East Sussex · England

Fire-rated sealant in Etchingwood, East Sussex

Intumescent and fire-rated sealant around gaps, frames and service penetrations in Etchingwood, with a 12-month guarantee on every job. Call for a quick quote.

  • Damaged fire sealant left by other trades
  • Unsealed gaps around fire door frames
  • Standard silicone or caulk in a fire-stopping gap

Fire rated sealant for Etchingwood homes and businesses

Why deal with it now?

A quick fill with any sealant to hand isn’t fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, which is why we match the product and the method to each gap. Where a wall is exposed, as many are in small places like Etchingwood, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.

Why Etchingwood clients choose us

  • 4.9 on Google from 180+ five-star reviews
  • Quality sealants from Arbo and Everbuild
  • Any old sealant cut out fully, not covered over
  • Every job guaranteed for a year

Read our cost guide or what customers say.

Fire rated sealant for homes and businesses in Etchingwood

Deciding which gaps need fire stopping isn’t our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We work on linear gaps, pipe & cable gaps and plasterboard & masonry, and people most often call us about cracked or shrunken fire-rated sealant and fire stopping disturbed by later work.

In a village or hamlet like Etchingwood, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.

All of our work is guaranteed for twelve months, in Etchingwood and everywhere else we cover.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Location
Etchingwood (TN22)
Wider area
East Sussex
Guarantee
A year, on every job
Quote
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026

Common questions in Etchingwood

Do you work for landlords with property near Buxted station?

Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.

Is Etchingwood in your area for fire rated sealant?

Yes. Our work covers London and the South East, and Etchingwood is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.

Where is Mr Mastic based?

We work from Crawley. We cover Etchingwood and the rest of East Sussex, along with the rest of our area.

Is the work guaranteed?

Yes. All our work carries a 12-month guarantee.

Can you give us a record of the work?

Yes. We note each location and the product that went in.

What sealant do you use?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.

Are you insured?

Yes. We are fully insured.

Will the old sealant be removed?

Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.

Landlords, agents and businesses in Etchingwood

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.

We work for landlords and letting agents as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.

Aftercare tips

Simple care keeps the joints in good condition. Our advice:

  • Do not paint over fire sealant until it has cured
  • Flag any open gap you spot round a pipe or cable
  • Tell trades working in the building that fire seals must be put back
  • Keep photos of seals that will be hidden

Any fire seal that is cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.

Open gaps don’t only matter in a fire: noise, draughts and even pests can come through too. Sealing them early helps on every front.

Commercial buildings in Etchingwood

In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

For buildings such as Church of St Mary the Virgin, service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Buxted station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.

Etchingwood is about 2 miles north-east of Uckfield, in East Sussex. Wherever you are in the TN22 postcode area, our applicators can take on fire rated sealant. Etchingwood is one of 289 towns and villages in East Sussex where we work. For nearby work, see our Brighton page, about 16 miles away.

Postcode districts we cover here for fire rated sealant: TN22. We also cover Potter's Green (1 mile north-west), Buxted (1 mile north-west), Framfield (1 mile south-west), Blackboys (1 mile south-east) and Hadlow Down (2 miles north-east). Larger places within reach include Eastbourne (15 miles south-east), Seaford (14 miles south), Lewes (10 miles south-west), Hailsham (9 miles south-east), Crowborough (5 miles north) and Newhaven (14 miles south).

Local landmarks in Etchingwood

Typical jobs here are in homes near The Buxted Inn and the streets around them. The nearest railway station is Buxted station, roughly 0.9 miles north-west of the centre. Well-known places in the area include Uckfield Community Hospital (2.2 miles south-west) and Tickerage Castle (0.9 miles south). For a walk, there’s Selwyns Wood.

Map of Etchingwood © OpenStreetMap contributors

How it works

Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Etchingwood, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We go through the gaps on your list or survey and check each one’s size and substrate.
  2. We remove any old or unsuitable filler and clean the gap.
  3. Backing or fill is fitted where the product’s tested detail calls for it.
  4. We apply the fire-rated or intumescent sealant to the specified depth and tool it.
  5. Finally, we list where we worked and what we used, for your records.

Getting ready for the visit

  • Let us know about parking restrictions
  • Move anything stored near the joints
  • On commercial sites, let us know about site rules

Ask for a quote

Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.

Ask for a quote

Related advice

Quotes for fire rated sealant in Etchingwood

The quote reflects the job in front of us. We take into account:

  • How many rooms, windows or areas are involved
  • When we can work, for business premises
  • How easy the joints are to reach
  • The product the joint needs

No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.

Helping us quote

Before you ask for a quote, have a think about:

  • Access, such as stairs, a lift or height
  • If someone has resealed it before
  • If it’s domestic, commercial or a hotel
  • Photos by email, if that is easy

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, call 0345 464 0079 or send us an email.

Signs you need fire rated sealant in Etchingwood

A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.

Common reasons people contact us include:

  • Damaged fire sealant left by other trades
  • Old fire sealant that has split or come away
  • Door frames with gaps between frame and wall
  • Sealant items on a fire risk assessment action list

Managing a site like Uckfield College? Then fire-stopping around service openings should be restored whenever new services go in.

What to look for in a quote

  • What product goes in the joint
  • What happens if the job turns out different
  • Is the old sealant removed completely?
  • Are they insured?

10 questions to ask before booking

What sealant work can’t fix

New sealant cannot fix everything, and we will tell you before work begins. Sealant won’t put right:

  • Large holes that need a different fire-stopping system
  • Assessing a building’s fire safety
  • Issuing a fire rating or certificate for a building

Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly before booking.

Joints and surfaces we work on

  • Pipe & cable gaps
  • Flats & HMOs
  • Service penetrations
  • Linear gaps
  • Door frames
  • Plasterboard & masonry
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job