South Lanarkshire · Scotland

Climpy Fire Rated Sealant

Our applicators work in Climpy on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly.

Seals cut through by electricians, plumbers or data installers
Gaps flagged on a fire risk assessment
Open joints along the top of partitions

Trusted fire rated sealant in Climpy

Email us

Get a quick quote

What affects the cost of fire rated sealant

There’s no set price list. The quote depends on:

Whether the work is at height
Mould in or behind the old joints
How much old sealant there is and how hard it is to remove
The size of the job

A failed joint rarely gets cheaper to fix by waiting. If you are unsure, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.

What to tell us for a quote

What to tell us when you ask for a quote:

Whether it has been sealed before
How many joints, rooms or windows are involved
A few photos by email, if you can
What’s wrong with the joints now

For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.

About our fire rated sealant in Climpy

In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. We seal them with a product tested for that kind of gap. If you’re dealing with old fire sealant that has split or come away and open gaps behind door architraves, we can help.

If you look after holiday lets, a guest house or a community building in or near Climpy, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.

We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

Place: Climpy (ML11)
Region: South Lanarkshire
Guarantee: One year on every job
Price: A clear quote up front
Email: info@mrmastic.co.uk
Last updated: 26 October 2026

The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

What the job involves on each surface

Masonry and concrete

Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing.

Flats and HMOs

Conversions normally leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product and the locations noted.

How the visit works

When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Climpy may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

First we work through your list or survey, measuring each gap and checking what it’s formed in.
Anything that is not fit for the job comes out, and the gap is cleaned.
Backing or fill is fitted where the product’s tested detail calls for it.
The sealant goes in to the depth its detail sets, then it’s tooled off.
Finally, we list where we worked and what we used, for your records.

Getting ready for the visit

On commercial sites, let us know about site rules
Clear items away from the joints we’re working on
Mention any parking rules near the property

Get a quote

Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.

Get a quick quote

Related advice

FAQs for Climpy

Is Climpy within the area you cover?

Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.

Do you work for landlords with property near Fauldhouse station?

Yes. We work for letting agents and landlords as well as householders. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we will send you a clear quote.

Do you provide details of the products used?

Yes. Every gap we seal is listed with the product used, so you have it on file.

Where are you based?

Our base is Crawley. Our area covers South East England, London and Scotland.

Does someone need to be in?

It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.

Can you tell me which gaps need fire stopping?

No. That is for a fire risk assessor, designer or building control. Our job is applying the sealant to their specification.

Do you seal gaps around fire door frames?

Yes. We often seal open gaps hidden behind the architrave. Doors, seals and closers need a door specialist.

Is there any odour?

Possibly a little. It fades as the sealant cures.

Honest limits

We’ll always be straight with you, so here’s what new sealant won’t do:

Doors that are not fire doors in the first place
Openings too large for sealant, which need batts, boards or another system
A wall that isn’t a fire-resisting element to begin with

If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.

Surfaces we seal

Linear gaps
Service penetrations
Plasterboard & masonry
Door frames
Flats & HMOs
Pipe & cable gaps

Aftercare tips

Good habits help new joints last longer. A few tips:

Plan fire stopping into any work that goes through walls or floors
Include hidden areas like risers in routine checks
Make resealing part of every contractor’s brief
Check whether a sealant can be painted before decorating over it

Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.

Open gaps don’t only matter in a fire: noise, draughts and even pests can come through too. Sealing them early helps on every front.

What fire rated sealant looks like in Climpy

Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.

For landlords with property near Fauldhouse station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Around Climpy, as everywhere, fire rated sealant is only as good as the preparation behind it.

Climpy is about 6 miles north-east of Carluke, in South Lanarkshire. From the centre of Climpy to the outskirts, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Climpy is one of 139 places in South Lanarkshire we cover for fire rated sealant. For nearby work, see our Edinburgh page (23 miles or so).

We cover every part of ML11 for fire rated sealant and the streets around it. Nearby, we also carry out fire rated sealant in Greenwall (1 mile south-east), Forth (1 mile south-east), Wilsontown (1 mile east), Haywood (3 miles east) and Braehead (3 miles south-east). Further out, we also cover Hamilton (14 miles west), Uddingston (15 miles west), Blantyre (15 miles west), Larkhall (11 miles west), Carluke (6 miles south-west) and Lanark (8 miles south).

Around Climpy

For rail, the closest station is Fauldhouse station, about 3 miles north. Nearby you will also find Law Hospital (6 miles west).

What happens if it’s left?

If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up gives you evidence that the item was dealt with. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.

Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.