Scottish Borders · Scotland
Fire Rated Sealant in Bonchester Bridge
Problem with your fire-stopping gaps in Bonchester Bridge? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Door frames with gaps between frame and wall
- Holes left by a change of layout
- Cracked or shrunken fire-rated sealant
Fire rated sealant in Bonchester Bridge, done properly
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment for buildings in Bonchester Bridge. Send us the list or the survey and we will quote for the fire-rated sealant work on it. If you have open joints along the top of partitions and ordinary sealant used where a fire-rated product was needed, we can put it right, on plasterboard & masonry, door frames and service penetrations alike.
If you look after holiday lets, a guest house or a community building in or near Bonchester Bridge, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Location
- Bonchester Bridge (TD9)
- Region
- Scottish Borders
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How the visit works
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and tidy away. Most jobs take a few hours for a handful of gaps, and longer for a whole building. Around Bonchester Bridge, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Before we arrive
- Mention any tricky access
- Tell us if parking is tricky
- Plan for the work area to be out of bounds to pets and children
Get a quote
We quote each job on its own, so the first step is telling us about yours. Simply email us at info@mrmastic.co.uk and describe the job.
Related advice
More services for Bonchester Bridge
Fire rated sealant around Bonchester Bridge
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we don’t certify buildings or carry out fire risk assessments.
For buildings such as Hobkirk, service openings in its walls need the right fire-rated sealant, as in any building.
Bonchester Bridge is about 6 miles east of Hawick, in the Scottish Borders. Wherever you are in the TD9 postcode area, our applicators can take on fire rated sealant. Bonchester Bridge is one of 89 places in the Scottish Borders where we work for fire rated sealant. We also work in Edinburgh, around 43 miles away.
Postcode districts we cover here for fire rated sealant: TD9. Whether your property is on Forest Road and Wauchope Road or anywhere close by, we can help. Neighbouring places we cover for fire rated sealant include Denholm (4 miles north), Burnfoot (5 miles north-west), Hawick (6 miles west), Wilton (6 miles west) and Stirches (6 miles north-west). Larger places within reach include Selkirk (13 miles north-west), Jedburgh (7 miles north-east), Melrose (14 miles north), St Boswells (12 miles north), Tweedbank (15 miles north) and Newtown St Boswells (13 miles north).
Near you in Bonchester Bridge
Well-known places in the area include Hawick Community Hospital (5.8 miles west) and Fulton Tower (2.8 miles north-east). Not far away are Bonchester Hill.
Aftercare tips
Looking after new joints is easy:
- Tell trades working in the building that fire seals must be put back
- Don’t paint over fire sealant until it has cured
- Check risers, ceiling voids and cupboards during building checks
- Report cracked or damaged seals as soon as you notice them
Include fire stopping in your regular building checks. Watch for cracking, gaps or seals that have been disturbed and get them seen to.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record.
Can I do it myself?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
When to call us in Bonchester Bridge
Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It looks sealed, but it is not fire-rated.
The most common problems we see are:
- Unsealed gaps around fire door frames
- Open joints along the top of partitions
- Gaps flagged on a fire risk assessment
- Seals cut through by electricians, plumbers or data installers
Around Bonchester Bridge, as everywhere, fire rated sealant is only as good as the preparation behind it.
What your quote should include
- When the joint can take water or movement
- What happens if they find a problem under the old sealant
- Whether all the old sealant comes out first
- How the surfaces are prepared before sealing
What affects the quote in Bonchester Bridge
The quote reflects the job in front of us. We look at:
- The number and length of the joints
- How much old sealant there is and how hard it is to remove
- How many areas need sealing
- Any mould that needs treating
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll explain what it covers.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- A few photos by email, if you can
- The address or postcode of the job
- The type of property
- Any access issues, like height or stairs
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.
What sealant work cannot fix
We’ll always be straight with you, so here’s what new sealant will not do:
- Walls or floors that weren’t built to resist fire
- Sign-off of the building, which sits with building control or your assessor
- Assessing a building’s fire safety
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly before you book.
Where we work in Bonchester Bridge
- Plasterboard & masonry
- Linear gaps
- Service penetrations
- Door frames
- Flats & HMOs
- Pipe & cable gaps
What happens if it’s left?
If an assessor has flagged gaps, it makes sense to close them before the next review. Having them sealed and recorded now gives you evidence that the item was dealt with. In a place like Bonchester Bridge, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
Doing several joints on one visit is usually more efficient than separate visits. We’ll send you a clear quote for the lot.
Why Bonchester Bridge clients choose us
- Over 20 years’ experience
- We leave the area clean and tidy
- Old sealant always removed completely
- Arbo and Everbuild products
Read what affects the cost and what customers say.
Your questions about fire rated sealant in Bonchester Bridge
Do Scottish building rules affect fire-rated sealant work in Bonchester Bridge?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can you do fire rated sealant in Bonchester Bridge?
Yes, Bonchester Bridge is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
Do you guarantee your work?
Yes, always. Each job is guaranteed for twelve months, wherever you are.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Can I use normal mastic around a pipe through a fire wall?
No. A gap that needs fire stopping needs a tested fire-rated product.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Is it OK to seal over old sealant?
No. New silicone will not bond to old silicone, and anything trapped underneath, including mould and water, stays there. We remove it all first.