Essex · England
Fire Rated Sealant in Ford End
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Ford End and across Essex. Fully insured, ARBOMaster approved and guaranteed for a year.
- New service routes left unsealed after building work
- Fire stopping disturbed by later work
- Open gaps behind door architraves
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Fire rated sealant in Ford End
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. Common call-outs are for fire stopping disturbed by later work and holes left by a change of layout, across door frames, pipe & cable gaps and plasterboard & masonry.
If you have holiday lets, a converted barn used for business or a community building near Ford End, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Ford End (CM3)
- Region
- Essex
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
FAQs for Ford End
What guarantee comes with fire rated sealant in Ford End?
All our work, in Ford End and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Do you cover Ford End for fire rated sealant?
Yes, Ford End is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we’ll give you a clear quote.
Do you seal gaps around fire door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself, and we’ll mention anything we notice about the door.
Is there any odour?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Are you fully insured?
Yes, we’re fully insured for domestic and commercial work.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What the job involves on each surface
Flats and HMOs
Working in occupied flats needs some planning. Access to flats and common areas is agreed in advance.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We seal them along their full length.
Fire rated sealant around Ford End
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Community buildings like Church of St John the Evangelist are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Ford End is about 6 miles north of Chelmsford, in Essex. Whether you are in the middle of Ford End or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Across Essex, we cover 644 places, and Ford End is one of them. Chelmsford is on our list too, about 6 miles from Ford End.
Every address in CM3 is covered for fire rated sealant. You’ll find streets such as Woods Road, Pleshey Road and White Barns. Being close to the B1008, Ford End is simple for us to get to. Close by, we work in Hartford End (1 mile north-east), North End (1 mile north-west), Pleshey (2 miles south-west), Causeway End (2 miles north) and Howe Street (2 miles south-east). Further out, we also cover Chelmsford (6 miles south), Braintree (7 miles north-east), Harlow (14 miles west), Brentwood (15 miles south), Maldon (13 miles south-east) and Billericay (14 miles south).
Around Ford End
Locally, jobs take us to homes and businesses close to The Butchers Arms Public House and the streets around them. Other landmarks nearby include Broomfield Hospital (3.8 miles south-east). For a walk, there’s Phyllis Currie Nature Reserve.
How to look after the new joints
After the cure time, these simple habits help:
- Make resealing part of every contractor’s brief
- File the fire-stopping record where your assessor can find it
- Ask which product was used before you paint
- Never patch a fire seal with standard sealant
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
What affects the quote in Ford End
Jobs vary more than people expect. The main factors:
- How many rooms, windows or areas are involved
- Any working-time requirements on site
- How much old sealant there is and how hard it is to remove
- The type of sealant required
Combining jobs into one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Access, such as stairs, a lift or height
- Whether it has been sealed before
- How many joints, rooms or windows are involved
- Where the property is
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
When to call us in Ford End
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
Most people get in touch after spotting something like this:
- Old fire sealant that has split or come away
- Linear gaps at the head of walls
- Ordinary sealant used where a fire-rated product was needed
- Gaps around pipes and cables through fire-resisting walls
If you look after a building such as Ford End Church of England Primary School, service openings in fire-resisting walls need checking after any refurbishment.
What your quote should include
- What guarantee comes with the work
- What happens if they find a problem under the old sealant
- What the cure time is
- How much experience the applicator has
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Doors that are not fire doors in the first place
- Issuing a fire rating or certificate for a building
- Openings too large for sealant, which need batts, boards or another system
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly before you book.
Surfaces we seal
- Linear gaps
- Flats & HMOs
- Service penetrations
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
How the visit works
Before we leave, we go over the finished joints with you. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on the size of the job. Somewhere as small as Ford End, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Mention any tricky access
- Try not to wet indoor joints just before the visit
- Mention any parking rules near the property
Getting a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.