West Sussex · England
Fire-rated sealant in Kirdford, West Sussex
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Kirdford, with a 12-month guarantee on every job. Call for a quick quote.
- Seals cut through by electricians, plumbers or data installers
- Joints picked up in a fire-stopping survey
- Unsealed gaps where pipes and cables go through a wall
Fire rated sealant in Kirdford
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That’s the part we focus on, one gap at a time. We work on flats & HMOs, linear gaps and service penetrations, and common reasons people get in touch are new service routes left unsealed after building work and unsealed gaps where pipes and cables go through a wall.
Work in a small place like Kirdford is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Kirdford (RH14)
- Wider area
- West Sussex
- Cover
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
How to look after the new joints
To keep the joints looking good and working properly:
- Tell trades working in the building that fire seals must be put back
- Look in service cupboards and ceiling voids from time to time
- Photograph sealed gaps before they’re covered up
- Report cracked or damaged seals as soon as you notice them
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the list grows.
The process
There is not much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a few hours for a handful of gaps, and longer for a whole building, including the tidy-up. Somewhere as small as Kirdford, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Simply call 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
Advice
Why it’s worth doing now in Kirdford
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, so we follow the maker’s details on every gap. Around Kirdford, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Why book with us
- Old sealant always removed completely
- Tidy, careful work
- Experience in homes, commercial sites and hotels
- 20+ years of sealant experience
Take a look at our cost guide or our reviews.
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
How we quote for fire rated sealant
Every job gets its own quote. This is what makes a difference:
- Access and height
- The size of the job
- Whether there’s mould to deal with
- The type of sealant required
The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins.
Helping us quote
To help us quote quickly, please include:
- Whether it has been sealed before
- Roughly how big the job is
- If it’s domestic, commercial or a hotel
- Where the property is
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.
Do you need fire rated sealant in Kirdford?
Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. Rushed fire stopping is common particularly when it was the last job before handover.
Common reasons people contact us are:
- Unsealed gaps where pipes and cables go through a wall
- Old fire sealant that has split or come away
- Open joints along the top of partitions
- Standard silicone or caulk in a fire-stopping gap
If you look after a church, hall or community building such as The Parish Church of St John the Baptist, service openings in its walls need the right fire-rated sealant, as in any building.
Before you book anyone
- Who turns up on the day
- The length of the guarantee
- What preparation is included
- What happens if the job turns out different
What fire rated sealant looks like in Kirdford
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Letting a property close to Billingshurst station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Kirdford is about 10 miles west of Horsham, in West Sussex. From the centre of Kirdford to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Kirdford is one of 371 towns and villages in West Sussex where we work. There’s also a page for Crawley, about 17 miles away.
Every address in RH14 is covered for fire rated sealant. Whether your property is on Oakside, Poplar Walk and Maple Drive or a nearby road, our applicators can take on the job. Other places close to Kirdford include Mackerel's Common (1 mile north), Balls Cross (2 miles west), Wisborough Green (2 miles east), Plaistow (2 miles north) and Ifold (2 miles north). Further out, we also cover Horsham (10 miles east), Littlehampton (15 miles south), Storrington (9 miles south-east), Billingshurst (5 miles east), Bewbush (15 miles east) and Angmering (15 miles south).
What’s near Kirdford
The nearest railway station is Billingshurst station, roughly 4.7 miles east. Not far away are Shillinglee Lake and The Mens.
Places near Kirdford
More services for Kirdford
Your questions about fire rated sealant in Kirdford
Do you cover Kirdford for fire rated sealant?
Yes, Kirdford is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
Is Kirdford within the area you cover?
Yes. Kirdford is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Do I have to be there?
It depends on the job. Inside work needs someone to give us access.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Can I add another job to the visit?
Of course. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
Will you assess my building’s fire safety?
No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we’ll quote for the sealant work on it.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.