Hampshire · England
Fire-rated sealant in Cufaude, Hampshire
Specialist fire rated sealant for Cufaude: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Open gaps behind door architraves
- Fire stopping disturbed by later work
- Gaps where walls meet ceilings or slabs
How it works
On the day, we start by going over the job with you, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. The work normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Cufaude needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
How to prepare
- Tell us if parking is tricky
- Mention if the joints have been sealed before
- Clear the area around the work
Get a quote
Getting a quote is simple: let us know the job and the location and its rough size. A few photos by email make the job easier to understand.
Read more
How we handle fire rated sealant in Cufaude
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it, so we follow the tested detail for each one. If you have unsealed gaps where pipes and cables go through a wall and damaged fire sealant left by other trades, we can help, on door frames, pipe & cable gaps and flats & HMOs alike.
Somewhere as small as Cufaude, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Big or small, it’s backed by our one-year guarantee in Cufaude and across Hampshire.
- Location
- Cufaude (RG26)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026

Towns and villages near Cufaude
More services for Cufaude
Why deal with it now?
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up gives you evidence that the item was dealt with. Around Cufaude, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why us?
- Any old sealant cut out fully, not covered over
- Sanitary silicone with an anti-fungal additive in wet areas
- We leave the area clean and tidy
- A 12-month guarantee on all work
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Tell trades working in the building that fire seals must be put back
- Take pictures of fire stopping before ceilings or boxing go back
- Never patch a fire seal with standard sealant
- Include hidden areas like risers in routine checks
Avoid covering a sealed gap with anything that isn’t part of the tested detail. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record so you can show it was dealt with.
What fire rated sealant looks like in Cufaude
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Schools such as Bramley Church of England Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment. Community buildings like The Vyne Chapel are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. If you let a flat or house near Bramley (Hants) station, any gap left by new services in shared walls should be closed with a fire-rated product.
Cufaude is about 4 miles north-east of Basingstoke, in Hampshire. Anywhere in RG26, we can carry out fire rated sealant at your property. Cufaude is one of 683 places in Hampshire where we work for fire rated sealant. Reading is on our list too, around 10 miles away.
Postcode districts we cover here for fire rated sealant: RG26. Neighbouring places we cover for fire rated sealant include Bramley (1 mile north), Bramley Green (1 mile north-east), Church End (2 miles east), Sherfield on Loddon (2 miles east) and Three Ashes (2 miles north). Larger places within reach include Basingstoke (4 miles south-west), Farnborough (13 miles east), Fleet (10 miles east), Aldershot (14 miles east), Alton (12 miles south) and Yateley (10 miles east).
Landmarks near Cufaude
We work in homes and buildings around Everest Community Academy. The nearest railway station is Bramley (Hants) station, about 1.3 miles north of the centre. Nearby you will also find Basing House (3.1 miles south) and Basingstoke and North Hampshire Hospital (2.9 miles south-west). The countryside around Cufaude includes Daneshill Park Woods.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Cufaude questions
Is Cufaude in your area for fire rated sealant?
Yes, Cufaude is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.
Will you come out to Cufaude?
Yes, Cufaude is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Which products do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
Do you carry out fire risk assessments?
No. That’s for a fire risk assessor, designer or building control. We apply fire-rated sealant to the requirements they set.
Can I choose the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we’ll agree it with you first.
Can you work in occupied buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use, with access planned around residents or staff. Early starts or out-of-hours work can be arranged where it’s needed.
How much does fire rated sealant cost in Cufaude?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before we start.
Where do you work from?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Work for landlords, hotels and businesses
If you manage several properties in or around Cufaude, several properties can go on one quote. Send us the addresses and the work at each.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
When something else is needed
We will not take on work that won’t last, so these are the limits:
- Assessing a building’s fire safety
- Fire doors that need new seals, closers or hardware
- Issuing a fire rating or certificate for a building
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Joints and surfaces we work on
- Flats & HMOs
- Linear gaps
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Door frames
What affects the quote in Cufaude
Every job gets its own quote. This is what makes a difference:
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- Any working-time requirements on site
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we will explain what it covers.
Asking for a quote
To make quoting easier, let us know:
- Whether it has been sealed before
- Photos by email, if that’s easy
- Whether it’s a home or a business
- The rough size of the job
Want a quote for fire rated sealant? Please phone 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and send you a clear quote before we start.
