Kent · England
Fire-rated sealant in Liverton Street, Kent
Problem with your fire-stopping gaps in Liverton Street? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Unsealed gaps around fire door frames
- New service routes left unsealed after building work
- Gaps where walls meet ceilings or slabs
About our fire rated sealant in Liverton Street
We often work from an action list drawn up by a fire risk assessor for buildings in Liverton Street. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. If you have open joints along the top of partitions and joints picked up in a fire-stopping survey, we can put it right.
Somewhere as small as Liverton Street, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Each job carries a 12-month guarantee, large or small.
- Location
- Liverton Street (ME17)
- Region
- Kent
- Cover
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Liverton Street questions
Can you help a landlord with a rental near Lenham station?
Yes. We work for landlords and agents as well as homeowners. You can call 0345 464 0079 or email us with the details for a clear quote.
Can you do fire rated sealant in Liverton Street?
Yes. We work across London and the South East, and Liverton Street is part of that. You can ring 0345 464 0079 or send us an email and tell us what needs doing, and we will give you a clear quote.
Is standard sealant good enough for a fire gap?
No. It might close the gap, but it is not a fire-rated seal. Use a product tested for that gap and service, or ask us to do it.
Do you hold any approvals?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
What fire rating will the seal have?
That is not something we state or certify. The requirement comes from your assessor, designer or building control, and we apply a product tested for it with a record of each location.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Can you work in occupied buildings?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
Quotes for fire rated sealant in Liverton Street
Jobs vary more than people expect. What affects the quote:
- Whether the work is at height
- How many areas need sealing
- Any mould that needs treating
- The size of the job
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are not sure whether it needs doing, call 0345 464 0079 or email us and we will give you an honest view and a quote.
Asking for a quote
There’s no need for technical detail. It helps if you can tell us:
- Roughly how big the job is
- Photos by email, if that’s easy
- What’s wrong with the joints now
- Whether it’s a home or a business
Every job is quoted individually. Simply ring 0345 464 0079 or send us an email and describe the job and send photos if you have them.
What the job involves on each surface
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- A wall that is not a fire-resisting element to begin with
- Issuing a fire rating or certificate for a building
- Large holes that need a different fire-stopping system
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Surfaces we seal
- Flats & HMOs
- Plasterboard & masonry
- Pipe & cable gaps
- Linear gaps
- Door frames
- Service penetrations
Landlord and commercial work in Liverton Street
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too in Liverton Street and across Kent. We can quote a run of properties together.
What fire rated sealant looks like in Liverton Street
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Managing a site like Platts Heath Primary School? Then fire-stopping around service openings should be restored whenever new services go in. Letting a property close to Lenham station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For buildings such as Church of St Nicholas, older buildings that have had new heating or wiring often have service gaps worth checking.
Liverton Street is about 8 miles south-east of Maidstone, in Kent. Across the ME17 area, we cover fire rated sealant for homes and businesses. Across Kent, we cover 922 places, Liverton Street among them. You can also see our page for Chelmsford, about 37 miles away.
Postcode districts we cover here for fire rated sealant: ME17. We also cover the places around Liverton Street: Platt's Heath (1 mile north-east), Boughton Malherbe (1 mile south-east), Grafty Green (1 mile south), Fairbourne Heath (1 mile west) and Sandway (1 mile north-east). Within a short drive, we also cover Maidstone (8 miles north-west), Ashford (10 miles south-east), Sittingbourne (9 miles north), Faversham (11 miles north-east), Minster (15 miles north) and Kings Hill (13 miles west).
Near you in Liverton Street
We work in homes and buildings around The Lenham School, Kiln Wood and The Kings Head Public House, among other places. The nearest railway station is Lenham station, about 1.6 miles north-east. A little further out are Coldbridge Castle (1.5 miles south-east) and The Dog Collar Museum (3 miles north-west).
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a few hours for a handful of gaps, and longer for a whole building, including the tidy-up. Somewhere as small as Liverton Street, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- For business premises, tell us about site rules or sign-in
- Let us know about parking restrictions
How to get a quote
Asking for a quote is easy: tell us what needs doing and where. A few photos by email make the job easier to understand, and we’ll take it from there.
Advice
Nearby places to Liverton Street
Other services in Liverton Street
Why deal with it now?
Sealant is not the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap isn’t suitable for sealant, we’ll tell you. In a small place like Liverton Street, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why Liverton Street customers choose us
- Anti-fungal silicone where joints get wet
- An ARBOMaster approved applicator
- Tidy, careful work
- Arbo and Everbuild products
See what affects the cost and what customers say.