Oxfordshire · England
Fire-rated sealant in Horley, Oxfordshire
Specialist fire rated sealant for Horley: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Joints picked up in a fire-stopping survey
- Door frames with gaps between frame and wall
- Gaps left after a refit or conversion
Honest limits
It helps to know what we can’t do too:
- Problems with the door itself rather than the gap around the frame
- Sign-off of the building, which sits with building control or your assessor
- Fire risk assessments, which need a qualified assessor
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Plasterboard & masonry
- Linear gaps
- Service penetrations
- Door frames
- Pipe & cable gaps
- Flats & HMOs
How we handle fire rated sealant in Horley
Door frame gaps, linear joints and holes around services all have their own details. Measuring the gap and checking what it’s made of comes first, then the sealant goes in to the depth the product’s details set. If you have new service routes left unsealed after building work and gaps filled with a product that isn’t fire-rated, we can help, on service penetrations, pipe & cable gaps and door frames alike.
Somewhere as small as Horley, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
There’s a 12-month guarantee on every job, whatever its size.
- Where
- Horley (OX15)
- Region
- Oxfordshire
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Service penetrations
New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth.
Door frames
Frame gaps are normally hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size.
Fire rated sealant in Horley: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Community buildings like Church of St Ethelreda are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Banbury station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Horley is about 3 miles north-west of Banbury, in Oxfordshire. Horley gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Across Oxfordshire, we cover 443 places, Horley among them. There’s also a page for Oxford, about 25 miles away.
Postcode districts we cover here for fire rated sealant: OX15. Streets in the area include Manor Orchard and Little Lane. Neighbouring places we cover for fire rated sealant include Wroxton (1 mile south), Drayton (2 miles south-east), Neithrop (3 miles south-east) and Ruscote (3 miles south-east). Further out, we also cover Banbury (3 miles south-east), Chipping Norton (12 miles south-west), Grimsbury (4 miles south-east), Bloxham (5 miles south), Bodicote (5 miles south-east) and Upper Heyford (13 miles south-east).
Landmarks near Horley
Around Horley, our work takes us to homes and buildings near Red Lion pub. For rail, the closest station is Banbury station, roughly 3.5 miles south-east. Nearby you will also find Horton General Hospital (3.6 miles south-east) and Castle Quay Shopping Centre (3.2 miles south-east). The countryside around Horley includes Crouch Hill.
More services for Horley
Horley questions
Do you cover smaller places like Horley?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do fire rated sealant in Horley?
Yes, Horley is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear price.
Is it OK to seal over old sealant?
No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
Do you have insurance?
Yes. We’re fully insured.
Is there a guarantee?
Yes, always. There’s a 12-month guarantee on every job.
Can I use normal mastic around a pipe through a fire wall?
No. It looks sealed but will not perform as fire stopping. A tested fire-rated product is needed and we can apply it for you.
What fire rating will the seal have?
We do not issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer; we install to those details and record what we did.
Landlord and commercial work in Horley
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
What happens on the day
On the day, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. In a small place like Horley, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Getting ready for the visit
- Tell us about any water getting in
- Let us know about parking restrictions
- Tell us about any previous sealing or DIY attempts
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Advice
Do you need fire rated sealant in Horley?
Much fire stopping is hidden: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
Keep an eye out for any of the following:
- Holes left by a change of layout
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
- Fire seals that have cracked with movement
For site and facilities teams at buildings such as North Oxfordshire Academy, service openings in fire-resisting walls need checking after any refurbishment.
What your quote should include
- What the quote includes, VAT included or not
- Whether the sealant suits the joint
- Which colour the sealant will be
- Who turns up on the day
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Photograph sealed gaps before they’re covered up
- Flag any open gap you spot round a pipe or cable
- Make resealing part of every contractor’s brief
Any fire seal that is cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.