Shetland Islands · Scotland
Kalliness Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Kalliness, backed by a 12-month guarantee. Ask us for a quote.
- Open joints along the top of partitions
- Open holes round services passing through fire walls
- Gaps left after a refit or conversion
Fire rated sealant for homes and businesses in Kalliness
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. Common call-outs are for gaps around pipes and cables through fire-resisting walls and gaps where walls meet ceilings or slabs, on service penetrations, linear gaps and flats & HMOs.
Work in a place like Kalliness is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
Big or small, it’s backed by our 12-month guarantee.
- Place
- Kalliness (ZE2)
- Region
- Shetland Islands
- Cover
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Take photos of fire stopping before ceilings or boxing go back
- Include hidden areas like risers in routine checks
- File the fire-stopping record where your assessor can find it
- Do not paint over fire sealant until it has cured
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and get them seen to.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.
What happens on the day
A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and clear up. Most jobs take a few hours for a handful of gaps, and longer for a whole building. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Try not to wet indoor joints just before the visit
- Tell us about any previous sealing or DIY attempts
Get a quote
Every job is quoted individually, so start by telling us what you need. Just drop us a line at info@mrmastic.co.uk with the details.
Related advice
Places near Kalliness
Other services in Kalliness
Fire rated sealant in Kalliness: local notes
For seaside hotels, guest houses and holiday lets around Kalliness, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
Whether the job is in Kalliness itself or nearby, the right material for each joint matters as much as a neat finish.
Kalliness is in the Shetland Islands. For fire rated sealant in and around Kalliness, please send an email to info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover the Shetland Islands, Kalliness included. Across the Shetland Islands, we cover 63 places, and Kalliness is one of them.
Here we cover the ZE2 postcode area for fire rated sealant. Close by, we work in Gott (4 miles south-east), Veensgarth (4 miles south-east), Aith (4 miles north-west), Vassa (5 miles north-east) and Easter Skeld (6 miles south-west). Within a short drive, we also cover Lerwick (7 miles south-east), Sound (7 miles south-east), Scalloway (6 miles south) and Brae (12 miles north). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.
Landmarks near Kalliness
Well-known places in the area include Castle Holm (1.5 miles south). Open spaces near Kalliness include Loch of Hellister and Russaness Hill.
When to call us in Kalliness
Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.
Look out for any of the following:
- New service routes left unsealed after building work
- Fire seals that have cracked with movement
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps where pipes and cables go through a wall
Around Kalliness, as everywhere, fire rated sealant is only as good as the preparation behind it.
What your quote should include
- What happens if the job turns out different
- Whether VAT is included
- What preparation is included
- Whether the sealant suits the joint
Landlord and commercial work in Kalliness
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Different surfaces, different methods
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We work through the gaps on your assessment room by room.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each and we flag any that need another system.
What happens if it’s left?
Sealant isn’t the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we’ll tell you. Around Kalliness, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why us?
- Any old sealant cut out fully, not covered over
- Quality sealants from Arbo and Everbuild
- Homes, businesses and hotels
- Neat joints and a tidy finish
Read how sealant jobs are priced or our reviews.
Quotes for fire rated sealant in Kalliness
Jobs vary more than people expect. The main factors:
- How many areas need sealing
- Working hours on commercial sites
- Access and height
- Whether there’s mould to deal with
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What we need to know
You don’t need to know the technical terms. It helps if you can tell us:
- Any previous sealing or DIY work
- Whether it’s a home or a business
- Pictures of the joints, sent by email
- Where the property is
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Your questions about fire rated sealant in Kalliness
Will you come out to Kalliness?
Yes. Kalliness is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Do you cover Kalliness for fire rated sealant?
Yes. We work across all of Scotland, and Kalliness is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we will send you a clear quote.
Can you tell me which gaps need fire stopping?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
How do I get a quote for fire rated sealant in Kalliness?
Size, access and the old material all affect the cost. Ask us for a quote.
Is it OK to seal over old sealant?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
What should I tell you?
A short description and the location. We’ll ask anything else we need to know.
What fire rating will the seal have?
That isn’t something we state or certify. Your specification sets the requirement, and we apply a product tested for it with a record of each location.