Hampshire · England
Bramshill Fire Rated Sealant
Fire-stopping gaps in Bramshill need attention? We remove the old material, prepare the joints and seal them properly.
- Open gaps behind door architraves
- Gaps where walls meet ceilings or slabs
- Ordinary sealant used where a fire-rated product was needed
Fire rated sealant for homes and businesses in Bramshill
A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That is the part we focus on, one gap at a time. If you’re dealing with open joints along the top of partitions and unsealed gaps where pipes and cables go through a wall, we can put it right, whatever the surface.
Work in a small place like Bramshill is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Bramshill (RG27)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Signs you need fire rated sealant in Bramshill
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
These are the problems we are asked about most:
- Linear gaps at the head of walls
- Standard silicone or caulk in a fire-stopping gap
- New service routes left unsealed after building work
- Open gaps behind door architraves
Community buildings like Mission Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Questions to ask before you book
- How the colour is chosen
- How the joint is cleaned and prepared
- Whether VAT is included
- What product goes in the joint
Bramshill questions
Do you cover Bramshill for fire rated sealant?
Yes. Our work covers London and the South East, and Bramshill is part of that. Just ring 0345 464 0079 or email us with a few details of the job.
I let a flat near Winchfield station. Can you help?
Yes. We work for landlords and agents as well as householders, and several properties can go on one quote. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent types expand when heated, and they’re one of the options. The specification and the tested detail decide which is used.
Do you do fire sealant around door frames?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame, and we will mention anything we notice about the door.
Is there a guarantee?
Yes, for a year. If anything is not right with the work within the year, let us know and we will sort it.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Can you give us a record of the work?
Yes. Locations and products are written up when we finish. If you need pictures or a set layout, ask when you get a quote.
Places near Bramshill
More services for Bramshill
Workplaces and buildings in Bramshill
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Letting a property close to Winchfield station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Bramshill is about 4 miles west of Yateley, in Hampshire. We provide fire rated sealant to homes and businesses in Bramshill and nearby, as part of our work across Hampshire. Bramshill is one of 683 towns and villages in Hampshire we cover. For nearby work, see our Reading page (7 miles or so).
All of RG27 is covered for fire rated sealant, from the main roads to the quietest streets. We also cover the places around Bramshill: Hazeley (1 mile south), Heckfield Heath (1 mile west), Heckfield (1 mile west), Hound Green (2 miles south-west) and Riseley (2 miles north-west). Within a short drive, we also cover Basingstoke (9 miles south-west), Farnborough (8 miles south-east), Fleet (6 miles south-east), Aldershot (10 miles south-east), Alton (14 miles south) and Yateley (4 miles east).
Landmarks near Bramshill
We work in homes and buildings around Wellington Country Park and the streets around them. The nearest railway station is Winchfield station, about 4.3 miles south. Other landmarks nearby include Fleet Community Hospital (5.3 miles south-east) and Beaumys Castle (3.1 miles north-west). The countryside around Bramshill includes Horseshoe Lake and The Marshes Local Nature Reserve.
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
How it works
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes a few hours for a handful of gaps, and longer for a whole building, including the tidy-up. Somewhere as small as Bramshill, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
Getting ready for the visit
- Move anything stored near the joints
- Keep children and pets away from the work area
- Tell us if parking is tricky
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.
Advice
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
How the job changes by surface
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first so the seal has something sound to bond to.
Service penetrations
Different services need different details: metal pipes, cables and plastic pipes are not treated the same. Each one is sealed to the product’s tested detail, and tell you if sealant alone is not the right fix.
Looking after it afterwards
How long the joints last depends on use and care. Here’s what we suggest:
- Get damaged fire seals looked at promptly
- Take photos of fire stopping before ceilings or boxing go back
- Plan fire stopping into any work that goes through walls or floors
- Do not paint over fire sealant until it has cured
Include fire stopping in your regular building checks. Watch for cracking, gaps or seals that have been disturbed and have them put right.
Open gaps don’t only matter in a fire: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
How we quote for fire rated sealant
Your quote is based on your job. We look at:
- How much old sealant there is and how hard it is to remove
- Whether the work is at height
- The product the joint needs
- The size of the job
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- Where the property is
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
- A few pictures by email, if you can
For a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.