Kent · England
Fire-rated sealant in Boughton Aluph, Kent
Fire rated sealant for Boughton Aluph, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Holes left by a change of layout
- Standard silicone or caulk in a fire-stopping gap
- Seals cut through by electricians, plumbers or data installers
Different surfaces, different methods
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. The sealant has to be one tested in plasterboard for each gap size.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
Fire rated sealant in Boughton Aluph, done properly
Bigger jobs can be worked through in stages, flat by flat or floor by floor. That record is useful for your files and for whoever looks at the building next. If you are dealing with damaged fire sealant left by other trades and linear gaps at the head of walls, we can put it right, whatever the surface.
For a small place like Boughton Aluph, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
We stand behind the work with a 12-month guarantee.
- Place
- Boughton Aluph (TN25)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Common problems we fix in Boughton Aluph
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
It’s worth asking for a quote if you see:
- Joints picked up in a fire-stopping survey
- Fire seals that have cracked with movement
- Door frames with gaps between frame and wall
- Open joints along the top of partitions
Community buildings like All Saints’ Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- Are they insured?
- What the cure time is
- How the colour is chosen
- Who does the work, and how experienced they are
What happens if it’s left?
Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Around Boughton Aluph, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Why us?
- Tidy, careful work
- An ARBOMaster approved applicator
- Anti-fungal silicone where joints get wet
- Experience in homes, commercial sites and hotels
Take a look at what affects the cost and what customers say.
Fire rated sealant around Boughton Aluph
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Schools such as Wye School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment. Rented homes near Wye station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Boughton Aluph is about 4 miles north-east of Ashford, in Kent. Anywhere in TN25, we cover fire rated sealant for homes and businesses. Across Kent, we cover 922 places, and Boughton Aluph is one of them. You can also see our page for Chelmsford, about 42 miles away.
Here we cover the TN25 postcode area for fire rated sealant. Other places close to Boughton Aluph include Boughton Corner (1 mile east), Kempe's Corner (1 mile south), Wye (1 mile south-east), Brook (3 miles south-east) and Hassell Street (4 miles east). We also work in nearby towns such as Ashford (4 miles south-west), Canterbury (9 miles north-east), Sittingbourne (13 miles north-west), Folkestone (13 miles south-east), Whitstable (12 miles north-east) and Faversham (8 miles north).
What’s near Boughton Aluph
Locally, jobs take us to homes and businesses close to Flying Horse Inn and the streets around them. Boughton Aluph’s nearest station is Wye station, roughly 1 mile south-east of the centre. Nearby you will also find William Harvey Hospital (3.7 miles south) and Tower keep castle at Chilham (3.9 miles north-east). Not far away are Hatch Park.
Places near Boughton Aluph
Other services in Boughton Aluph
How we quote for fire rated sealant
Every job gets its own quote. This is what makes a difference:
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
- The number of rooms or windows
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we’ll explain what it covers.
Helping us quote
To make quoting easier, let us know:
- How we’d reach the joints
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- Where the property is
For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before we start.
Landlord and commercial work in Boughton Aluph
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.
How it works
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes from a few hours to a few days, depending on the number of gaps and the access and we leave things clean and tidy. In a small place like Boughton Aluph, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Getting ready for the visit
- Tell us about any water getting in
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
How to get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.
Related advice
FAQs for Boughton Aluph
Is Boughton Aluph within the area you cover?
Yes, Boughton Aluph is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do fire rated sealant in Boughton Aluph?
Yes. We work across London and the South East, and Boughton Aluph is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
How long does fire rated sealant take?
It depends on the size of the job, but as a guide it takes a few hours for a handful of gaps, and longer for a whole building. We’ll give you a better idea when we quote.
Can you tell me how many minutes the seal will last?
We don’t give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we apply a product tested for it.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in.
Do you work in flats, HMOs and commercial buildings?
Yes. Occupied flats, HMOs, offices and schools are all fine, with access planned around residents or staff. Out-of-hours work can be arranged if that suits the building.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.