Oxfordshire · England

Combe Glazing Silicone

Glazing silicone for Combe and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Failed joints on frameless glass
  • Silicone pulling away from the glass
  • Leaks from the base of a shower screen

Trusted glazing silicone in Combe

Windows and doors in Combe

Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Blenheim Palace (about 1.9 miles east) are a reminder that the area around Combe has older buildings as well as new. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic.

For an older house near a landmark such as St Laurence's Church, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint. Rented homes near Combe station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows.

Combe is about 5 miles north-east of Witney, in Oxfordshire. Jobs in Combe get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Combe is one of 443 towns and villages in Oxfordshire we cover for glazing silicone. We also work in Oxford, about 10 miles from Combe.

Work in OX29 is quoted and booked the same way as anywhere else. Local streets include Square Firs, Chatterpie Lane and Orchard Close. Close by, we work in East End (1 mile south-west), Stonesfield (1 mile north-west), Freeland (2 miles south), North Leigh (2 miles south-west) and Fawler (3 miles west). Larger places within reach include Oxford (10 miles south-east), Banbury (15 miles north), Bicester (11 miles east), Abingdon-on-Thames (13 miles south-east), Witney (5 miles south-west) and Carterton (10 miles south-west).

Around Combe

Around Combe, our work takes us to homes and buildings near The Cock Inn. The closest station to Combe is Combe station, about 0.8 miles south-east of the centre. Other landmarks nearby include Morris Motors Museum (1.8 miles south-east). Green spaces nearby include Blenheim Farm.

Map of Combe © OpenStreetMap contributors

Glazing silicone in Combe, done properly

A frameless shower screen depends on its silicone. Leaks normally come from the wall joint or the tray joint, and we reseal both. Typical jobs include stained, discoloured glazing silicone and split or lifting silicone on glass, across glass-to-frame joints, conservatory frames and glass-to-glass joints.

Homes in small places like Combe often stand in the open, with little to shelter their windows from wind and rain. Exposed frames and sills lose their mastic sooner than sheltered ones.

We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Location
Combe (OX29)
Wider area
Oxfordshire
Guarantee
A year, on every job
Quotes
A clear price before work begins
Phone
0345 464 0079
Last updated
26 October 2026

How the job changes by surface

Rooflights

Rooflight glazing joints are cut out and renewed. Leaks from the roof itself need a roofer.

Glass balustrade bases

The base of a glass balustrade is usually sealed. When it fails, water can sit in the channel.

DIY sealant or a professional job?

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.

For landlords and businesses

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.

Combe: your questions answered

Do you work for landlords with property near Combe station?

Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.

Is Combe in your area for glazing silicone?

Yes, Combe is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.

Do the sealants smell?

There can be a smell while the sealant cures. Opening a window helps.

What sealant do you use on glazing?

We pick a glazing silicone to suit the materials. Neutral-cure products suit most glass and frames, as some acetoxy types can attack certain metals.

Why not top up the existing silicone?

It doesn’t last. The new bead cannot grip the old one so we take it all out and start clean.

Are you ARBOMaster approved?

Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.

Do you fit new glass or sealed units?

That’s not something we do. Misting between panes means the sealed unit has failed, and a glazier needs to replace it.

Do you guarantee glazing sealant work?

Our one-year guarantee covers every job.

Leave it or put it right?

You don’t need new glazing because the sealant has gone. If the glass and frame are sound, new silicone is often all it takes, and we’ll tell you if that is not the case. Where a wall is exposed, as many are in small places like Combe, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.

Why book with us

  • Sanitary silicone with an anti-fungal additive in wet areas
  • More than 20 years in sealant work
  • One-year guarantee on every job
  • Tidy, careful work

Read what affects the cost and our reviews.

What affects the cost of glazing silicone

The quote reflects the job in front of us. We look at:

  • The type of sealant required
  • When we can work, for business premises
  • The number of rooms or windows
  • Access and height

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, call 0345 464 0079 or send us an email for an honest opinion and a quote.

Asking for a quote

There’s no need for technical detail. Just tell us:

  • Where the job is, and your postcode
  • Pictures of the joints, sent by email
  • How we’d reach the joints
  • The rough size of the job

There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or drop us an email.

What happens on the day

The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job usually takes a few hours, depending on how many joints need doing. For a village or hamlet like Combe, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. We trace the leak and confirm it’s a sealant joint.
  2. We remove the old sealant carefully.
  3. We clean the glass and frame so the new silicone bonds.
  4. We lay the new bead and tool it smooth.
  5. We check the finished joints and test with water where it’s safe.

How to prepare

  • Tell us if parking is tricky
  • Clear items away from the joints we’re working on
  • Keep pets and children clear of the area while we work

Get a quote

Getting a quote is simple: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we will come back to you with a quote.

Ask for a quote

Read more

What we’re called out for in Combe

The wrong sealant is a common cause. Not every silicone sticks properly to glass and vinegar-smelling acetoxy silicone can attack some metals.

Common reasons people contact us are:

  • Water escaping where a screen meets the wall
  • Cracked silicone between glass panels
  • Failed sealant around rooflight glass
  • Water getting into a conservatory at the joints

If you look after a building such as Combe CofE Primary School, larger buildings have plenty of frames, and the mastic around each one ages.

Before you book anyone

  • How the surfaces are prepared before sealing
  • Whether they’re fully insured
  • What product goes in the joint
  • How much experience the applicator has

Choosing a sealant specialist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job