow Infant Academy, fire-stopping around service openings should be restored whenever new services go in.
Peartree Green is about 1 mile south-east of Southampton, in Southampton. We provide fire rated sealant to householders, landlords and businesses in Peartree Green and the surrounding area. Peartree Green is one of 40 places in Southampton we cover for fire rated sealant.
Jobs for fire rated sealant in SO19 and SO14 works the same way as everywhere else we cover. Whether your property is on Sea Road, Hazel Road and Ailsa Lane or anywhere close by, our applicators can take on the job. We also cover the places around Peartree Green: Itchen (1 mile south-east), Northam (1 mile north), St Mary's (1 mile west), Bitterne (1 mile north-east) and Sholing (1 mile east). Within a short drive, we also cover Shirley (3 miles north-west), Regents Park (3 miles west), Maybush (4 miles north-west), Coxford (4 miles north-west), Lordswood (4 miles north-west) and Eling (5 miles west).
Landmarks near Peartree Green
We work in homes and buildings around Woolston School, Houndwell Park and Inspire Enterprise Academy, among other places. Peartree Green has its own railway station: Woolston station. A little further out are Netley Castle (2 miles south) and Marlands Shopping Centre (1.3 miles west). Open spaces near Peartree Green include Netley Common.
What we are called out for in Peartree Green
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. Rushed fire stopping is common, especially where it was squeezed in at the end of a project.
Keep an eye out for these signs:
- Gaps where walls meet ceilings or slabs
- Fire stopping disturbed by later work
- Gaps flagged on a fire risk assessment
- Door frames with gaps between frame and wall
If you let a flat or house near Woolston station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What to look for in a quote
- Are they insured?
- What happens if they find a problem under the old sealant
- What product goes in the joint
- Whether you can choose the colour
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Deciding what fire stopping a building needs
- Construction that doesn’t provide fire resistance on its own
- Problems with the door itself rather than the gap around the frame
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Linear gaps
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
How it works
When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. The work normally takes anything from a few hours to several days, depending on how many gaps there are. Parking around Peartree Green is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Finally, we list where we worked and what we used, for your records.
Getting ready for the visit
- Keep children and pets away from the work area
- Mention any parking rules near the property
- Let us know about stairs, lifts or work at height
How to get a quote
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job.
Read more
Nearby places to Peartree Green
More services for Peartree Green
Leave it or put it right?
For some gaps, sealant is not the right answer and another system is needed. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we will tell you. In an older home around Peartree Green, damp from a failed joint can get into timber and plaster, and that’s a much bigger job than renewing the sealant.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What you get with us
- 180+ five-star Google reviews
- Domestic, commercial and hotel work
- Neat joints and a tidy finish
- We never seal over old sealant
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Photograph sealed gaps before they’re covered up
- Check risers, ceiling voids and cupboards during building checks
- Store the list of sealed gaps with your building paperwork
- Plan fire stopping into any work that goes through walls or floors
Avoid covering a sealed gap with anything that isn’t part of the tested detail. If it needs repair, use the same type of product. Ask us if you’re not sure which product was used.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Get it sealed and recorded so the item can be closed.
