Medway · England
Fire-rated sealant in Mockbeggar, Medway
Problem with your fire-stopping gaps in Mockbeggar? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Door frames with gaps between frame and wall
- Ordinary sealant used where a fire-rated product was needed
- Cracked or shrunken fire-rated sealant
Fire rated sealant for homes and businesses in Mockbeggar
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That detail is what we take care over. If you have open gaps behind door architraves and gaps flagged on a fire risk assessment, we can put it right.
If you have holiday lets, a converted barn used for business or a community building near Mockbeggar, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Our work is backed for twelve months, in Mockbeggar and everywhere else we cover.
- Place
- Mockbeggar (ME3)
- Wider area
- Medway
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Ask which product was used before you paint
- Flag any open gap you spot round a pipe or cable
- Include hidden areas like risers in routine checks
- Photograph sealed gaps before they’re covered up
Avoid covering a sealed gap with anything that isn’t part of the tested detail. Repairs should use a matching fire-rated product. Ask us if you are not sure which product was used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is generally a straightforward job.
The process
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the work takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. In a small place like Mockbeggar, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Preparing for the visit
- Mention any parking rules near the property
- For indoor joints, keep the area dry beforehand if you can
- For business premises, tell us about site rules or sign-in
How to get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, ring 0345 464 0079 or email us.
Related advice
Mockbeggar: your questions answered
Do you cover smaller places like Mockbeggar?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you do fire rated sealant in Mockbeggar?
Yes. We work across London and the South East, and Mockbeggar is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job, and we’ll send you a clear quote.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Is there a guarantee?
Yes. All our work carries our 12-month guarantee.
Can ordinary silicone be used in a fire-stopping gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use, installed to its details.
Do you provide details of the products used?
Yes. We record the locations we have sealed and the products used.
Landlord and commercial work in Mockbeggar
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Nearby places to Mockbeggar
Also in Mockbeggar
What we are called out for in Mockbeggar
Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole round the new service is not always sealed again.
It’s worth asking for a quote if you see:
- Unsealed gaps around fire door frames
- Standard silicone or caulk in a fire-stopping gap
- Damaged fire sealant left by other trades
- Fire seals that have cracked with movement
If you let a flat or house near Higham station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
What to look for in a quote
- What happens if they find a problem under the old sealant
- What guarantee comes with the work
- Whether all the old sealant comes out first
- Is VAT in the price?
What fire rated sealant looks like in Mockbeggar
If you run a hotel, guest house or holiday let in a coastal place like Mockbeggar, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a building such as Cliffe Woods Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Mockbeggar is about 2 miles north of Rochester, in Medway. Homes, rented property, offices and hotels in Mockbeggar is covered for fire rated sealant. Every job comes with our one-year guarantee. Across Medway, we cover 68 places, Mockbeggar among them. Our Chelmsford page covers work nearby (22 miles or so).
Jobs for fire rated sealant in ME3 works the same way as everywhere else we cover. Whether your property is on Bunters Hill Road and Town Road or a nearby road, our applicators can take on the job. Nearby, we also carry out fire rated sealant in Cliffe Woods (1 mile north-east), Lower Higham (1 mile west), Church Street (2 miles north-west), Higham (2 miles west) and Gadshill (2 miles south-west). Within a short drive, we also cover Gillingham (5 miles south-east), Chatham (5 miles south), Rainham (7 miles south-east), Luton (4 miles south-east), Park Wood (7 miles south-east) and Lordswood (6 miles south).
Local landmarks in Mockbeggar
We work in homes and buildings around Temple School, Strood Academy and Broomhill Park. The nearest railway station is Higham station, about 1.2 miles west of the centre. Well-known places in the area include French Hospital (2.4 miles south) and Pentagon Shopping Centre (3 miles south-east). Green spaces nearby include Rede Common and Gad's Hill.
How the job changes by surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both from the manufacturer’s details.
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before work begins so residents know what to expect.
What affects the quote in Mockbeggar
The quote reflects the job in front of us. We look at:
- How many rooms, windows or areas are involved
- How much there is to do
- The product the joint needs
- Any working-time requirements on site
What it costs depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.
Helping us quote
Before you ask for a quote, have a think about:
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.