Hertfordshire · England
Driver's End Fire Rated Sealant
Specialist fire rated sealant for Driver's End: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Standard silicone or caulk in a fire-stopping gap
- Cracked or shrunken fire-rated sealant
- Damaged fire sealant left by other trades
Fire rated sealant in Driver's End
We often work from an action list drawn up by a fire risk assessor for buildings in Driver's End. If you share the list, we can quote for the gaps that need fire-rated sealant. Typical jobs include ordinary sealant used where a fire-rated product was needed and open gaps behind door architraves, on service penetrations, flats & HMOs and door frames.
For a small place like Driver's End, the journey and timings are agreed in advance, so it can be fitted around guests, customers or events where possible.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Driver's End (SG4)
- Region
- Hertfordshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Plan fire stopping into any work that goes through walls or floors
- Check risers, ceiling voids and cupboards during building checks
- Ask which product was used before you paint
- Tell trades working in the building that fire seals must be put back
Any fire seal that is cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the job gets bigger.
Fire rated sealant around Driver's End
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
For landlords with property near Knebworth station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like Parish Church of St Giles are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Driver's End is about 4 miles south-west of Stevenage, in Hertfordshire. Whether you are in the middle of Driver's End or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Across Hertfordshire, we cover 381 places, Driver's End among them. London is on our list too, about 26 miles from Driver's End.
Work in SG4 is quoted and booked the same way as anywhere else. We also cover the places around Driver's End: Nup End Green (1 mile east), Old Knebworth (1 mile north-east), Codicote (1 mile south), Rableyheath (1 mile south-east) and Codicote Bottom (1 mile south-west). Larger places within reach include Hemel Hempstead (13 miles south-west), Stevenage (4 miles north-east), St Albans (9 miles south-west), Welwyn Garden City (5 miles south), Harpenden (6 miles south-west) and Hitchin (6 miles north).
Around Driver's End
Locally, jobs take us to homes and businesses close to Knebworth Park, among other places. For rail, the closest station is Knebworth station, about 1.8 miles east. Nearby you’ll also find Stevenage Museum (2.9 miles north-east) and Lister Hospital (4.2 miles north). Not far away are Mardley Heath.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
FAQs for Driver's End
Will you come out to Driver's End?
Yes, Driver's End is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do fire rated sealant in Driver's End?
Yes, Driver's End is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we will give you a clear price.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Can ordinary silicone be used in a fire-stopping gap?
No. It might close the gap, but it isn’t a fire-rated seal. A tested fire-rated product is needed, or ask us to do it.
Do you seal gaps around fire door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself and we’ll tell you if we spot problems with the door.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated to help seal the gap. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
Where are you based?
We work from Crawley. Our applicators cover Driver's End.
Also near Driver's End
Also in Driver's End
Why act early in Driver's End
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job. Where a wall is exposed, as many are in small places like Driver's End, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Why us?
- 180+ five-star Google reviews
- An ARBOMaster approved applicator
- Fully insured
- Sanitary silicone with an anti-fungal additive in wet areas
Take a look at how sealant jobs are priced and what customers say.
Common problems we fix in Driver's End
Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole they leave doesn’t always get resealed.
Signs it’s time to call us include:
- Fire stopping disturbed by later work
- Open gaps behind door architraves
- Gaps flagged on a fire risk assessment
- Old fire sealant that has split or come away
Managing a site like Codicote Church of England Primary School? Then service openings in fire-resisting walls need checking after any refurbishment.
Before you book anyone
- Which sealant they’ll use, and why
- How hidden problems are handled
- How the joint is cleaned and prepared
- How much experience the applicator has
How we quote for fire rated sealant
The price is agreed before any work begins. It takes into account:
- Access and height
- Whether there’s mould to deal with
- Any working-time requirements on site
- Which sealant suits the joint
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Call for a quick quote and we will go through it with you.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- How we’d reach the joints
- Pictures of the joints, sent by email
- The problem you’ve noticed
- Where the property is
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
The process
We keep the work tidy and contained to the joints we’re treating. The job usually takes from a few hours to a few days, depending on the number of gaps and the access, and we tell you how long to leave it before we go. For a village or hamlet like Driver's End, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Tell us if parking is tricky
- Tell us about access, such as stairs, a lift or high-level joints
- Try not to wet indoor joints just before the visit
How to get a quote
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or drop us an email.
Advice
What we cannot put right
Before booking, it’s worth knowing the limits:
- Fire risk assessments, which need a qualified assessor
- A wall that is not a fire-resisting element to begin with
- Problems with the door itself rather than the gap around the frame
If in doubt, call 0345 464 0079 or email us and we will say what we think before you book.
Surfaces we seal
- Plasterboard & masonry
- Flats & HMOs
- Linear gaps
- Pipe & cable gaps
- Service penetrations
- Door frames