Kent · England

Fire Rated Sealant in Kit's Coty

Our applicators work in Kit's Coty on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.

  • Unsealed gaps around fire door frames
  • Seals cut through by electricians, plumbers or data installers
  • New service routes left unsealed after building work

Fire rated sealant for Kit's Coty homes and businesses

How to look after the new joints

Looking after new joints is easy, and it makes a real difference:

  • Keep photos of seals that will be hidden
  • Make resealing part of every contractor’s brief
  • File the fire-stopping record where your assessor can find it
  • Ask which product was used before you paint

Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.

Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.

Fire rated sealant for homes and businesses in Kit's Coty

Ordinary silicone or decorators’ caulk in a fire-stopping gap is not a fire-rated seal. We cut out the wrong material and the gap is resealed with a product tested for that use. We work on service penetrations, flats & HMOs and plasterboard & masonry, and the jobs we see most are damaged fire sealant left by other trades and standard silicone or caulk in a fire-stopping gap.

For holiday lets, converted business premises or a community building near Kit's Coty, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

You get a 12-month guarantee, the same in Kit's Coty as everywhere else we work.

Place
Kit's Coty (ME20)
Wider area
Kent
Guarantee
One year on every job
Quote
A clear price before work begins
Phone
0345 464 0079
Last updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

Can I do it myself?

A DIY attempt does not rule out a professional job. We remove it and do the joint properly.

The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

For landlords and businesses

From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.

Surface by surface

Linear gaps

Head-of-wall gaps are often hidden above suspended ceilings. We work along the whole run so there are no open sections left.

Door frames

Frame gaps are normally hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size.

Questions from Kit's Coty

Do you cover Kit's Coty for fire rated sealant?

Yes, Kit's Coty is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.

Do you work for landlords with property near Aylesford station?

Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.

Are you ARBOMaster approved?

Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.

Do you have insurance?

Yes. We’re fully insured.

Can you fill the gap behind a fire door frame?

Yes, where the gap suits a sealant detail. Our work is the gap around the frame, and we’ll mention anything we notice about the door.

What information do you need?

Where the job is, what the problem is and roughly how big it is. Photos by email help too.

What does fire rated sealant cost?

The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we’ll talk you through it.

Will the old sealant be removed?

Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.

Why it’s worth doing now in Kit's Coty

Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, so we follow the maker’s details on every gap. Around Kit's Coty, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.

Why Kit's Coty clients choose us

  • 12-month guarantee on every job
  • We’re fully insured
  • Quality sealants from Arbo and Everbuild
  • Anti-fungal silicone where joints get wet

See our cost guide or customer reviews.

The process

A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and clear up. It usually takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Kit's Coty, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. Before starting, we go through the specification or action list with you.
  2. We measure every gap and note what it’s in and what passes through.
  3. Unsuitable material such as ordinary foam or silicone is cut out.
  4. The specified fire-rated sealant goes in over any backing its detail requires.
  5. Every location is recorded with the product used.

Preparing for the visit

  • Tell us about any water getting in
  • Move anything stored near the joints
  • On commercial sites, let us know about site rules

Get a quote

We do not publish a price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or send us an email.

Get a quick quote

Read more

What affects the quote in Kit's Coty

Call for a quick quote. What matters most is:

  • Any mould that needs treating
  • How easy the joints are to reach
  • The old material and how stubborn it is
  • The type of sealant required

Doing several joints on one visit is normally more efficient than separate visits. You’ll get one clear quote for the whole job.

What we need to know

When you contact us, these details help:

  • How many joints, rooms or windows are involved
  • The problem you’ve noticed
  • Access, such as stairs, a lift or height
  • Whether it’s a home or a business

We quote each job on its own, so start by telling us what you need. Just ring 0345 464 0079 or email us with the details, and photos are welcome.

Fire rated sealant in Kit's Coty: local notes

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.

For buildings such as St Alban's Church, service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Aylesford station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Tunbury Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.

Kit's Coty is about 3 miles south-west of Chatham, in Kent. Jobs in Kit's Coty get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 922 places across Kent, from the larger towns to small villages. London is on our list too, about 29 miles from Kit's Coty.

Postcode districts we cover here for fire rated sealant: ME20. If you need fire rated sealant at a property on Queenswood Road, Russell Road and Beresford Road or anywhere close by, our applicators can take on the job. Close by, we work in Blue Bell Hill (1 mile north), Walderslade (1 mile north-east), Lordswood (2 miles north-east), Boxley (2 miles south-east) and Lidsing (3 miles east). Larger places within reach include Maidstone (4 miles south), Sittingbourne (10 miles east), Dartford (15 miles north-west), Sevenoaks (14 miles west), Gravesend (9 miles north-west) and Tonbridge (13 miles south-west).

Local landmarks in Kit's Coty

Locally, jobs take us to homes and businesses close to Greenacre Academy, Lower Bell pub and Westfield Wood, among other places. The nearest railway station is Aylesford station, roughly 2.3 miles south-west of the centre. Nearby you’ll also find Allington Castle (2.1 miles south) and KIMS hospital (3.4 miles south-east). For a walk, there’s Blue Bell Hill and Burham Down.

Map of Kit's Coty © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job