Essex · England
Fire-rated sealant in Ingrave, Essex
We cover Ingrave for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly.
- Seals cut through by electricians, plumbers or data installers
- Open gaps behind door architraves
- Standard silicone or caulk in a fire-stopping gap
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Fire rated sealant for homes and businesses in Ingrave
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. We seal them with a product tested for that kind of gap. We work on pipe & cable gaps, service penetrations and linear gaps, and common reasons people get in touch are seals cut through by electricians, plumbers or data installers and open gaps behind door architraves.
For holiday lets, converted business premises or a community building near Ingrave, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Where
- Ingrave (CM13)
- Wider area
- Essex
- Guarantee
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Ingrave: your questions answered
Do you cover smaller places like Ingrave?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is Ingrave in your area for fire rated sealant?
Yes, Ingrave is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
What fire rating will the seal have?
We don’t issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
How much does fire rated sealant cost in Ingrave?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before any work starts.
Can you tell me which gaps need fire stopping?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
Can I use normal mastic around a pipe through a fire wall?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. We cut it out and reseal with a fire-rated product.
Can you fill the gap behind a fire door frame?
Yes. We seal the gap between the frame and the wall with a suitable fire-rated product. The door leaf and its hardware need a door specialist.
Can you match the sealant colour?
In most cases you can choose. We will explain which colours are available.
Commercial buildings in Ingrave
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
If you let a flat or house near Brentwood station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For site and facilities teams at buildings such as Brentwood County High School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Ingrave is about 2 miles south-east of Brentwood, in Essex. Anywhere in CM13, we can carry out fire rated sealant at your property. We cover 644 towns and villages across Essex. You can also see our page for Chelmsford, about 11 miles away.
Postcode districts we cover here for fire rated sealant: CM13. Streets in the area include Brentwood Road, School Lane and Meadows Close. Other places close to Ingrave include Hutton Mount (1 mile north), Hutton (2 miles north), Shenfield (2 miles north-west), Brentwood (2 miles north-west) and Havering's Grove (2 miles north-east). Further out, we also cover Chelmsford (11 miles north-east), Basildon (5 miles south-east), Harlow (15 miles north-west), Canvey Island (12 miles south-east), Billericay (4 miles north-east) and Rayleigh (11 miles east).
Landmarks near Ingrave
In Ingrave, that means homes and buildings near Green Man Inn, among other places. The nearest railway station is Brentwood station, about 1.9 miles west of the centre. Other landmarks nearby include Brentwood Community Hospital (1.8 miles north-west). The countryside around Ingrave includes Thorndon Park.
Nearby places to Ingrave
Other services in Ingrave
Surface by surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both from the manufacturer’s details.
Flats and HMOs
Working in occupied flats needs some planning. Access to flats and common areas is agreed in advance to keep disruption down.
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Flag any open gap you spot round a pipe or cable
- Never patch a fire seal with standard sealant
- Take photos of fire stopping before ceilings or boxing go back
- Look in service cupboards and ceiling voids from time to time
Don’t drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Honest limits
In fairness, there are a few things sealant won’t fix:
- Big openings where sealant alone is not the tested solution
- Sign-off of the building, which sits with building control or your assessor
- Fire doors that need new seals, closers or hardware
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.
Surfaces we seal
- Door frames
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Plasterboard & masonry
What we do, step by step
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Ingrave, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Let us know about parking restrictions
- Keep pets and children clear of the area while we work
- Clear items away from the joints we are working on
Getting a quote
Asking for a quote is easy: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we’ll take it from there.
Related advice
Why act early in Ingrave
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. Around Ingrave, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why Ingrave customers choose us
- An ARBOMaster approved applicator
- More than 20 years in sealant work
- Neat joints and a tidy finish
- Anti-fungal sanitary silicone in wet areas
Take a look at our cost guide and our reviews.
What we are called out for in Ingrave
In some buildings the gap was filled with the wrong thing in the first place: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It looks sealed, but it isn’t fire-rated.
Look out for these signs:
- Door frames with gaps between frame and wall
- New service routes left unsealed after building work
- Joints picked up in a fire-stopping survey
- Ordinary sealant used where a fire-rated product was needed
If you look after a church, hall or community building such as Church of St Nicholas, older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- What insurance they hold
- Is the old sealant removed completely?
- Which colour the sealant will be
- Who turns up on the day