East Sussex · England
Fire Rated Sealant in Hollingrove
Fire rated sealant for Hollingrove, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
- Open holes round services passing through fire walls
Workplaces and buildings in Hollingrove
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as The Parish Church of St Thomas A Becket, older buildings that have had new heating or wiring often have service gaps worth checking.
Hollingrove is about 8 miles north of Bexhill-on-Sea, in East Sussex. Anywhere in TN32, our applicators can take on fire rated sealant. Our area takes in 289 places across East Sussex. We also work in Brighton, around 25 miles away.
Every address in TN32 is within our area for fire rated sealant. If you need fire rated sealant at a property on Hollingrove Road and Kent Lane or anywhere close by, our applicators can take on the job. Neighbouring places we cover for fire rated sealant include Brightling (1 mile west), Oxley's Green (1 mile north), Twelve Oaks (1 mile south-west), Netherfield (2 miles south-east) and Penhurst (3 miles south). Further out, we also cover Eastbourne (13 miles south-west), Hastings (9 miles south-east), Bexhill-on-Sea (8 miles south), Hailsham (10 miles south-west), Crowborough (12 miles north-west) and St Leonards (10 miles south-east).
What’s near Hollingrove
Hollingrove’s nearest station is Robertsbridge station, roughly 3.1 miles north-east of the centre. A little further out are Old Castle (2.6 miles south-west) and Ticehurst House Hospital (6 miles north). The countryside around Hollingrove includes Senlac Hill.
Fire rated sealant in Hollingrove, done properly
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. We work on door frames, linear gaps and flats & HMOs, and the jobs we see most are open joints along the top of partitions and standard silicone or caulk in a fire-stopping gap.
For a small place like Hollingrove, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Hollingrove (TN32)
- Wider area
- East Sussex
- Cover
- One year on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What happens if it’s left?
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. Where a wall is exposed, as many are in small places like Hollingrove, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why choose Mr Mastic in Hollingrove
- Approved under the ARBOMaster scheme
- Tidy, careful work
- 20+ years of sealant experience
- We never seal over old sealant
Read what affects the cost and what customers say.
How the job changes by surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. The sealant is chosen for what passes through and how wide the gap is.
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before the sealant goes in.
When something else is needed
New sealant can’t fix everything, and we’d rather say so up front. It won’t solve:
- Deciding what fire stopping a building needs
- A wall that is not a fire-resisting element to begin with
- Big openings where sealant alone is not the tested solution
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.
Where we work in Hollingrove
- Door frames
- Linear gaps
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
- Plasterboard & masonry
Common problems we fix in Hollingrove
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
If you can see any of these, it’s time to have the joints looked at:
- Gaps filled with a product that isn’t fire-rated
- Holes left by a change of layout
- Fire stopping disturbed by later work
- Gaps around pipes and cables through fire-resisting walls
Letting a property close to Robertsbridge station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What your quote should include
- Whether the sealant suits the joint
- When the joint can take water or movement
- How hidden problems are handled
- Who turns up on the day
Nearby places to Hollingrove
More services for Hollingrove
How we quote for fire rated sealant
For a quick quote, just ask. What matters most is:
- Any mould that needs treating
- The amount of work
- Working hours on commercial sites
- How easy the joints are to reach
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, ring 0345 464 0079 or drop us an email for an honest opinion and a quote.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- Whether it has been sealed before
- If it’s domestic, commercial or a hotel
- Where the property is
- The rough size of the job
For fire rated sealant in Hollingrove, phone 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Landlords, agents and businesses in Hollingrove
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
If you manage several properties in or around Hollingrove, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Hollingrove: your questions answered
Is Hollingrove in your area for fire rated sealant?
Yes, Hollingrove is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job.
Can you help a landlord with a rental near Robertsbridge station?
Yes. We work for letting agents and landlords as well as householders, and several properties can be quoted together. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
How long does the job take?
A typical job takes from a few hours to a few days, depending on the number of gaps and the access, including the preparation. We’ll confirm how long when we quote.
What information do you need?
Only a few details: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or email us.
Do you guarantee your work?
Yes. All our work carries a one-year guarantee.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent ones swell in heat, and they’re one of the options. We use whichever the specification and tested details call for.
Is it OK to seal over old sealant?
No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in so it’s there for the next inspection.
How it works
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on the size of the job. For a village or hamlet like Hollingrove, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your files.
Before we arrive
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
- Mention any tricky access
Ask for a quote
Asking for a quote is easy: let us know what needs doing and where. A few pictures by email make the job easier to understand, and we will take it from there.