Oxfordshire · England
Fire Rated Sealant in Fulbrook
Professional fire rated sealant in and around Fulbrook, with every bit of old sealant taken out first and a 12-month guarantee.
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps where pipes and cables go through a wall
- Cracked or shrunken fire-rated sealant
What sealant work cannot fix
It helps to know what we cannot do:
- Doors that aren’t fire doors in the first place
- Big openings where sealant alone is not the tested solution
- Deciding what fire stopping a building needs
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before booking.
What we seal
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
- Linear gaps
Fire rated sealant in Fulbrook
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That is the part we focus on, gap by gap. We are often asked to deal with gaps around pipes and cables through fire-resisting walls and new service routes left unsealed after building work, across plasterboard & masonry, linear gaps and door frames.
Work in a small place like Fulbrook is planned ahead, journey included, so it can be fitted around guests, customers or events where possible.
There’s a 12-month guarantee on every job.
- Location
- Fulbrook (OX18)
- Region
- Oxfordshire
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Do you need fire rated sealant in Fulbrook?
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
The problems people usually mention when they call are:
- Door frames with gaps between frame and wall
- Old fire sealant that has split or come away
- Open joints along the top of partitions
- Open holes round services passing through fire walls
For site and facilities teams at buildings such as Burford Primary School, fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- What guarantee comes with the work
- How long to leave it before use
- Which sealant they’ll use, and why
- What happens if they find a problem under the old sealant
Places near Fulbrook
Also in Fulbrook
How we quote for fire rated sealant
Call for a quick quote. The main things that affect it are:
- The type of sealant required
- Whether old sealant or filler has to be cut out
- When we can work, for business premises
- Whether the work is at height
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- If it’s domestic, commercial or a hotel
- What the problem is, such as mould, gaps, leaks or cracking
- The address or postcode of the job
- Access, such as stairs, a lift or height
We don’t publish a price list. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or drop us an email.
Workplaces and buildings in Fulbrook
Fulbrook has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
For landlords with property near Shipton station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. For buildings such as Church of Saint James the Great, gaps around pipes and cables are worth checking after any building work there.
Fulbrook is about 4 miles north-west of Carterton, in Oxfordshire. If you need fire rated sealant in Fulbrook, please ring 0345 464 0079 or send us an email for a quick quote. We cover Oxfordshire from our Crawley base, Fulbrook included. Across Oxfordshire, we cover 443 places, and Fulbrook is one of them. We also work in Oxford, about 17 miles from Fulbrook.
Our applicators cover all of OX18 for fire rated sealant and the streets around it. We cover properties on Church Lane, Meadow Lane and Upper End. Neighbouring places we cover for fire rated sealant include Burford (1 mile south-west), Little Barrington (3 miles west), Milton-under-Wychwood (3 miles north), Fifield (4 miles north) and Idbury (5 miles north). Larger places within reach include Witney (6 miles east), Carterton (4 miles south-east), Faringdon (11 miles south), Kidlington (15 miles east), Chipping Norton (9 miles north) and Woodstock (12 miles east).
Landmarks near Fulbrook
Typical jobs here are in homes near The Cotswold Arms Inn and Burford School, among other places. The closest station to Fulbrook is Shipton station, roughly 3.8 miles north.
How to look after the new joints
To keep the joints looking good and working properly:
- Make resealing part of every contractor’s brief
- Keep the record of products and locations with your fire safety documents
- Keep photos of seals that will be hidden
- Check whether a sealant can be painted before decorating over it
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Get it sealed and recorded so you can show it was dealt with.
Surface by surface
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist.
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before any work starts to keep disruption down.
The process
You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes anything from a few hours to several days, depending on how many gaps there are in most cases. In a small place like Fulbrook, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Mention any parking rules near the property
- Clear the area around the work
- Plan for the work area to be out of bounds to pets and children
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Simply ring 0345 464 0079 or drop us an email and describe the job.
Read more
Questions from Fulbrook
Do you take on hotel work around Fulbrook?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is Fulbrook within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Can I use normal mastic around a pipe through a fire wall?
No. Standard sealants aren’t made or tested to stop fire. If it’s been used, we remove it and use the right product.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in, so you have it on file.
Can tenants book the work?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
What does fire rated sealant cost?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Do you have insurance?
Yes, we are fully insured for every job we do.
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.