Essex · England
External & façade joints in Ingrave, Essex
We cover Ingrave for sealing brickwork movement joints, render, cladding and façade joints. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Joints pointed up with cement by mistake
- Leaking joints around cladding and façade panels
- Moss and dirt in joints with no sealant left
When something else is needed
Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:
- Loose or hollow render, which needs re-rendering
- Adding movement joints to masonry that has none
- Structural movement, which needs a surveyor or engineer
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
Joints and surfaces we work on
- Joints between brick and frames
- Render & cladding joints
- Façade panels
- Copings & trims
- Brickwork movement joints
- Concrete & block
How we handle external mastic in Ingrave
Where two different materials meet, such as brick and render or blockwork and metal, they move at different rates. A flexible exterior sealant takes up that movement where mortar or filler would crack. If you have sealant pulling away from one side of the joint and failed sealant between panels on a façade, we can put it right, on render & cladding joints, copings & trims and brickwork movement joints alike.
In a village or hamlet like Ingrave, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Where
- Ingrave (CM13)
- Region
- Essex
- Cover
- One year on every job
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What happens on the day
Every visit runs the same way: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take a few hours for a handful of joints, longer for a whole elevation. In a small place like Ingrave, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We inspect the joints and agree which need resealing and how they’ll be reached.
- The old mastic and anything lodged in the joint is removed.
- The joint faces are cleaned and primed where the sealant needs it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- A flexible exterior sealant is applied and tooled in a colour to suit the wall.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
We quote each job on its own. Just ring 0345 464 0079 or drop us an email with the details and send pictures if you have them.
Advice
Common questions in Ingrave
Will you come out to Ingrave?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Brentwood station?
Yes. We work for landlords and letting agents as well as homeowners. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
How long does external mastic last?
It varies from wall to wall: joints on exposed walls or with a lot of movement age sooner. A yearly look will tell you when they need doing. Every job carries our one-year guarantee.
Can I add another job to the visit?
Yes. Just list everything you need and we’ll quote it together.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we are using.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Landlords, agents and businesses in Ingrave
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
For anyone letting property in or around Ingrave, several properties can go on one quote. Just tell us the addresses and what each one needs.
External mastic in Ingrave: local notes
Historic houses like Ingatestone Hall (about 4.5 miles north-east) are a reminder that the area around Ingrave has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Managing a site like Brentwood County High School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. If you live in an older home near Church of St Nicholas, old and new materials meet at the roofline and walls, which is where sealant earns its keep. If you let a flat or house near Brentwood station, outside joints that have cracked can let damp into a rental, so check them between lets.
Ingrave is about 2 miles south-east of Brentwood, in Essex. Whether you’re in the middle of Ingrave or further out, we cover external mastic for every kind of property, from flats and houses to offices and hotels. We cover 644 towns and villages across Essex, from the larger towns to small villages. For nearby work, see our Chelmsford page, about 11 miles away.
We cover every part of CM13 for external mastic. You will find streets such as Brentwood Road, School Lane and Meadows Close. Other places close to Ingrave include Hutton Mount (1 mile north), Hutton (2 miles north), Shenfield (2 miles north-west), Brentwood (2 miles north-west) and Havering's Grove (2 miles north-east). We also work in nearby towns such as Chelmsford (11 miles north-east), Basildon (5 miles south-east), Harlow (15 miles north-west), Canvey Island (12 miles south-east), Billericay (4 miles north-east) and Rayleigh (11 miles east).
Landmarks near Ingrave
Around Ingrave, our work takes us to homes and buildings near Green Man Inn. The closest station to Ingrave is Brentwood station, roughly 1.9 miles west of the centre. Well-known places in the area include Brentwood Community Hospital (1.8 miles north-west). The countryside around Ingrave includes Thorndon Park.
What affects the quote in Ingrave
Your quote is based on your job. We look at:
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- Whether there’s mould to deal with
- How easy the joints are to reach
Doing several joints on one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We will give you a clear quote for the lot.
Asking for a quote
To make quoting easier, let us know:
- The address or postcode of the job
- Photos by email, if that is easy
- Access, such as stairs, a lift or height
- If someone has resealed it before
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Why deal with it now?
Low-modulus sealants stretch easily, so they put less strain on the joint edges. That matters on brick, render and concrete, which can be weaker at the face. A stiffer product can damage the joint edge as it fails. Where a wall is exposed, as many are in small places like Ingrave, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Leaving a failed joint usually makes the job bigger, not smaller. If you are not sure whether it needs doing, call 0345 464 0079 or send us an email for an honest opinion and a quote.
Why us?
- Experience in homes, commercial sites and hotels
- We agree the colour with you first
- We’re fully insured
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced and what customers say.
Towns and villages near Ingrave
More services for Ingrave
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Do not let climbing plants root in the sealant
- Point out the joints to other trades
- Never let anyone fill a movement joint with mortar
- Wash walls gently around the sealant
Only paint over the joint if we’ve confirmed the sealant can take paint. Many exterior sealants are not designed to be painted.
Leave a failed movement joint and water keeps getting into the wall. That can lead to damp patches, staining and frost damage, all bigger jobs than a reseal.