Oxfordshire · England

Fire Rated Sealant in Combe

Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Combe and across Oxfordshire. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.

  • Holes left by a change of layout
  • Ordinary sealant used where a fire-rated product was needed
  • Joints picked up in a fire-stopping survey

Trusted fire rated sealant in Combe

Fire rated sealant for homes and businesses in Combe

We often work from an action list drawn up by a fire risk assessor. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. Typical jobs include old fire sealant that has split or come away and linear gaps at the head of walls, across plasterboard & masonry, linear gaps and service penetrations.

Somewhere as small as Combe, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.

Big or small, you get the same 12-month guarantee in Combe and across Oxfordshire.

Place
Combe (OX29)
Region
Oxfordshire
Guarantee
12 months on all our work
Quote
Quoted before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

What the job involves on each surface

Service penetrations

Service penetrations are where new gaps often appear. Old or unsuitable filler comes out before the right sealant goes in over any backing the detail calls for.

Plasterboard walls

Holes in plasterboard are often cut roughly for services. Gaps that are too big for sealant alone need a different detail, and we will tell you.

Signs you need fire rated sealant in Combe

Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. We see plenty of fire stopping that was hurried particularly when it was the last job before handover.

Keep an eye out for these signs:

  • Ordinary sealant used where a fire-rated product was needed
  • Joints picked up in a fire-stopping survey
  • Linear gaps at the head of walls
  • Open holes round services passing through fire walls

Community buildings like St Laurence's Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.

Comparing quotes

  • What happens if the job turns out different
  • How much experience the applicator has
  • What product goes in the joint
  • How the surfaces are prepared before sealing

Choosing a sealant specialist

Why deal with it now?

Sealant is not the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We’ll say so if a gap needs something other than sealant. In a small place like Combe, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

Combining jobs into one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll give you a clear quote for the lot.

Why Combe clients choose us

  • We never seal over old sealant
  • Approved under the ARBOMaster scheme
  • One-year guarantee on every job
  • We are fully insured

Read how sealant jobs are priced or customer reviews.

What affects the quote in Combe

The price is agreed before any work begins. It takes into account:

  • Any working-time requirements on site
  • How many areas need sealing
  • The old material and how stubborn it is
  • The product the joint needs

The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.

Asking for a quote

You do not need to know the technical terms. It helps if you can tell us:

  • Any access issues, like height or stairs
  • Whether it’s a home or a business
  • Roughly how big the job is
  • Pictures of the joints, sent by email

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.

What we do, step by step

When we arrive, we look over the joints with you first. We protect the surfaces around the joints before any work begins. Most jobs take a few hours for a handful of gaps, and longer for a whole building. Somewhere like Combe needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. We plan the order of work and access, floor by floor or flat by flat.
  2. We take out any damaged or unsuitable sealant.
  3. Dust and loose debris are cleaned from each gap.
  4. We apply and tool the sealant to the product’s tested detail.
  5. Locations and products are written up and any gaps unsuitable for sealant are flagged.

Preparing for the visit

  • Mention if the joints have been sealed before
  • Tell us about access, such as stairs, a lift or high-level joints
  • Clear items away from the joints we’re working on

Get a quote

Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved.

Ask for a quote

Read more

Landlords, agents and businesses in Combe

Letting agents often deal with us directly. Tell us the address, the job and how access works and we will quote.

If you manage several properties in or around Combe, several properties can go on one quote. Just tell us the addresses and what each one needs.

FAQs for Combe

Do you cover smaller places like Combe?

Yes. Combe is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can you help a landlord with a rental near Combe station?

Yes. We work for landlords and letting agents as well as homeowners. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.

Is there a guarantee?

Yes. Every job comes with a 12-month guarantee.

Can I use normal mastic around a pipe through a fire wall?

No. It might close the gap, but it isn’t a fire-rated seal. Use a product tested for that gap and service and we can apply it for you.

Where is Mr Mastic based?

Mr Mastic is based in Crawley. We cover Combe and the rest of Oxfordshire, along with the rest of our area.

Can I add another job to the visit?

Of course. Combining jobs makes good use of the visit.

What do you put in the joint?

Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.

Do you do fire sealant around door frames?

Yes. We often seal open gaps hidden behind the architrave. Doors, seals and closers need a door specialist.

Workplaces and buildings in Combe

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

Managing a site like Combe CofE Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices. Letting a property close to Combe station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.

Combe is about 5 miles north-east of Witney, in Oxfordshire. Whether you’re in the middle of Combe or further out, fire rated sealant is available for homes and businesses alike. Our area takes in 443 places across Oxfordshire, large and small. You can also see our page for Oxford, roughly 10 miles from Combe.

Jobs for fire rated sealant in OX29 is quoted and booked the same way as anywhere else. Local streets include Square Firs, Chatterpie Lane and Orchard Close. Neighbouring places we cover for fire rated sealant include East End (1 mile south-west), Stonesfield (1 mile north-west), Freeland (2 miles south), North Leigh (2 miles south-west) and Fawler (3 miles west). We also work in nearby towns such as Oxford (10 miles south-east), Banbury (15 miles north), Bicester (11 miles east), Abingdon-on-Thames (13 miles south-east), Witney (5 miles south-west) and Carterton (10 miles south-west).

Around Combe

Typical jobs here are in homes near The Cock Inn and the streets around them. Combe’s nearest station is Combe station, roughly 0.8 miles south-east of the centre. Other landmarks nearby include Morris Motors Museum (1.8 miles south-east). Green spaces nearby include Blenheim Farm.

Map of Combe © OpenStreetMap contributors

What sealant work can’t fix

We won’t take on work that will not last, so here’s what sealant can’t put right:

  • Fire doors that need new seals, closers or hardware
  • Walls or floors that weren’t built to resist fire
  • Large holes that need a different fire-stopping system

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly.

Joints and surfaces we work on

  • Linear gaps
  • Plasterboard & masonry
  • Pipe & cable gaps
  • Door frames
  • Flats & HMOs
  • Service penetrations
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job