Hampshire · England
Fire-rated sealant in Neatham, Hampshire
Fire rated sealant across Neatham and nearby, with old sealant always removed completely and a one-year guarantee.
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps around fire door frames
- Joints picked up in a fire-stopping survey
Signs you need fire rated sealant in Neatham
Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk in a place that needed a tested fire seal. It looks sealed, but it is not fire-rated.
It’s worth asking for a quote if you see:
- Unsealed gaps where pipes and cables go through a wall
- New service routes left unsealed after building work
- Linear gaps at the head of walls
- Unsealed gaps around fire door frames
Rented homes near Alton station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Before booking anyone
- Whether they’re fully insured
- What the cure time is
- Is VAT in the price?
- Who turns up on the day
Fire rated sealant in Neatham, done properly
Door frame gaps, linear joints and holes around services all have their own details. Measuring the gap and checking what it’s made of comes first, then the sealant goes in to the depth the product’s details set. If you have old fire sealant that has split or come away and open holes round services passing through fire walls, we can help.
For holiday lets, converted business premises or a community building near Neatham, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
We stand behind the work with a one-year guarantee.
- Where
- Neatham (GU34)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Fire rated sealant around Neatham
Neatham has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Managing a site like Andrews' Endowed Church of England Primary School? Then fire-stopping around service openings should be restored whenever new services go in. Community buildings like Holy Rood Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Neatham is about 2 miles north-east of Alton, in Hampshire. For fire rated sealant in and around Neatham, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We cover Hampshire from our Crawley base, Neatham included. We cover 683 towns and villages across Hampshire, from the larger towns to small villages. We also work in Reading, around 20 miles away.
We work across GU34 for fire rated sealant. Other places close to Neatham include Holybourne (1 mile north-west), Wyck (1 mile south-east), Upper Froyle (1 mile north-east), Alton (2 miles south-west) and East Worldham (2 miles south). We also work in nearby towns such as Basingstoke (10 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north-east), Aldershot (10 miles north-east), Petersfield (11 miles south) and Yateley (13 miles north).
Local landmarks in Neatham
We work in homes and buildings around Treloar School, White Hart pub and Eggar's School and the streets around them. For rail, the closest station is Alton station, about 1.3 miles south-west. A little further out are Allen Gallery (1.6 miles south-west) and Alton Community Hospital (2.6 miles south-west). Open spaces near Neatham include Holybourne Hill.
How we quote for fire rated sealant
For a quick quote, just ask. The main things that affect it are:
- How easy the joints are to reach
- Any mould that needs treating
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
Doing several joints on one visit usually makes better use of the time than several visits. We’ll give you a clear quote for the lot.
Asking for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Any access issues, like height or stairs
- A few photos by email, if you can
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
If you are in Neatham and need fire rated sealant, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before we start.
FAQs for Neatham
Do you cover smaller places like Neatham?
Yes, Neatham is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for hotels and guest houses in Neatham?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How long will you be here?
That depends on the amount of work, but as a guide it takes from a few hours to a few days, depending on the number of gaps and the access. We’ll give you a better idea when we quote.
What sealant do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in.
Where is Mr Mastic based?
Our base is Crawley. We work across South East England, London and Scotland.
What should I tell you?
A short description and the location, plus photos if you have them. We will ask anything else we need to know.
Places near Neatham
What else we do in Neatham
How the job changes by surface
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. We use a product tested in that kind of wall for each gap size.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. Each one is sealed to the product’s tested detail, and tell you if sealant alone isn’t the right fix.
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
For anyone letting property in or around Neatham, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
Leave it or put it right?
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job and needn’t wait for anything else. Older cottages and farmhouses around Neatham can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Why us?
- A 12-month guarantee on all work
- We leave the area clean and tidy
- More than 20 years in sealant work
- Homes, businesses and hotels
Take a look at how sealant jobs are priced and our reviews.
When it is not the sealant
Sealant is not the answer to every problem, and we’d rather say so up front. It won’t solve:
- Fire risk assessments, which need a qualified assessor
- Issuing a fire rating or certificate for a building
- Doors that are not fire doors in the first place
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Surfaces we seal
- Service penetrations
- Flats & HMOs
- Door frames
- Linear gaps
- Plasterboard & masonry
- Pipe & cable gaps
How the visit works
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Neatham needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Preparing for the visit
- Tell us if parking is tricky
- Let us know about stairs, lifts or work at height
- Move anything stored near the joints
Ask for a quote
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will talk you through the work.