Kent · England
Fire Rated Sealant in Chilham
Our applicators work in Chilham on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Linear gaps at the head of walls
- Unsealed gaps around fire door frames
- Fire seals that have cracked with movement
Fire rated sealant in Chilham
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. Common call-outs are for unsealed gaps around fire door frames and fire stopping disturbed by later work, across pipe & cable gaps, linear gaps and plasterboard & masonry.
If you have holiday lets, a converted barn used for business or a community building near Chilham, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Where
- Chilham (CT4)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Why it’s worth doing now in Chilham
Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job that doesn’t depend on other work. Older cottages and farmhouses around Chilham can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Why us?
- Fully insured
- Old sealant always removed completely
- More than 20 years in sealant work
- We leave the area clean and tidy
Surface by surface
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. The sealant has to be one tested in plasterboard for each gap size.
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length leaving no stretch unsealed.
How it works
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes anything from a few hours to several days, depending on how many gaps there are, and the area is left clean. For a village or hamlet like Chilham, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Clear items away from the joints we’re working on
- Tell us if parking is tricky
- Let us know about earlier repairs to the joints
Ask for a quote
Every job is quoted individually. Just phone 0345 464 0079 or email us with the details, and pictures are welcome.
Advice
What affects the quote in Chilham
Every job gets its own quote. This is what makes a difference:
- Any mould that needs treating
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- Working hours on commercial sites
A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, call 0345 464 0079 or email us for an honest opinion and a quote.
Asking for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
- What the problem is, such as mould, gaps, leaks or cracking
We don’t publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, phone 0345 464 0079 or drop us an email.
Your questions about fire rated sealant in Chilham
I let a flat near Chilham station. Can you help?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear quote.
Will you come out to Chilham?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
How long does the job take?
Typically it takes from a few hours to a few days, depending on the number of gaps and the access. Bigger jobs take longer, and we will tell you how long to expect.
Will you assess my building’s fire safety?
No. We follow the requirements from your assessor, designer or building control.
Is it worth trying it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Do you provide details of the products used?
Yes. We note each location and the product that went in so it’s there for the next inspection.
Can I use normal mastic around a pipe through a fire wall?
No. Where a fire-rated seal is needed, it has to be a product tested for that use fitted to the maker’s details.
Do you have insurance?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Landlord and commercial work in Chilham
Housing providers, facilities teams and property managers book us too in Chilham and across Kent. We can quote a run of properties together, and we are fully insured for the work.
Landlords and letting agents in Chilham can book us as well as householders. Sealant work between tenants keeps a property looking cared for.
Fire rated sealant in Chilham: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
Letting a property close to Chilham station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Chilham is about 5 miles south-west of Canterbury, in Kent. Jobs in Chilham get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Chilham is one of 922 places in Kent where we work. Chelmsford is on our list too, about 40 miles from Chilham.
All of CT4 is covered for fire rated sealant, from the main roads to the quietest streets. Whether your property is on The Street, The Square and Bagham Road or a nearby road, we can help. Close by, we work in Mountain Street (1 mile south-west), Old Wives Lees (1 mile north), Godmersham (2 miles south), Shottenden (2 miles west) and Perrywood (2 miles north-west). We also work in nearby towns such as Ashford (8 miles south-west), Canterbury (5 miles north-east), Sittingbourne (12 miles north-west), Folkestone (14 miles south-east), Whitstable (8 miles north) and Faversham (6 miles north-west).
What’s near Chilham
Typical jobs here are in homes near Woolpack Inn and Broadham Down and the streets around them. Chilham has its own railway station: Chilham station. Other landmarks nearby include Kent and Canterbury Hospital (5.3 miles east) and Chilham Castle (less than half a mile west). Open spaces near Chilham include Blean Woods RSPB Reserve.
What sealant work can’t fix
To be straight with you, some problems need a different trade:
- Fire doors that need new seals, closers or hardware
- Big openings where sealant alone isn’t the tested solution
- Assessing a building’s fire safety
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Where we work in Chilham
- Pipe & cable gaps
- Plasterboard & masonry
- Linear gaps
- Flats & HMOs
- Service penetrations
- Door frames
When to call us in Chilham
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
The most common problems we see are:
- Linear gaps at the head of walls
- Open gaps behind door architraves
- Cracked or shrunken fire-rated sealant
- Gaps left after a refit or conversion
For buildings such as Church of St Mary, older buildings that have had new heating or wiring often have service gaps worth checking.
Questions to ask before booking
- What insurance they hold
- What the cure time is
- How the surfaces are prepared before sealing
- How the colour is chosen