Kent · England
Fire Rated Sealant in Henley Street
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Henley Street and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Ordinary sealant used where a fire-rated product was needed
- Open holes round services passing through fire walls
- Cracked or shrunken fire-rated sealant
Fire rated sealant in Henley Street, done properly
Intumescent sealant looks much like any other sealant until it gets hot; then it swells to help close the gap. The right product depends on the gap size, the substrate and what passes through, so we follow the tested detail for each one. We work on plasterboard & masonry, flats & HMOs and service penetrations, and the jobs we see most are door frames with gaps between frame and wall and new service routes left unsealed after building work.
Somewhere as small as Henley Street, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
Our work is backed for twelve months.
- Location
- Henley Street (DA13)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What fire rated sealant looks like in Henley Street
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Parish Church of St Peter and St Paul are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. Managing a site like Cobham Primary School? Then fire-stopping around service openings should be restored whenever new services go in.
Henley Street is about 4 miles south of Gravesend, in Kent. Anywhere in DA13, we cover fire rated sealant for homes and businesses. Our area takes in 922 places across Kent, large and small. London is on our list too, around 23 miles away.
Here we cover the DA13 postcode area for fire rated sealant. If you’re just outside Henley Street, we cover Luddesdown (1 mile south), Gold Street (1 mile north-west), Sole Street (1 mile north-west), Round Street (1 mile north-west) and Foxendown (1 mile south-west). Larger places within reach include Maidstone (10 miles south-east), Sittingbourne (15 miles east), Dartford (9 miles north-west), Sevenoaks (11 miles south-west), Gravesend (4 miles north) and Tonbridge (13 miles south).
Local landmarks in Henley Street
Typical jobs here are in homes near Camer Park Country Park, Meopham School and The Cock pub and the streets around them. The nearest railway station is Sole Street station, about 0.8 miles north-west of the centre. Other landmarks nearby include Gravesham Community Hospital (4.7 miles north) and Rochester Castle (4.6 miles east). Green spaces nearby include Ranscombe Farm and Gad's Hill.
Why act early in Henley Street
Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, so we follow the maker’s details on every gap. Where a wall is exposed, as many are in small places like Henley Street, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Why us?
- We leave the area clean and tidy
- We never seal over old sealant
- Rated 4.9 stars on Google
- A 12-month guarantee on all work
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Henley Street questions
Do you cover smaller places like Henley Street?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is Henley Street in your area for fire rated sealant?
Yes, Henley Street is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or send us an email and tell us what needs doing.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
How long does fire rated sealant take?
That depends on how much there is to do, but most jobs take anything from a few hours to several days, depending on how many gaps there are. We will give you a better idea when we quote.
Can you fill the gap behind a fire door frame?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame, and we will mention anything we notice about the door.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- How many rooms, windows or areas are involved
- The product the joint needs
- The old material and how stubborn it is
- Whether the work is at height
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we will go through it with you.
Helping us quote
When you contact us, it’s useful to know:
- The type of property
- Roughly how big the job is
- How we’d reach the joints
- If someone has resealed it before
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, ring 0345 464 0079 or send us an email.
When it isn’t the sealant
In fairness, some problems need a different trade:
- Certifying a building or signing off its fire safety
- Big openings where sealant alone is not the tested solution
- Walls or floors that weren’t built to resist fire
If you are not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Surfaces we seal
- Linear gaps
- Flats & HMOs
- Service penetrations
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
Places near Henley Street
Other services in Henley Street
Common problems we fix in Henley Street
Buildings are refitted and reconfigured over the years. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
The most common problems we see are:
- Unsealed gaps around fire door frames
- Damaged fire sealant left by other trades
- Unsealed gaps where pipes and cables go through a wall
- Gaps filled with a product that is not fire-rated
Rented homes near Sole Street station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Before booking anyone
- How long the guarantee is
- How the colour is chosen
- Are they insured?
- Who turns up on the day
The process
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes from a few hours to a few days, depending on the number of gaps and the access. In a small place like Henley Street, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Mention any leaks or damp you’ve noticed
- Clear items away from the joints we’re working on
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Just phone 0345 464 0079 or send us an email with the details and send pictures if you have them.
Read more
What the job involves on each surface
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Masonry and concrete
Masonry is dusty and porous, so preparation matters. The gap is cleaned and backed where required.