Kent · England
Painter's Forstal Fire Rated Sealant
Fire rated sealant for Painter's Forstal and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Open gaps behind door architraves
- Holes left by a change of layout
- Fire seals that have cracked with movement
Why it’s worth doing now in Painter's Forstal
Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, so we follow the maker’s details on every gap. Around Painter's Forstal, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.
Why Painter's Forstal clients choose us
- 12-month guarantee on every job
- Anti-fungal silicone where joints get wet
- Neat joints and a tidy finish
- Over 20 years’ experience
Take a look at our cost guide and what customers say.
Fire rated sealant in Painter's Forstal, done properly
Door frame gaps, linear joints and holes around services all have their own details. Measuring the gap and checking what it’s made of comes first, then the sealant goes in to the depth the product’s details set. We work on pipe & cable gaps, linear gaps and plasterboard & masonry, and common reasons people get in touch are ordinary sealant used where a fire-rated product was needed and open gaps behind door architraves.
Work in a small place like Painter's Forstal is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
You get a 12-month guarantee, the same in Painter's Forstal as everywhere else we work.
- Location
- Painter's Forstal (ME13)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Nearby places to Painter's Forstal
More services for Painter's Forstal
Workplaces and buildings in Painter's Forstal
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Faversham station, any gap left by new services in shared walls should be closed with a fire-rated product. For buildings such as Church of St Peter and St Paul, service openings in its walls need the right fire-rated sealant, as in any building.
Painter's Forstal is about 2 miles south-west of Faversham, in Kent. We carry out fire rated sealant for homes and businesses in Painter's Forstal, as part of our work across Kent. 922 places in Kent are on our list, from the larger towns to small villages. We also work in Chelmsford, about 34 miles from Painter's Forstal.
Our applicators cover all of the ME13 postcode area for fire rated sealant. If you need fire rated sealant at a property on Cades Orchard, Eastling Road and Painter's Forstal Road or a nearby road, our applicators can take on the job. We also cover the places around Painter's Forstal: North Street (1 mile south-east), Sheldwich (2 miles south-east), Sheldwich Lees (2 miles south-east), Throwley (2 miles south) and Eastling (2 miles south-west). We also work in nearby towns such as Maidstone (14 miles west), Ashford (11 miles south), Canterbury (10 miles east), Sittingbourne (6 miles north-west), Whitstable (8 miles north-east) and Herne Bay (13 miles north-east).
Landmarks near Painter's Forstal
Typical jobs here are in homes near The Alma pub and The Abbey School, among other places. For rail, the closest station is Faversham station, about 1.8 miles north-east of the centre. Other landmarks nearby include Newnham Castle (2.5 miles west).
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Different surfaces, different methods
Linear gaps
A linear joint may need to allow for movement as well as fire. The product and depth are chosen to suit both, following the tested detail.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing so the seal has something sound to bond to.
When something else is needed
New sealant can’t fix everything, and we’ll tell you before we start. Sealant won’t put right:
- Sign-off of the building, which sits with building control or your assessor
- A wall that isn’t a fire-resisting element to begin with
- Doors that aren’t fire doors in the first place
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Painter's Forstal
- Plasterboard & masonry
- Flats & HMOs
- Linear gaps
- Door frames
- Pipe & cable gaps
- Service penetrations
How the visit works
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and tidy away. Most jobs take anything from a few hours to several days, depending on how many gaps there are. Somewhere like Painter's Forstal needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Preparing for the visit
- On commercial sites, let us know about site rules
- Clear items away from the joints we are working on
- For indoor joints, keep the area dry beforehand if you can
Get a quote
If you’re in Painter's Forstal and need fire rated sealant, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.
Advice
Common problems we fix in Painter's Forstal
In some buildings the gap was filled with the wrong thing in the first place: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.
Any of these means the joints need attention:
- Door frames with gaps between frame and wall
- Gaps filled with a product that isn’t fire-rated
- Gaps flagged on a fire risk assessment
- Holes left by a change of layout
Schools such as Ospringe Church of England Primary School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
Before you book anyone
- What the cure time is
- Whether you can choose the colour
- How long the guarantee is
- Whether they’re fully insured
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report. Several properties can go on one quote.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Questions from Painter's Forstal
Can you help a landlord with a rental near Faversham station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Is Painter's Forstal in your area for fire rated sealant?
Yes, Painter's Forstal is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.
Can you work in occupied buildings?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
Can ordinary silicone be used in a fire-stopping gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What does fire rated sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or send us an email and tell us what needs doing and where.
Do the sealants smell?
That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.