Oxfordshire · England
Fire-rated sealant in Edgehill, Oxfordshire
Problem with your fire-stopping gaps in Edgehill? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Gaps filled with a product that is not fire-rated
- Open joints along the top of partitions
- Unsealed gaps where pipes and cables go through a wall
Fire rated sealant in Edgehill
Intumescent sealant looks much like any other sealant until it gets hot; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it, so we work to the manufacturer’s details. We work on service penetrations, plasterboard & masonry and flats & HMOs, and people most often call us about gaps where walls meet ceilings or slabs and sealant items on a fire risk assessment action list.
For a small place like Edgehill, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
Your job is guaranteed for a year, as with all our work.
- Location
- Edgehill (OX15, CV35)
- Wider area
- Oxfordshire
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Questions from Edgehill
Is Edgehill in your area for fire rated sealant?
Yes, Edgehill is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or send us an email and let us know what needs doing.
Will you come out to Edgehill?
Yes, Edgehill is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you certify the fire stopping?
We do not give ratings or certificates for our work. Your specification sets the requirement, and we apply a product tested for it with a record of each location.
Do you do fire sealant around door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself, and we will mention anything we notice about the door.
Can ordinary silicone be used in a fire-stopping gap?
No. It looks sealed but won’t perform as fire stopping. Use a product tested for that gap and service, or ask us to do it.
Where is Mr Mastic based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Can you do several jobs on one visit?
Yes. Just list everything you need and you’ll get one quote.
Can you work in occupied buildings?
Yes. Occupied flats, HMOs, offices and schools are all fine and we plan access around the people using them. Out-of-hours work can be arranged.
Different surfaces, different methods
Flats and HMOs
In occupied buildings, we plan the order of work with you. Access to flats and common areas is agreed in advance to keep disruption down.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the seal has something sound to bond to.
How the visit works
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It normally takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Edgehill, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
How to prepare
- Keep children and pets away from the work area
- On commercial sites, let us know about site rules
- Mention any parking rules near the property
Getting a quote
We quote each job on its own, so the first step is telling us about yours. Just ring 0345 464 0079 or send us an email with the details and send photos if you have them.
Read more
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Big openings where sealant alone is not the tested solution
- Fire doors that need new seals, closers or hardware
- Construction that does not provide fire resistance on its own
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Door frames
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Workplaces and buildings in Edgehill
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
In and around Edgehill, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint. If you look after a church, hall or community building such as Church of St Peter, service openings in its walls need the right fire-rated sealant, as in any building.
Edgehill is about 6 miles north-west of Banbury, in Oxfordshire. Jobs in Edgehill get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 443 towns and villages across Oxfordshire, large and small. Our Oxford page covers work nearby.
Jobs for fire rated sealant in OX15 and CV35 works the same way as everywhere else we cover. If you’re just outside Edgehill, we cover Ratley (1 mile east), Sun Rising (1 mile south-west) and Hornton (2 miles south-east). Further out, we also cover Banbury (6 miles south-east), Chipping Norton (13 miles south), Neithrop (6 miles south-east), Grimsbury (7 miles south-east), Ruscote (6 miles south-east) and Bloxham (8 miles south-east).
Near you in Edgehill
Locally, jobs take us to homes and businesses close to Castle at Edgehill pub and the streets around them. Nearby you will also find W. O. Bentley Memorial Foundation (3.5 miles south-east) and King John's Castle (3.5 miles north-west). Open spaces near Edgehill include Edge Hill.
Also near Edgehill
What else we do in Edgehill
Quotes for fire rated sealant in Edgehill
We quote each job individually. This is what makes a difference:
- The product the joint needs
- How much old sealant there is and how hard it is to remove
- Whether there’s mould to deal with
- The number and length of the joints
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or send us an email and we’ll talk you through it.
Helping us quote
There’s no need for technical detail. Just tell us:
- A few pictures by email, if you can
- The type of property
- Roughly how big the job is
- Where the property is
Want a quote for fire rated sealant? Please ring 0345 464 0079 or email us and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Tell trades working in the building that fire seals must be put back
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Do not paint over fire sealant until it has cured
- Keep the record of products and locations with your fire safety documents
Any fire seal that is cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.