Kent · England

Fire-rated sealant in Oare, Kent

Fire-stopping gaps in Oare need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • Gaps around pipes and cables through fire-resisting walls
  • Gaps filled with a product that is not fire-rated
  • Gaps flagged on a fire risk assessment

Trusted fire rated sealant in Oare

Fire rated sealant for homes and businesses in Oare

A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. We’re often asked to deal with old fire sealant that has split or come away and seals cut through by electricians, plumbers or data installers, across service penetrations, plasterboard & masonry and flats & HMOs.

In a village or hamlet like Oare, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.

We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.

The Mr Mastic team in navy uniforms in front of three Mr Mastic vans
Where
Oare (ME13)
Wider area
Kent
Guarantee
12 months on all our work
Price
Quoted before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026

When something else is needed

Honest advice matters more to us than a booking, so here’s what sealant can’t fix:

  • Openings too large for sealant, which need batts, boards or another system
  • Construction that does not provide fire resistance on its own
  • Deciding what fire stopping a building needs

If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer.

Where we work in Oare

  • Service penetrations
  • Linear gaps
  • Plasterboard & masonry
  • Pipe & cable gaps
  • Door frames
  • Flats & HMOs

What we are called out for in Oare

Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole round the new service is not always sealed again.

People normally contact us when they notice one of these:

  • New service routes left unsealed after building work
  • Fire stopping disturbed by later work
  • Gaps flagged on a fire risk assessment
  • Gaps where walls meet ceilings or slabs

Rented homes near Faversham station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.

What your quote should include

  • How the joint is cleaned and prepared
  • What product goes in the joint
  • What the cure time is
  • Whether VAT is included

Our hiring checklist

Questions from Oare

I let a flat near Faversham station. Can you help?

Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.

Will you come out to Oare?

Yes, Oare is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Should I try DIY first?

That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.

Can I add another job to the visit?

Yes. More than one area can be quoted together.

Can you tell me which gaps need fire stopping?

No. We follow the requirements from your assessor, designer or building control and install to the manufacturer’s details.

Can you fill the gap behind a fire door frame?

Yes. The joint between frame and wall is sealed with a fire-rated sealant. The door, its seals and closer are for a door specialist.

What should I tell you?

Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or send us an email.

Are you fully insured?

Yes. Full insurance covers our work.

Different surfaces, different methods

Masonry and concrete

Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first.

Flats and HMOs

Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product and record where they are.

DIY sealant or a professional job?

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

How to look after the new joints

Good habits help new joints last longer. A few tips:

  • Do not paint over fire sealant until it has cured
  • Flag any open gap you spot round a pipe or cable
  • Make resealing part of every contractor’s brief
  • File the fire-stopping record where your assessor can find it

Follow the cure time we give you before decorating over the sealant. Not every fire-rated sealant takes paint and we will tell you which one you have.

Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the list grows.

Commercial buildings in Oare

If you run a hotel, guest house or holiday let in a coastal place like Oare, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Oare has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.

Community buildings like Church of St Peter are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. For site and facilities teams at buildings such as Davington Primary School, service openings in fire-resisting walls need checking after any refurbishment.

Oare is about 1 mile north of Faversham, in Kent. If you need fire rated sealant in Oare, it’s easy to get a quote: please phone 0345 464 0079 or send us an email. We cover Kent from our Crawley base, Oare included. Our area takes in 922 places across Kent, large and small. Our Chelmsford page covers work nearby (33 miles or so).

We cover every part of the ME13 postcode area for fire rated sealant. We cover properties on The Street, Church Road and Russell Place and the roads around them. Other places close to Oare include Davington (1 mile south), The Brents (1 mile south-east), Uplees (1 mile north-west), Faversham (1 mile south) and Four Oaks (1 mile south-west). We also work in nearby towns such as Ashford (13 miles south), Canterbury (9 miles east), Sittingbourne (6 miles west), Whitstable (7 miles east), Herne Bay (11 miles east) and Minster (7 miles north-west).

Around Oare

Locally, jobs take us to homes and businesses close to Oare Meadow, Three Mariners Inn and Queen Elizabeth's Grammar School. The nearest railway station is Faversham station, roughly 1.4 miles south-east. Well-known places in the area include Newnham Castle (4.5 miles south-west).

Map of Oare © OpenStreetMap contributors

What we do, step by step

We keep the work tidy and contained to the area we are working on, so you can carry on as normal. Expect the work to take anything from a few hours to several days, depending on how many gaps there are, and we tell you how long to leave it before we go. Somewhere like Oare needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. First we work through your list or survey, measuring each gap and checking what it’s formed in.
  2. Anything that isn’t fit for the job comes out, and the gap is cleaned.
  3. Backing or fill is fitted where the product’s tested detail calls for it.
  4. Fire-rated or intumescent sealant is applied to the right depth and tooled.
  5. We record the locations and products used for your records.

Preparing for the visit

  • Tell us about any previous sealing or DIY attempts
  • Let us know if you’ve seen damp or leaks
  • Let us know about parking restrictions

Ask for a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, ring 0345 464 0079 or send us an email.

Get a price

Advice

Landlords, agents and businesses in Oare

Mouldy or split sealant often shows up at the end of a tenancy. Several properties can go on one quote.

Landlords and letting agents in Oare can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job